INFINITI M 2010 Owners Manual

HOW TO USE DISP BUTTON (models
without navigation system)
Push theDISPbutton to show the display
setting screen. (See ªDisplay settingsº later in
this section.)
HOW TO USE TRIP BUTTON (models
without navigation system)
Push the TRIPbutton to show the trip computer
display. (See ªTrip Computer informationº later
in this section.)
HOW TO USE FUEL ECON BUTTON
(models without navigation system)
Push the FUEL ECON button to show the fuel
economy information. (See ªFuel Economy infor-
mationº later in this section.)
HOW TO USE INFO BUTTON
The display screen shows vehicle and naviga-
tion (if so equipped) information for your con-
venience.
The information shown on the screen should be
a guide to determine the condition of the ve-
hicle. See the following for details.
Vehicle information display
1. Push the INFObutton on the control panel.
2. Choose an item using the INFINITI control- ler and push the ENTERbutton.
3. After viewing or adjusting the information on the following screens, push the BACK
button to return to the INFORMATION
menu.
See the separate Navigation System Owner's
Manual for the following items:
c Traffic Info.
c Where am I?
c GPS Satellite Info.
With navigation system
SAA1803
Without navigation system
SAA1805
4-8Monitor, climate, audio, phone and voice recognition systems
wÐ
Ð
05/14/09Ðpattie
X

Fuel Economy information
The distance to empty, average fuel economy
and current fuel economy (shown on the right
side bar) will be displayed for reference.
To reset the Average Fuel Economy, use the
INFINITI controller to highlight the ªResetº key
and push the ENTERbutton.
If the ª Viewº key is highlighted with the
INFINITI controller and the ENTERbutton is
pushed, the average fuel consumption history
will be displayed in graph form along with the
average for the previous Reset-to-Reset period.
The unit can be converted between ªUSº and
ªMetricº. (See ªHOW TO USE SETTING BUTTONº
later in this section.)
For models without the navigation system, the
information can be displayed by pushing the
FUEL ECON button on the control panel.
Tire Pressure information
The tire pressure will be displayed for refer-
ence.
The pressure indication ª** psiº on the screen
means that the tire pressure is being measured.
After a few driving trips, the pressure for each
tire will be displayed.
In case of low tire pressure, LOW PRESSURE
information will be displayed on the screen.
Check the pressure for all tires.
Tire pressure rises and falls depending on the
heat caused by the vehicle's traveling condition
and the temperature.
SAA1546
SAA1547
SAA1450
Monitor, climate, audio, phone and voice recognition systems4-9
wÐ
Ð
05/14/09Ðpattie
X

After tire rotation is performed, tire pressure
will not be displayed in the actual tire position.
Drive the vehicle at over 25 MPH (40 km/h) for
approximately 10 minutes to reset the display.
For more details about the Tire Pressure Moni-
toring System (TPMS), see ªTIRE PRESSURE
MONITORING SYSTEM (TPMS)º in the ª5. Start-
ing and drivingº section.
WARNING
cWhen a spare tire is mounted or a wheel is
replaced, tire pressure will not be indicated,
the TPMS will not function and the low tire
pressure warning light will flash for approxi-
mately 1 minute. The light will remain on
after 1 minute. Contact your INFINITI retailer
as soon as possible for tire replacement
and/or system resetting.
c Replacing tires with those not originally
specified by INFINITI could affect the proper
operation of the TPMS.
Trip Computer information
Elapsed Time, Driving Distance and Average
Speed will be displayed.
To reset each set of trip computer information,
use the INFINITI controller to highlight the ª Re-
set º key and push the ENTERbutton.
The unit can be converted between ªUSº and
ªMetricº. (See ªHOW TO USE SETTING BUTTONº
later in this section.)
With navigation system
SAA1806
Without navigation system
SAA1305
4-10Monitor, climate, audio, phone and voice recognition systems
wÐ
Ð
05/14/09Ðpattie
X

