Hyundai Equus 2016 Digital Navigation System
Manufacturer: HYUNDAI, Model Year: 2016, Model line: Equus, Model: Hyundai Equus 2016Pages: 261, PDF Size: 7.39 MB
Page 191 of 261
5
Voice
Recognition
Using Voice Recognition
Voice Command List
5
) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E ) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E
Page 192 of 261
Using Voice Recognition
5-2
Using Voice Recognition
Creating a suitable cabin environment
"…When using the voice recognition feature, only commands listed within the user's manual are supported.
"…Be aware that during the operation of the voice recognition sys- tem, pressing some keys other than the
key will termi-
nate voice recognition mode.
"…For superior voice recognition performance, position the micro- phone used for voice recognition above the head of the driver
Page 193 of 261
Using Voice Recognition
Voice Command List l 5-3
Starting Voice Recognition
Starting Voice Recognition
Shortly press the key on the
steering remote controller (under 0.8
seconds) Ü Say a command.
Once voice recognition starts, the voice
command entry window and the possible
commands are displayed.
!Ÿ If voice recognition is in Normal Mode,
then the system will say “Please say a
command after the beep”
!Ÿ If voice recognition is in Expert Mode,
then the system will only sound a beep
tone.
i Information
!Ÿ To change the Normal/Expert setting,
refer to the INFO/Setup section.
Screen displayed when Voice Recognition
is Normal Mode
Screen displayed when Voice Recognition
is Expert Mode.
NOTICE
!Ÿ For proper recognition, say the command
after the voice instruction and beep tone.
) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E ) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E
Page 194 of 261
Using Voice Recognition
5-4
Skipping Prompt Messages
While prompt message is being stated
Ü Shortly press the
key on the
steering remote controller (under 0.8
seconds).
The prompt message is immediately
ended and the beep tone will sound. After
the “beep”, say the voice command.
Re-starting Voice Recognition
While system waits for a command Ü
Shortly press the
key on the
steering remote controller (under 0.8
seconds).
The command wait state is immediately
ended and the beep tone will sound. After
the “beep”, say the voice command.
Ending Voice Recognition
While Voice Recognition is operating
Ü Press and hold the
key on
the steering remote controller (over 0.8
seconds).
While using voice command, pressing a
different key on the steering wheel remote
control will end voice command.
i Information
!Ÿ In a state where the system is waiting for
a voice command, say “cancel” or “exit” to
end voice command.
!Ÿ In a state where the system is waiting for
a voice command, press and hold the
key on the steering remote con-
troller to end voice command.
Adjusting Voice Recognition
Volum e
While Voice Recognition is operating
Ü Tu r n
the volume knob left/right
to adjust the voice recognition prompt
volume.
) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E ) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E
Page 195 of 261
Using Voice Recognition
Voice Command List l 5-5
Illustration on Using Voice Recognition
Starting Voice Recognition
Shortly press the key (under 0.8
seconds).
Skipping Prompts
Shortly press the key (under 0.8
seconds).
Shortly press the
key (under 0.8
seconds).
Ending Voice Recognition
Shortly press the key (under 0.8
seconds).
Press and hold the key (over 0.8
seconds) Ü Ends Voice Recognition.
Help
(BEEP)(BEEP)
Please.....
While prompt message is being stated
Please say a command after the
beepPlease say a command after the
beep
Help.
Please say a command after the
beep
Help
(BEEP)
Help.
Please say a command after the
beep
) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E ) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E
Page 196 of 261
Voice Command List
5-6
Voice Command List
Voice commands within this system are categorized into “Common
Commands” and “Mode Commands”.
!Ÿ Common Commands ( ) : commands that can be used in all
situations.
!Ÿ Mode Commands ( ) : commands that can be used in specific
multimedia/navigation/Bluetooth
® mode states.
i Information
!Ÿ Some commands will operate properly only when a USB, iPod,
Bluetooth
® or other device has been connected.
Help Command List
Command Operation
HelpDisplays the main Help screen.
Destination
HelpDisplays the Destination related command list.
Map Help Displays the Map related command list.
Radio Help Displays the FM/AM radio related command list.
XM Help Displays the XM radio related command list.
Disc HelpDisplays the DISC mode related command list for the
disc inserted in the CD Player.
iPod Help Displays the iPod related command list.
