display HONDA CIVIC COUPE 2015 9.G Navigation Manual
[x] Cancel search | Manufacturer: HONDA, Model Year: 2015, Model line: CIVIC COUPE, Model: HONDA CIVIC COUPE 2015 9.GPages: 253, PDF Size: 8.81 MB
Page 77 of 253

76
System Setup
Other Settings
HHOME uSetting su Sys tem uOther s
Set the map units to either miles or kilo meters, the system language, and various 
settings for the navigation system.
Select an item.
The following items are available:
• Units : Sets the map units to either miles  (factory default) or kilometers.
• Language : Sets the system language used on  all screens. You can choose from 
three languages.
• Keyboard Layout : Sets the type of keybo ard screen to either Alphabet or 
QWERTY  (factory default).
• Voice Command Tips : Alerts you when manual contro l of the system is disabled 
to prevent distraction while driving.  Only voice commands are available.
On  (factory default): Displays a message.
Off : Disables the message, but some options may be grayed out on the screen.
• Remember Last Screen : Sets whether to display the  last selected screen when 
you turn on the system.
On : Displays the last selected screen.
Off  (Factory Default):  Disable the feature.
• Factory Data Reset : Resets all the settings on the Settings screen to their factory 
defaults.
2 Data Reset  P. 78
1Other Settings
Units
The factory default is set to  km on Canadian models.
15 CIVIC NAVI-31TR38300.book  76 ページ  2014年8月7日 木曜日 午前11時49分 
Page 78 of 253

77
uuOther Settings uLanguage
System Setup
Language
H HOME uSetting su System uOther su Language
Set the system language used on all scre ens. You can choose from three languages: 
English,  Français (French),  Español (Spanish).
Select the system language.1Language
Voice confirmation of cities and streets only occurs 
when  English  is the system language.
When  Français  or Español  is selected, some 
messages continue to be  displayed in English.
15 CIVIC NAVI-31TR38300.book  77 ページ  2014年8月7日 木曜日 午前11時49分 
Page 80 of 253

79
Navigation
This section describes how to enter a destination, select a route to take, and follow the
route to your destination. It also describes how to change your route or destination along
the way.
Entering a Destination........................... 80
Address ................................................. 82
Address Book ......................................... 87
Place Name ............................................ 88
Place Phone Number .............................. 90
Place Category ....................................... 91
Previous Destination ............................... 93
Intersection ............................................ 94
Coordinate ............................................ 95
Map Input.............................................. 96 Calculating the Route
..............................98
Viewing the Routes .................................99
Driving to Your De stination.................100
Viewing the Route ................................100
Listening to Voice Guidance ..................104
Map Menu ..............................................105
Displaying the Map Menu .....................105
Directions .............................................107
Traffic Rerouting
TM................................109
Changing Your Route ............................111
Adding Waypoints ................................112
Editing the Destination List ....................116
Canceling the Route .............................118
Taking a Detour ....................................118 Avoiding Streets ................................... 119
Changing Your De stination................. 120
Find Nearest Place ................................ 120
Selecting a Destination on the Map ...... 121
Entering a New Destination .................. 122
Re suming Your Trip .............................. 123
15 CIVIC NAVI-31TR38300.book  79 ページ  2014年8月7日 木曜日 午前11時49分 
Page 81 of 253

80
Navigation
Entering a Destination
HHOME uNavi uMENU
This section describes how to enter a destination for route guidance. Select an item.
uSelect  More Search Methods  to 
display additional menu entries.
The following items are available:
• Address : Sets a destination by entering an address. 
2Address P. 82
•Address Book : Sets a destination by selecting an address stored in your Address 
Book. 
2 Address Book  P. 87
•Place Name : Sets a destination by entering a place name. 
2Place Name  P. 88
1Entering a Destination
 “Display Menu” (on the map screen)
If you select MENU  on the map screen when en 
route, the Route Option screen is displayed. 2 Changing Your Route P. 111
Prior to departure, you can  set areas along your route 
to avoid.
2 Avoiding Street s P. 119
Certain touchscree n functions are disabled while the 
vehicle is moving. 2 Limitations  for Manual Operation  P. 21
If you press and hold the MENU  button on the 
steering wheel on while the map screen, the 
following items are available. Use the steering wheel 
buttons to sele ct the items.
•Go Home
•Previous Destination•Change Route Pref.
•Address Book
•Cancel Route
15 CIVIC NAVI-31TR38300.book  80 ページ  2014年8月7日 木曜日 午前11時49分 
Page 83 of 253

82
uuEntering a Destination uAddress
Navigation
Addre ss
HHOME uNavi uMENU uAddre ss
Enter an address to use as the destination.  The state or province you are currently in 
is displayed (e.g ., CALIFORNIA).
Select an item.
The following items are available:
• City : Selects your destination city. 
2Selecting a City  P. 84
•Street : Selects your destination street. 
2Selecting a Street  P. 85
•Change State : Selects the state or province. 
2Selecting the State or Province  P. 83
1Address
On Canadian models,  Change Province is displayed 
as  Change State .
You can say the entire a ddress at once using voice 
commands. Say   “ Address” on the Voice Portal 
screen, then say the entire address. For example,   
“1-2-3-4 Main Street, Los Angeles, California. ” The 
system interprets the address. Say   “ Set as 
destination ” to begin the route.
The system language need s to be set in English.
U.S. models
15 CIVIC NAVI-31TR38300.book  82 ページ  2014年8月7日 木曜日 午前11時49分 
Page 85 of 253