Maintenance information
The maintenance intervals can be displayed for
your desired maintenance items.
To set the maintenance interval for Reminders 1
to 4, choose an item using the INFINITI control-
ler and push theENTERbutton.
You can also set to display a message to remind
you that the maintenance needs to be per-
formed.
The following example shows how to set Re-
minder 1. Use the same steps to set the other
maintenance information.
1. Reset the driving distance to the new maintenance schedule.
2. Set the interval (mileage) of the mainte- nance schedule. To determine the recom-
mended maintenance interval, refer to
your ªINFINITI Service and Maintenance
Guideº.
3. To display the reminder automatically when the set trip distance is reached,
highlight the ª Interval Reminder º key
with the INFINITI controller and push the
ENTER button.
4. To return the display to MAINTENANCE INFO., push the BACKbutton.
With navigation system
SAA1554
Without navigation system
SAA1807
With navigation system
SAA1555
Monitor, climate, audio, phone and voice recognition systems4-11
wÐ
Ð
05/14/09Ðpattie
X

Maintenance information display cannot be op-
erated when the vehicle is moving. Stop the
vehicle in a safe place to see the information.
The unit can be converted between ªUSº and
ªMetricº. (See ªHOW TO USE SETTING BUTTONº
later in this section.)The Reminder will be automatically displayed as
shown when both of the following conditions
are met:
cthe vehicle is driven the set distance and the
ignition switch is pushed to the LOCK posi-
tion.
c the ignition switch is pushed to the ACC or
ON position the next time you drive the
vehicle after the set value has been reached.
To return to the previous display after the
maintenance reminder screen is displayed,
push the BACKbutton. The maintenance reminder screen is displayed
each time the ignition switch is pushed to the
ON position unless one of the following opera-
tions is performed:
c
ªReset Distanceº is selected.
c ªInterval Reminderº is set to OFF.
c the maintenance interval is set again.
SAA1611
4-12Monitor, climate, audio, phone and voice recognition systems
wÐ
Ð
05/14/09Ðpattie
X

Others information (models with
navigation system)
Select theªOthersºkey and push the ENTER
button to show ªVoice Recognitionº and ªNavi-
gation Versionº.
Voice Recognition information
(models with navigation system)
When you use the INFINITI Voice Recognition
system for the first time or if you do not know
how to operate it, you can display the voice
command list or user guide for confirmation.
(See ªINFINITI VOICE RECOGNITION SYSTEM
(models with navigation system)º later in this
section for the details.)
Command List :
Displays a list of voice commands that the
system can recognize. User Guide :
Displays a simplified operation manual of the
voice recognition system and how to use the
voice commands.
Navigation Version information
(models with navigation system)
The version of the navigation system will be
displayed.
SAA1808SAA1592
Monitor, climate, audio, phone and voice recognition systems4-13
wÐ
Ð
05/14/09Ðpattie
X

WARNING DISPLAY
The warning display will appear when one of the
following conditions occurs while driving at a
speed over 3 MPH (5 km/h).
cAny door is not securely closed. (The corre-
sponding door will be indicated on the dis-
play.)
c The trunk lid is not securely closed.
The warning display will turn off when the
vehicle speed slows down under 3 MPH (5
km/h) even if a door or trunk lid is not securely
closed yet.
Make sure to stop the vehicle and close a door
or trunk lid securely.
SAA1187
SAA1188
With navigation system
SAA1804
Without navigation system
SAA1514
4-14Monitor, climate, audio, phone and voice recognition systems
wÐ
Ð
05/14/09Ðpattie
X