USB Help Displays the USB related command list.
Jukebox Help Displays the Jukebox related command list.
Phone Help Displays the Phone related command list.
) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E ) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E
Page 197 of 261
Voice Command List
Voice Command List l 5-7
Audio System Command List
FM/AM Radio
CommandOperation
RadioPlays the most recent frequency for the most
recently operated band.
AMPlays the most recent frequency for the
corresponding band.
FMPlays the most recent frequency for the corresponding
band. In the case of FM, the most recent frequency within
the most recently played FM1 or FM2 band is Played.
FM1/FM2
Plays the most recent frequency for the
corresponding band.
AM
<530~1710>Plays the desired AM band frequency.
(ex : AM “Five-Hundred Thirty”)
FM
<87.5~107.9>Plays the desired FM band frequency.
(ex : FM “Eighty-Seven point Five”)
Scan
Scans receivable frequencies from the current
broadcast and plays for 5 seconds each.
Preset ScanMoves to the next preset from the current present
and plays for 5 seconds each.
XM Radio
Command
Operation
XMPlays the last channel within the last band from XM.
XM Channel
<0~999>Plays the desired XM band channel.
(ex :
XM channel “Eleven”)
Channel
<0~999> Plays the desired channel of the current band.
Scan Scans receivable channels from the current
broadcast and pla
ys f
or 5 seconds each.
Preset Scan Moves to the next preset from the current present
and plays for 5 seconds each.
) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E ) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E
Page 198 of 261
Voice Command List
5-8
CD (Audio Type)
CommandOperation
CDPlays disc media currently inserted in the disc player.
Play Plays the currently paused song.
PausePauses the current song.
Repeat Repeats the current track.
Repeat OffCancels repeat play to play tracks in sequential
order.
Shuf
e Randomly plays the tracks within the CD.
Shuf e Off Cancels random Play to play tracks in sequential
order.
Track <1~99> Plays the desired track number.
CD (MP3 Type)
Command
Operation
CDPlays disc media currently inserted in the disc player.
Play Plays the currently paused song.
PausePauses the current song.
Next Folder Plays the rst le in the next folder.
Previous Folder Plays the rst le in the previous folder.
Repeat Repeats the current le
Repeat Off Cancels repeat play to play les in sequential order.
Shuf e Plays all les within the CD in r andom order.
Shuf e Off Cancels random play to play les in sequential order.
) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E ) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E
Page 199 of 261
Voice Command List
Voice Command List l 5-9
DVD
CommandOperation
DVDPlays disc media currently inserted in the disc player.
PlayPlays the currently paused DV D movie.
PausePauses the current DV D movie.
Chapter <1~99>Plays the desired chapter number.
VCD (Video CD)
Command Operation
VCDPlays disc media currently inserted in the disc player.
Play Plays the currently paused VCD movie.
PausePauses the current VCD movie.
Repeat Repeats the current track.
Repeat OffCancels repeat play to play tracks in sequential order.
Track <1~99> Plays the desired track number.
USB Audio
Command Operation
USBIf the USB has been connected to the device, plays
the MP3
les within the USB
.
PlayPlays the currently paused le.
PausePauses the current le.
Next Folder Plays the rst le in the next folder.
Previous Folder Plays the rst le in the previous folder.
Repeat Repeats the current le.
Repeat Off Cancels repeat play to play les in sequential order.
Shuf e Plays all les within the USB in random order.
Shuf e Off Cancels random play to play les in sequential order.
) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E ) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E
Page 200 of 261
Voice Command List
5-10
iPod
CommandOperation
iPodPlays the songs within the iPod if the iPod has been
connected to the device.
Play
Plays the currently paused song.
PausePauses the current song.
Next Song Plays the next song.
Previous Song Plays the previous song.
Repeat On Repeats the current le.
Repeat Off Cancels repeat play to play les in sequential order.
Shuf e On Plays all les within the current category in random
order.
Shuf
e Off Cancels random play to play les in sequential order.
Others
CommandOperation
Audio On Turns on the Audio/Video.
Audio Off Turns off the Audio/Video.
Bluetooth Audio Plays Bluetooth Audio.
Auxiliary Plays the connected auxiliary device.
Blue Link Displays the Blue Link mode screen.
) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E ) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E