Citroen C4 2016 2.G Owner's Manual

199
C4-2_en_Chap06_conduite_ed02-2015
Switching on
F If  the   speed   setting   is   suitable   (last   speed  s
etting   programmed   in   the   system)   press  
b

utton 4   to   switch   the   speed   limiter   on.
F

T
urn the wheel 1 to the "LIMIT"
position
to   select   the   speed   limiter;   the   function   is  
pa

used.
F  
P
ressing   button   4   temporarily   interrupts   the  
f

unction
 (
pause).
Adjusting the limit speed
setting
You do not have to switch the speed limiter on in   order   to   set   the   speed. To
  modify   the   limit   speed   setting   from   the  
c

urrent   speed   of   the   vehicle:
F
 
i
n   steps   of   +/-   1   mph   (km/h),   make  
s

uccessive short presses on button 2 or 3,
F
 
c
ontinuously,   in   steps   of   +/-   5   mph   (km/h),  
p

ress and hold button 2 or 3.
To
  modify   the   limit   speed   setting   using  
m

emorised   speeds   and   from   the   touch   screen  
t

ablet:
F

p
ress button 5   to   display   the   six   memorised  
s

peed
 se
ttings,
F

p
ress the button for the desired speed
setting.
This
  setting   becomes   the   new   limit   speed.
To
  modify   the   limit   speed   setting   using  
m

emorised  
s
peeds  
a
nd  
f
rom  
y
our  
A
udio  
s
ystem  
(

only   with   the   monochrome   screen   C):
F
 
w
ith   the   system   first   activated.
For
  more   information   on   memorising   speeds,  
r

efer   to   the   corresponding   section.
F
 
m
ake   a   long   press   on   button   2 or 3, the
system
  displays   the   memorised   speed  
c

losest   to   the   actual   speed   of   the   vehicle;  
t

his   setting   becomes   the   new   limit   speed.
F
 
t
o   choose   another   memorised   speed,   make  
a

nother   long   press   on   button   2 or 3.
6
Driving

200
C4-2_en_Chap06_conduite_ed02-2015
On a steep descent or in the event of
sharp  acceleration,   the   speed   limiter  
w

ill not be able to prevent the vehicle
from
  exceeding   the   programmed   speed. The
  use   of   mats   not   approved   by  
C

ITROËN   may   inter fere   with   the  o
peration   of   the   speed   limiter.
To   avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   positioned  
c

o r r e c t l y,
-
 
d
o   not   fit   one   mat   on   top   of   another.
Temporarily exceeding the
programmed speed
F If  you   want   to   temporarily   exceed   the  p
rogrammed   limit   speed,   press   firmly on
the
  accelerator   pedal,   going   beyond   the  
p

oint of resistance .
The
  speed   limiter   is   deactivated   temporarily  
a

nd   the   displayed   programmed   speed   flashes.
Switching off
When the limit speed is exceeded but is not due to action by the driver, there is an audible
signal
  to   complete   the   alert.
Once the speed of the vehicle returns to
the
  programmed   setting,   the   speed   limiter  
f

unctions   again:   the   display   of   the   programmed  
s

peed   setting   becomes   steady   again.
F

T
urn wheel 1 to the "0"
 
position:   the  
d

isplay   of   information   on   the   speed   limiter  
d

isappears.
Operating fault
Flashing dashes indicate a fault with the speed limiter.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Driving

201
C4-2_en_Chap06_conduite_ed02-2015
Cruise control
1. Cruise  control   mode   selection   wheel.
2. B utton   for   setting   the   current   speed   of   the  
v

ehicle   as   the   cruise   setting   or   lowering   the  
c

ruise
 se
tting.
3.
 B

utton   for   setting   the   current   speed   of   the  
v

ehicle   as   the   cruise   setting   or   raising   the  
c

ruise
 se
tting.
4.
 C

ruise   control   pause   /   resume   button.
5.
 D

isplay   memorised   speed   settings   button.
Steering mounted controls
6. Cruise  control   pause   /   resume   indication.
7. C ruise   control   mode   selected   indication.
8.
 C

ruise   speed   setting.
9.
 S

electing   a   memorised   cruise   speed.
Displays in the instrument panel
The operation of the cruise control can be
interrupted (pause):
-
 
