Citroen C4 RHD 2015 2.G Owner's Manual

05
249
TRAFFIC INFORMATION
Configure the filtering and display of TMC messages
TMC (Traffic Message Channel) messages with GPS Navigation provide traffic information in real time.
Press the TRAFFIC  
button
 
to
 
display
 
the
 
"

Traffic information"   menu.
Select the "Geographic filter" function
and
  confirm. The
  system   offers   a   choice   of:
-
 
"
Retain all the messages",
or
-
 
"
Retain the messages"
●
 
"
Around the vehicle",
  (confirm  
the

  mileage   to   modify   and   select  
the

  distance),
●
 
"
On the route".
Confirm
  "OK"   to   save   the   modifications.
We
  recommend:
-
 
a
  filter   on   the   route   and
-
 
a
  filter   around   the   vehicle   of:
-
 
12
  miles   (20   km)   in   urban   areas,
-
 
30
  miles   (50   km)   on   motorways.

05
250
TRAFFIC INFORMATION
Principal TMC symbols
Red and yellow triangle: traffic information, for example:
Black   and   blue   triangle:   general   information,   for   example:
Weather reports
Modified
  signage
Risk
  of   explosion Traffic
  reports
Narrow   carriageway
Road
  closed
Wind
Slippery surface
Demonstration Fog
Accident
Danger
Parking
d

elay
n

o entry Snow
  /   ice
Roadworks
Traffic
  jam
Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic   report  
is

  transmitted,   the   current   audio   source   (Radio,   CD,   USB,   ...)   is  
interrupted

  automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

  the   audio   source   resumes   at   the   end   of   the   transmission   of  
the message.Press

RADIO   to   display   the   menu.
Select "Service announcements" then
confirm.
Activate
  or   deactivate   "TA"
  then   confirm.
The
  volume   setting   for  
T
A
 
messages   can   be   adjusted   only   during   the  
transmission

  of   this   type   of   alert.
Activate
  or   deactivate   the   function   at   any   time   by   pressing  
the

  button.
During
  a   message,   press   the   button   to   interrupt   it.

06
251
USING THE TELEPHONE
Access to the "TELEPHONE" menu
"Telephone""Dial "
"Directory of contacts"
"Contacts management "
"Phone functions "
"Bluetooth functions "
"Hang up "
Go
  from   the   list   to   the   menu   (left/right).
or
List
 
of
 
recent
 
calls
 
sent
 
and  
received

 
with
 
the
 
telephone  
connected

 
to
 
the
 
system.
Press
 
this
 
button.
To
 
make
 
a
 
call,
 
select
 
a
 
number
 
in
 
the
 
list
 
and
 
confirm
 
" OK"
to
 
start
 
the
 
call.
Connecting
 
a
 
different
 
telephone
 
deletes
 
the
 
list
 
of
 
recent

 
calls. No
  telephone   connected.
Telephone
  connected.
Incoming
  call.
Outgoing
  call.
Synchronisation of
contacts
  in   progress.
Telephone call in
progress.
In the top bar of the permanent
display

06
252
Pairing a Bluetooth telephone
First connectionFor reasons of safety and because they require prolonged attention on  the   part   of   the   driver,   the   operations   for   pairing   the   Bluetooth  
mobile

  telephone   to   the   hands-free   system   of   the   audio   unit   must   be  
carried

  out   with   the  
vehicle stationary
.
In
 
the
 
Bluetooth
 
menu
 
of
 
your
 
telephone,
 
select
 
the
 
name

 
"C
ITR
o
Ë
n"
 
from
 
the
 
list
 
of
 
devices
 
detected. Press
  this   button.
Select "Bluetooth functions "
  and  
confirm.
Select "

Peripherals search "
  and  
confirm.
The

  list   of   peripheral   devices   detected  
is

  displayed.   Wait   until   the   "Connect"
button
  is   available.
USING THE TELEPHONE
You can check the compatibility of your telephone 
at   www.citroen.co.uk   (services).
Activate
  the   telephone's   Bluetooth   function  
and

  ensure   that   it   is   "visible   to   all"   (telephone  
configuration).
q
uick procedure from the telephone
Enter
  a   minimum   4   figure   code   in   the   telephone   and  
confirm.Enter

  the   same   code   in   the   system,  
select "

OK"   and   confirm. Procedure from the system

06
253
Select "Connect"
 
and
 
confirm.
The
 
system
 
offers
 
to
 
connect
 
the
 
telephone:
-

 
in

 
"Hands-free mode" (telephone
only),
-
 
in

 
"Audio"
 
mode
 
(streaming:
 
playing
 
music

 
files
 
on
 
the
 
telephone),
-
 
or

 
"All" (for selection of both
modes).
Select "OK"
 
and
 
confirm.
Then
 
accept
 
automatic
 
connection
 
on
 
the
 
telephone
 
to
 
allow
 
the
 
telephone

 
to
 
reconnect
 
automatically
 
every
 
time
 
the
 
vehicle
 
is
 
started.
The

 
ability
 
of
 
the
 
system
 
to
 
connect
 
in
 
only
 
one
 
mode
 
depends
 
on
 
the

 
telephone.
 
