FORD MUSTANG 2003 Workshop Manual

FORD MUSTANG 2003 Workshop Manual MUSTANG 2003 FORD FORD https://www.carmanualsonline.info/img/11/56942/w960_56942-0.png FORD MUSTANG 2003 Workshop Manual
Trending: fuses, fuel tank removal, brake sensor, ECO mode, child lock, weight, fuel

Page 1971 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Fuel Charging Wiring Harness 
Removal and Installation 
 WARNING: Do not smoke or carry lighted tobacco or open flame of any type when 
working on or near any fuel related co

Page 1972 of 4378

FORD MUSTANG 2003  Workshop Manual 6. Remove the PCV valve. 
7. Disconnect and remove the PCV hose. 
8. Disconnect the camshaft position (CMP) sensor electrical connector. 
9. Disconnect the engine coolant temperature (ECT) sensor elec

Page 1973 of 4378

FORD MUSTANG 2003  Workshop Manual 10. Remove the fuel charging wiring harness bracket bolt. 
11. Disconnect the following: 
�zThe 42- pin engine bulkhead electrical connector. 
�z The 16- pin electrical connector. 
12. Separate the wi

Page 1974 of 4378

FORD MUSTANG 2003  Workshop Manual 14. Disconnect the throttle position (TP) and the idle air control (IAC) valve electrical connectors. 
15. Disconnect the accelerator cable, and if equipped, the speed control cable. 
16. Remove the n

Page 1975 of 4378

FORD MUSTANG 2003  Workshop Manual 19. Disconnect the transmission main control harness electrical connector. 
20. Raise and support the vehicle. For additional information, refer to 
Section 100 - 02  . 
21. Disconnect the RH heated o

Page 1976 of 4378

FORD MUSTANG 2003  Workshop Manual 24. Unclip the harness from the bracket. 
25. Lower the vehicle. 
26.
NOTE:  LH side shown, RH side similar. 
Disconnect the two radio ignition interference capacitor electrical connectors. 
27. Disco

Page 1977 of 4378

FORD MUSTANG 2003  Workshop Manual 28. Separate the harness from the fuel supply manifold studs in four places and remove the fuel 
charging wiring harness from the vehicle. 
29. To install, reverse the removal procedure.  Klj .  7

Page 1978 of 4378

FORD MUSTANG 2003  Workshop Manual REMOVAL AND INSTALLATION 
Fuel Injection Supply Manifold and Fuel Injector 
Removal and Installation 
 WARNING: Do not smoke or carry lighted tobacco or open flame of any type when 
working on or near

Page 1979 of 4378

FORD MUSTANG 2003  Workshop Manual 8. Disconnect the fuel pulse damper electrical connector and the vacuum hose. 
9.
NOTE:  RH shown, LH similar. 
Disconnect the eight fuel injector electrical connectors. 
10. Separate the fuel chargin

Page 1980 of 4378

FORD MUSTANG 2003  Workshop Manual 12. Remove the fuel supply manifold and fuel injectors as an assembly. 
13. Remove the anti-
rotation clips and the fuel injectors from the fuel supply manifold. 
14. NOTE:  Always install new O- ring
Trending: transmission oil, child lock, service interval, suspension, oil additives, auxiliary battery, check oil