b
y   pressing   control   4   or   by   pressing   the  
b

rake   or   clutch   pedal,
-
 
a
utomatically,   if   operation   of   the   dynamic  
s

tability   control   system   is   triggered.
Switching
  off   the   ignition   cancels   any  
p

rogrammed   speed   setting.
The cruise control is switched on

manually.
It   requires   a   minimum   vehicle   speed   of  
2

5   mph   (40   km/h)   as   well   as:
-  
w
ith   a   manual   gearbox,   the  
e

ngagement   of   fourth   gear   or  
h

igher,
-  
w
ith   an   automatic   gearbox,   the   gear  
s

elector at position D or second
gear   or   higher   in   manual   mode.
System   which   automatically   maintains   the   cruising   speed   of   the   vehicle   at   a   setting   programmed   by  
t

he   driver,   without   any   action   on   the   accelerator   pedal.
The   cruise   control   system   is   a   driving   aid
 t

hat   cannot,   in   any   circumstances,   replace
 t

he   need   to   observe   speed   limits,   nor   the
 n

eed   for   vigilance   on   the   part   of   the   driver.As
  a   safety   measure,   you   are   advised  
t

o   keep   your   feet   near   the   pedals   at   all  
ti

mes.
6
Driving

202
C4-2_en_Chap06_conduite_ed02-2015
Switching on
F To start the cruise control and set a cruise speed, once the vehicle has reached the
desired speed, press button 2 or 3 :
  the  
c

urrent   speed   of   your   vehicle   becomes   the  
c

ruise   speed   setting.
 Y

ou   can   release   the   accelerator   pedal.
F

T
urn the wheel 1 to the "CRUISE"
position
to   select   cruise   control   mode;   the   function  
i

s   paused. F  
P
ressing   button   4 interrupts operation of
the   system   (pause).
Take   care:   pressing   and   holding  
b

utton 2 or 3 results   in   a   rapid   change  
i

n   the   speed   of   your   vehicle.
F
 
P
ressing   button   4   again   restores   operation  
o

f   the   cruise   control   (ON).
As   a   precaution,   it   is   recommended  
t

hat the cruise speed chosen be close
to the current speed of your vehicle, so
as to avoid any sudden acceleration or
deceleration   of   the   vehicle.
Adjusting the cruise speed
setting
The cruise control must be activated.
T o   modify   the   cruise   speed   setting   from   the  
c

urrent   speed   of   the   vehicle:
F
 
i
n   steps   of   +   or   -   1   mph   (km/h),   make  
r

epeated short presses on button 2 or 3,
F
 
c
ontinuously,   in   steps   of   +   or   -   5   mph  
(

km/h),   press   and   hold   button   2 or 3.
To
  modify   the   cruise   speed   setting   using  
m

emorised   speeds   and   from   the   touch   screen  
t

ablet:
F
p
ress button 5   to   display   the   six   memorised  
s

peed
 se
ttings,
F
p
ress the button for the desired speed
setting.
This   setting   becomes   the   new   cruise   speed.
To   modify   the   cruise   speed   setting   using  
m

emorised  
s
peeds  
a
nd  
f
rom  
y
our  
A
udio  
s
ystem  
(

only   with   the   monochrome   screen   C):
F
 
w
ith   the   system   first   activated.
For
  more   information   on   memorising   speeds,  
r

efer   to   the   corresponding   section.
F
 
m
ake   a   long   press   on   button   2 or 3, the
system
  displays   the   memorised   speed  
c

losest   to   the   actual   speed   of   the   vehicle;  
t

his   setting   becomes   the   new   cruise   speed.
F
 
t
o   choose   another   memorised   speed,   make  
a

nother   long   press   on   button   2 or 3.
Driving

203
C4-2_en_Chap06_conduite_ed02-2015
Temporarily exceeding the
programmed speed
When descending a steep hill, the cruise   control   system   cannot   prevent  
t

he   vehicle   from   exceeding   the  
pro

grammed
 s
peed.
When
  required   (overtaking   manoeuvre...),   it   is  
p

ossible   to   exceed   the   programmed   speed   by  
p

ressing   the   accelerator   pedal.
The
 
cruise   control   is   temporarily   overridden  
a

nd
 
the   programmed   speed   setting   flashes.
Only use the cruise control if the traffic
conditions will allow you to drive for a
certain   time   at   a   steady   speed   and   at   a  
s

afe   distance   from   the   vehicle   ahead.
Do not activate the cruise control in
urban   areas,   in   heavy   traffic,   on   winding  
o

r steep roads, on slippery or flooded
roads, or in conditions of poor visibility
(heavy   rain,   fog,   falling   snow...).
In   some   circumstances,   it   may   not  
b

e   possible   to   maintain   or   reach   the  
p

rogrammed   speed:   towing,   vehicle  
h

eavily   loaded,   steep   climb.
The   use   of   mats   not   approved   by  
C