The

 
two
 
modes
 
may
 
both
 
connect
 
by
 
default.
USING THE TELEPHONE
The "Hands-free mode" should be used in preference if "Streaming"
  is   not   desired.
The
  services   available   depend   on   the   network,   the   SIM   card   and   the   compatibility   of   the   Bluetooth   telephone   used.   Check   the   telephone  
manual

  and   with   your   network   provider   for   details   of   the   services   available   to   you.
Depending   on   the   type   of   telephone,   the   system   will   ask   you   to  
accept

  or   not   the   transfer   of   your   contacts.
On   return   to   the   vehicle,the   last   telephone   connected  
automatically

  reconnects,   within   around   30   seconds   after  
switching

  on   the   ignition   (Bluetooth   activated   and   visible).
To
  modify   the   automatic   connection   mode,   remove   the   pairing  
and

  pair   the   telephone   again   with   the   desired   mode.
Enter
  a   minimum   4   figure   code   in   the   telephone  
and

  confirm.
Enter   the   same   code   in   the   system,  
select "

OK"   and   confirm.
Select   the   name   of   the   desired  
peripheral

  from   the   list   of   devices  
detected

  then   confirm.

06
254
USING THE TELEPHONE
Directory configuration / Synchronisation with the telephone
Press PHONE then select "Contacts
management"  and   confirm.
Select "New contact" to enter a new
contact.
Select "Delete all contacts"
  to   delete  
the

  contacts   saved   in   the   system. Select "Import all the entries"
  to   import  all
  the   contacts   in   the   telephone   and  save
  them   in   the   system.
Once
  imported,   a   contact   remains   visible  
whatever

  telephone   is   connected.
Select "Synchronization options ":
-
 
No
  synchronization:   only   the  
contacts

  saved   in   the   system  
(always

  present).
-
 
Display
  telephone   contacts:   only   the  
contacts

  saved   in   the   telephone.
-
 
Display
  SIM   card   contacts:   only   the  
contacts

  saved   on   the   SIM   card.
-
 
Display
  all   phone   contacts:  
contacts

  on   the   SIM   card   and   in   the  
telephone.
Select "

Contact mem. status" to see the
number
  of   contacts   saved   in   the   system  
or

  imported,   and   the   free   memory.
Select "Sort by Name/First name" or
"Sort by First name/Name" to choose
the
  order   in   which   they   appear.

06
255
Editing, importing or deleting a contact
Press PHONE then select "Directory of
contacts"  and   confirm.
Select "Search",
  then   turn   the   knob   to  
choose

  in   numerical   or   alphabetical   order  
a

  group   of   contacts   from   the   entries   made  
previously

,   then   confirm.
Go to the list of contacts, select the
desired
  contact   then   confirm.
Select "Import"
  to   copy   a   contact   from  
the

  telephone   to   the   system.
Select "Delete"
  to   delete   a   contact  
recorded

  in   the   system. Select OK
  or   press   the   back   button   to   exit  
this

  menu.
Once
  the   contact   has   been   imported,   the   Bluetooth   symbol  
disappears,

  replaced   by   the   telephone   symbol   which   shows   that   the  
contact

  has   been   saved   in   the   system.
USING THE TELEPHONE
It is not possible to modify or delete contacts in the telephone or the SIM  card   via   the   Bluetooth   connection.
Select "Open" to view a contact on the
telephone
 
or
 
modify
 
a
 
contact
 
saved
 
in
 
the

 
system. In the "Directory of contacts"
  menu,   the   import   and   deletion   of  
contacts

  is   done   one   by   one.

06
256
USING THE TELEPHONE
Press PHONE twice.
Select " Dial"   then   confirm. Select "Directory of contacts" then
confirm.
Dial
  the   telephone   number   using   the  
virtual

  keypad   selecting   each   number  
in

  turn.
Confirm
  "OK"   to   make   the   call. Press TEL or twice on PHONE.
Calling a new number
Calling a contact
Select   the   desired   contact   and   confirm.
If access was via the PHONE button,
select "Call"
  and   confirm.
Select
  the   number   and   confirm   to   start  
the

  call.
Making a callUse of the telephone is not recommended while driving. We recommended  that   you   park   safely   or   make   use   of   the   steering  
mounted

  controls.

06
257
USING THE TELEPHONE
Calling a recently entered numberPress TEL, select "Call list"   and  
confirm,
Select

  the   desired   number   and   confirm.
To
  erase   the   calls   log,   press  
PHONE
twice, select "Phone
functions"
  and   confirm   then   select   "Delete calls log"   and  
confirm.
Ending a call
Press PHONE then select "OK" to end the  call.
Or
  make   a   long   press   on   TEL at the
steering
  mounted   controls.
Or
  make   two   short   presses   on   TEL at
the
  steering   mounted   controls.
o

r press the MODE   button,   as   many  
times

  as   necessary,   until   the   telephone  
screen

  is   displayed.
Press PHONE
 
to
 
display
 
the
 
calls
 
log.
or
Press "OK"
  to   display   the   contextual  
menu

  then   select   "Hang up"   and  
confirm.
It

 
is
 
always
 
possible
 
to
 
start
 
a
 
call
 
directly
 
from
 
the
 
telephone;
 
park

 
the
 
vehicle
 
as
 
a
 
safety
 
measure.

06
258
USING THE TELEPHONE
Receiving a call
An incoming call is announced by a ring and a superimposed display on  the   screen.
"Ye s"
  to   accept   the   call   is   selected   by  
default.
Press "

OK"   to   accept   the   call.
Select "No"
  and   confirm   to   reject   the  
call.
a short press on

TEL accepts an
incoming
  call.
A
 

long   press   on  
TEL
  rejects   an   incoming  
call.