HOW TO USE SETTING BUTTON
The display for vehicle settings will appear
when theSETTINGbutton on the control panel
is pushed.
For navigation settings, refer to the separate
Navigation System Owner's Manual.
For the ªComfort and Conv.º settings, the igni-
tion switch must be in the ON position.
Audio settings
The following display will appear when pushing
the SETTING button, selecting the ª Audioº key
with the INFINITI controller and pushing the
ENTER button.
Bass/Treble/Balance/Fade :
To adjust the speaker tone quality and sound
balance, select the ª Bassº, ªTreble º, ªBalance
ºorª Fadeº key and adjust it with the INFINITI
controller.
These items can also be adjusted by pushing
and turning the AUDIO knob.
BOSET CenterpointT (if so equipped) :
When this item is turned to ON, an exciting
surround sound is generated from a traditional
stereo recording.
BOSET AudioPilotT (if so equipped) :
When this item is turned to ON, AudioPilot T
monitors noise in the passenger compartment
with a microphone and compensates for any
unpleasant noise.
Surround Volume (if so equipped) :
To adjust the surround sound volume, select
ªSurround Vol.º and adjust it with the INFINITI
controller.
With navigation system
SAA1809
Without navigation system
SAA1810
Monitor, climate, audio, phone and voice recognition systems4-15
wÐ
Ð
05/19/09Ðtbrooks
X

Precision Phased Audio (if so equipped) :
When this item is turned to ON, super high pitch
sound and super low pitch sound are empha-
sized and midrange sound is played naturally.
Speed Sensitive Vol. (if so equipped) :
Sound volume is increased according to the
vehicle speed. Choose the effect level from OFF
(0) to 5.
Display settings
The following display will appear when pushing
theSETTING button, selecting ªDisplay º key
with the INFINITI controller and pushing the
ENTER button.
For models without the navigation system, the
setting screen can be displayed by pushing the
DISP button on the control panel.
Display :
To turn off the screen, push the ENTERbutton
and turn the ªDisplayº indicator off. The other
method is to push and hold the ª
OFF º
button for more than 2 seconds. When any mode button is pushed with the
screen off, the screen turns on for further
operation. The screen will turn off automatically
5 seconds after the operation is finished.
To turn on the screen, set this item to the ON
position, or push the ª
OFF
º button.
Brightness/Contrast/Background Color :
To adjust the brightness and contrast of the
screen, select the ª BrightnessºorªContrast º
key and push the ENTERbutton.
Then, you can adjust the brightness to ªDarkerº
or ªBrighterº, and the contrast to ªLowerº or
ªHigherº using the INFINITI controller.
For information on the ª Background Colorº key,
refer to the separate Navigation System Own-
er's Manual.
Navigation settings (models with
navigation system)
For the details of ªNavigationº settings, refer to
the separate Navigation System Owner's
Manual.
With navigation system
SAA1813
4-16Monitor, climate, audio, phone and voice recognition systems
wÐ
Ð
05/14/09Ðpattie
X

Rear Display settings (if so equipped)
The following display will appear when pushing
theSETTING button, selecting the ªRear Dis-
playº key with the INFINITI controller and push-
ing the ENTERbutton.
Rear Display :
To open the rear display, push the ENTER
button. The rear display is flipped down auto-
matically. To close the rear display, push the
ENTER button and turn the ªOKº indicator off.
The rear display will be closed automatically
when the ignition switch is pushed to the LOCK
position. The rear display can be also opened or closed
using the remote controller. (See ªINFINITI MO-
BILE ENTERTAINMENT SYSTEM (MES)º later in
this section.)
Volume and Beeps settings (models
with navigation system)
The following display will appear when pushing
the
SETTING button, selecting the ª Volume and
Beeps º key with the INFINITI controller and
pushing the ENTERbutton.
Guidance Vol. :
To adjust the guidance voice volume louder or
softer, select the ªGuidance Volumeº and ad-
just it with the INFINITI controller.
You can also adjust the guidance voice volume
by turning the VOLUME control knob while voice
guidance is being announced.
SAA2146SAA1561
Monitor, climate, audio, phone and voice recognition systems4-17
wÐ
Ð
05/14/09Ðpattie
X