ITROËN   may   inter fere   with   the  
o

peration   of   the   cruise   control.
To   avoid   any   risk   of   jamming   of   the  
ped

als:
-  e nsure   that   the   mat   is   positioned  c
o r r e c t l y,
-
 
n
ever   fit   one   mat   on   top   of   another.
To
 
return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
Once the vehicle has returned to the
programmed   speed,   the   cruise   control   takes  
ov

er
 
again:   the   display   of   the   programmed  
s

peed
  setting   becomes   steady   again.You   may   have   to   brake   to   control   the   speed   of  
y

our   vehicle.   In   this   case,   the   cruise   control   is  
au

tomatically
 p
aused.
To   activate   the   system   again,   press   button   4
.
Switching off
F Turn wheel 1 to the "0"  position:   the   cruise  c
ontrol   information   disappears   from   the  
sc

reen.
Operating fault
Flashing dashes indicate a fault with the cruise control   system.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
6
Driving

204
C4-2_en_Chap06_conduite_ed02-2015
Memorising speeds
"MEM" button
F Press this button to display the list of
memorised s peed se ttings.
As
 
a
 
safety
 
measure,
 
the
 
driver
 
must
 
o

nly
 
modify
 
a
 
speed
 
setting
 
when
 
s

tationary.
This
 
function
 
allows
 
speed
 
settings
 
to
 
be
 
registered
 
which
 
will
 
then
 
be
 
offered
 
as
 
settings
 
for
 
two
 
systems:   the   speed   limiter   (a   maximum   speed)   and  
t

he
 
cruise
 
control
 
(cruising
 
speed).
You
 
can
 
memorise
 
up
 
to
 
six
 
speed
 
settings
 
in
 
the
 
system,
 
depending
 
on
 
version.
 
By
 
default,
 
some
 
speed   settings   are   already   memorised.
Activating the function
Modifying a speed setting
With your Audio system
F Go
  to   the   main   menu   by   pressing   the  "
MENU"  button.
F
 
Sel
ect
 t
he"Personalisation-configuration"
 m

enu   and   confirm.
F
 
S
elect   " Vehicle   parameters"   menu   and  
c

onfirm.
F
 
S
elect   the   "Driving   assistance"   line   and  
c

onform.
F
 
S
elect   "Speeds   memorised"   line   and  
c

onfirm.
F
 
S
elect   "Activation"   to   activate   the   function.F
 S elect   the   speed   setting   to   be   modified   and  c
onfirm.
F
 
M
odify   the   speed   setting.
F

Sel
ect "OK"
  and   confirm   to   save   the  
m

odifications.
Driving

205
C4-2_en_Chap06_conduite_ed02-2015
Modifying a speed setting
F Press this button to select the "Driving "
  menu.
F
 
I
n   the   secondary   page,   press  
"S

peed settings ".
F
 
S

elect   the   system   for   which   you   want   to  
m

emorise   new   speed   settings:
●
 
s
peed   limiter
or
●
 
c
ruise   control.
F
 
C

hoose   the   speed   setting   to   be   modified.
"MEM" button
Press this button to select a speed settings for use   by   the   speed   limiter   or   cruise   control.
Refer
  to   the   corresponding   section.
With the touch screen
tablet
F Enter  the   new   value   using   the   numerical  k
eypad   and   confirm.
F
 