uuEntering a Destination uAddress
84
Navigation
H HOME uNavi uMENU uAddre ssu City
The name of the city where you ar e currently located is displayed.
1.Enter the name of a different city, 
or select  OK for the current city.
2. Select your destination city from 
the list.
u A list of matching hits is 
automatically displayed after 
you enter several letters, with 
the closest match at the top of 
the list.
u Next, you are prompted to 
enter a street name.
2 Selecting a Street  P. 85
■Selecting a City1
Selecting a City
Vehicle position may not  be displayed when:
•The automobile is traveling off-road.
•The vehicle position data cannot be updated.
You do not need to enter spaces or symbols (e.g., &, 
-,%). Partial matches are  supported (e.g., “LOS” to 
find “LOS ANGELES”).
Using Voice Command (Engli sh only)
Say  “ City” on the Address screen, and the 
following screen is displayed.
Select  Current City for your current location, or say 
the name of different city. 2 Selecting a Street  P. 85
If your city is not listed, it may be part of a larger 
metropolitan area. Try entering the street first.
Non-detailed area mark: Try entering the 
street first and then select the city.
15 CIVIC NAVI-31TR38300.book  84 ページ  2014年8月7日 木曜日 午前11時49分 
Page 86 of 253

Continued85
uuEntering a Destination uAddress
Navigation
H HOME uNavi uMENU uAddre ssu Street
1. Enter the name of your destination 
street.
u Do not enter the street type 
(e.g., street, road, avenue) or 
direction (e.g., north, south, 
east, west).
u Select  OK to display a list of 
streets.
2. Select your destination street from 
the list.
u A list of matching hits is 
automatically displayed after 
you enter several letters, with 
the closest match at the top of 
the list.
■Selecting a Street1
Selecting a Street
When entering the names of major freeways, you can 
use the following abbreviati ons. For interstates, use 
an “I” (e.g., I-10). For U.S. freeways, use “US” (e.g., 
US-18). For state freeways, use the two-character 
state designation (e.g., CA-101). For county roads, 
use the appropriate desi gnation (e.g., G-2). For 
Trans-Canada and Provincial highways, use “Hwy” 
(HWY-7). For County roads, use “CR” (CR-32). For 
Regional Roads, use “RR” (RR-5).
Using Voice Command (Engli sh only)
Say  “ Street” on the Address screen, and the 
following screen is displayed:
•Say the name of your de stination street, and say 
the street number as a st ring of individual numbers.
•Set the route to your destination.
2 Calculating the Route  P. 98
15 CIVIC NAVI-31TR38300.book  85 ページ  2014年8月7日 木曜日 午前11時49分 
Page 87 of 253

uuEntering a Destination uAddress
86
Navigation
3. Enter the street number. Select 
OK .
u Only valid street numbers can 
be entered.
4. Set the route to your destination. 
2 Calculating the Route  P. 98
1Selecting a Street
If you did not select  a city first and there is more than 
one city with the specified street, a list of cities is 
displayed.
Select the desired city from the list.
If there is more than one address though you 
specified the street and the  city, select an address on 
the Select an address screen.
15 CIVIC NAVI-31TR38300.book  86 ページ  2014年8月7日 木曜日 午前11時49分 
Page 88 of 253

87
uuEntering a Destination uAddress Book
Navigation
Addre ss Book
HHOME uNavi uMENU uAddre ss Book
Select an address stored in your ad dress book to use as the destination.
1.Select the driver.
2. Select your destination from the 
list.
3. Set the route to your destination.
2 Calculating the Route  P. 98
uSelect   or   to display only 
the entries in a category:  ALL, 
BUSINESS , PERSONAL , or 
other categories you have 
created.
2 Selecting an Addre ss Book 
Category  P. 31
1Address Book
If you have PIN-protecte d your address book, enter 
your PIN number when prompted. Select  OK. PINs 
are optional. 2 PIN Number s P. 34
You can select  Add New Address on the Address 
book screen to add an entry to the address book. 2 Adding an Addre ss Book Entry P. 29
15 CIVIC NAVI-31TR38300.book  87 ページ  2014年8月7日 木曜日 午前11時49分 
Page 89 of 253

88
uuEntering a Destination uPlace Name
Navigation
Place Name
H HOME uNavi uMENU uPlace Name
Enter the name of a place (e.g., business, hotel, restaurant) stored in the map 
database to use as the destination. 1.Enter a place name.
2. Select  OK to display a list of 
matching hits.
3. Select a place name from the list.
u If the place name is in multiple 
categories, the categories are 
displayed when you select it. 
2 Place Name in Multiple 
Categories P. 89
4.Set the route to your destination.
2 Calculating the Route  P. 98
1Place Name
This option is convenient if  you know the exact name 
of a place.
Select  ÁÀÂ or Symbol  to enter accented letters or 
symbols, select Space  to enter a space character, or 
select   to remove the last character.
Once a name is entere d and selected, select Sort by 
Name or  Sort by Distance . Matching letters are in 
blue.
15 CIVIC NAVI-31TR38300.book  88 ページ  2014年8月7日 木曜日 午前11時49分