C
onfirm   to   save   the   modification   and   quit  
t

he   menu.
6
Driving

206
C4-2_en_Chap06_conduite_ed02-2015
Parking sensors
The system is switched on by engaging reverse ge a r.
This
  is   confirmed   by   an   audible   signal.
The
  system   is   switched   off   when   you   come   out  
o

f   reverse   gear.
Rear parking sensors
Audible assistance
The proximity information is given by an intermittent   audible   signal,   the   frequency   of   which i

ncreases   as   the   vehicle   approaches   the   obstacle.
The
  sound   emitted   by   the   speaker   (right   or   left)
 i

ndicates   the   side   on   which   the   obstacle   is   located.
When the distance between the vehicle and
the
  obstacle   becomes   less   than   approximately
 t

hirty   centimetres,   the   audible   signal   becomes
 c

ontinuous.Visual assistance
This supplements the audible signal by d isplaying   bars   in   the   screen   which   move  
p

rogressively   nearer   to   the   vehicle.
When
  the   obstacle   is   very   close,   the   "Danger"  
s

ymbol   is   displayed   in   the   screen.
This system c annot  i n  a ny  c ircumstances  r eplace t
he   need   for   vigilance   on   the   part   of   the   driver.
This system indicates the proximity of an obstacle   (person,   vehicle,   tree,   gate,   etc.)  
w

hich   comes   within   the   field   of   detection   of  
s

ensors   located   in   the   bumper.
Certain
  types   of   obstacle   (stake,   roadworks  
c

one,   etc.)   detected   initially   will   no   longer   be  
d

etected   at   the   end   of   the   manoeuvre,   if   they  
a

re   located   in   blind   spots   in   the   sensors'   field  
o

f   detection.
Driving

207
C4-2_en_Chap06_conduite_ed02-2015
In addition to the rear parking sensors, the front parking   sensors   are   triggered   when   an   obstacle i

s detected in front and the speed of the vehicle is
still
  below   6   mph   (10   km/h).
The
  front   parking   sensors   are   interrupted   if   the
 v

ehicle   stops   for   more   than   three   seconds   in
 f

or ward   gear,   if   no   further   obstacles   are   detected
 o

r   when   the   speed   of   the   vehicle   exceeds   6   mph
 (

10   km/h).
Front parking sensors
The function is deactivated by pressing this button.   The   indicator   lamp   in   the   button  
comes
  on.
Pressing
  this   button   again   reactivates   the  
f

unction.   The   indicator   lamp   in   the   button  
goes
  off.
Operating fault
In the event of a malfunction of the   system,   when   reverse   gear  
i

s   engaged   this   warning   lamp   is  
d

isplayed   in   the   instrument   panel  
a

nd/or   a   message   appears   in   the  
s

creen,   accompanied   by   an   audible  
s

ignal   (short   beep).
Contact a CITROËN dealer or a
qualified
 w

orkshop.
The
 
sound
 
emitted
 
by
 
the
 
speaker
 
(front
 
or
 
r

ear)
 
indicates
 
whether
 
the
 
obstacle
 
is
 
in
 
front
 
o

r
 
behind. The function will be deactivated
automatically
 
if
 
a
 
trailer
 
is
 
being
 
towed
 
o

r
 
a
 
bicycle
 
carrier
 
is
 
fitted
 
(vehicle
 
f

itted with a towbar or bicycle carrier
recommended
 
by
 
CITROËN). In bad weather or in winter, ensure
that the sensors are not covered with
mud,
  ice   or   snow.   When   reverse   gear   is  
e

ngaged,   an   audible   signal   (long   beep)  
i

ndicates   that   the   sensors   may   be   dirty.
Certain
  sound   sources   (motorcycle,  
l

orry,
  pneumatic   drill,   etc.)   may   trigger  
t

he
 
audible   signals   of   the   parking  
s

ensor   system.
Deactivation/Activation of the
front and rear parking sensors
6
Driving

208
C4-2_en_Chap07_infos-pratiques_ed02-2015
TOTAL & CITROËN
Partners in performance and
protecting the environment
Innovation in the search for
performance
For over 40 year, the TOTAL Research and
Development departments h ave d eveloped l

ubricants   for   CITROËN,   to   match   the   latest  
t

echnical innovations on CITROËN vehicles, both for
competition
  and   for   everyday   motoring.
For you, this is an assurance that you will obtain the
best
  per formance   from   your   engine.
Optimum protection for
your engine
By having your CITROËN vehicle serviced with TOTAL lubricants, you are
contributing
  towards   improving   the   life  
a

nd   per formance   of   your   engine,   while  
a

lso   protecting   the   environment.
Practical information