wheel alignment ISUZU TF SERIES 2004 Workshop Manual

ISUZU TF SERIES 2004 Workshop Manual TF SERIES 2004 ISUZU ISUZU https://www.carmanualsonline.info/img/61/57180/w960_57180-0.png ISUZU TF SERIES 2004 Workshop Manual

Page 252 of 4264

ISUZU TF SERIES 2004  Workshop Manual 4C1-32  FRONT WHEEL DRIVE 
  
 
 5. Cross Pin 
(1) Be sure to install the cross pin so that it is in alignment with 
the lock pin hole in the differential cage. 
 
  
 (2) 
Adjust the backlash between

Page 276 of 4264

ISUZU TF SERIES 2004  Workshop Manual 4C1-56  FRONT WHEEL DRIVE 
  
 
Preload Adjustment 
Tighten the hub nut at 29.4 Nm (3 kgfm / 21.716 lb.ft), then 
loosen the nut to the full. 
Tighten the hub nut at the value given below, using a s

Page 285 of 4264

ISUZU TF SERIES 2004  Workshop Manual FRONT WHEEL DRIVE  4C1-65 
  
 
Preload Adjustment 
Tighten the hub nut at 29.4 Nm (3 kgfm / 21.716 lb.ft), then 
loosen the nut to the full. 
Tighten the hub nut at the value given below, using a s

Page 288 of 4264

ISUZU TF SERIES 2004  Workshop Manual 4C1-68  FRONT WHEEL DRIVE 
4
 
2 Model 
1.  WANDERS AND PULLS 
 
Checkpoint  Trouble Cause  Countermeasure 
 
 
Adjust the wheel bearing 
preload 
  
Too tight 
  NG   
 
Adjust the front alignmen

Page 289 of 4264

ISUZU TF SERIES 2004  Workshop Manual FRONT WHEEL DRIVE  4C1-69 
2.  FRONT WHEEL SHIMMY 
 
Checkpoint  Trouble Cause  Countermeasure 
 
 
 
Ball joint or bush 
  
Replace the ball joint or bush 
  
Worn 
 
 
Front alignment 
  
Adjust the

Page 292 of 4264

ISUZU TF SERIES 2004  Workshop Manual 4C1-72  FRONT WHEEL DRIVE 
5.  WANDERS AND PULLS 
 
Checkpoint  Trouble Cause  Countermeasure 
 
 
Adjust the wheel bearing 
preload 
  
Too tight 
  NG   
 
Adjust the front alignment 
  
Front align

Page 293 of 4264

ISUZU TF SERIES 2004  Workshop Manual FRONT WHEEL DRIVE  4C1-73 
6.  FRONT WHEEL SHIMMY 
 
Checkpoint  Trouble Cause  Countermeasure 
 
 
 
Ball joint or bush 
  
Replace the ball joint or bush 
  
Worn 
 
 
Front alignment 
  
Adjust the

Page 1873 of 4264

ISUZU TF SERIES 2004  Workshop Manual ENGINE MECHANICAL (6VE1 3.5L)  6A-49  
Engine Assembly 
Removal 
 
P1010068
1. Disconnect battery ground and positive cable.  
2.   Remove battery.  
3.   Make alignment mark on the engine hood and 
h

Page 2991 of 4264

ISUZU TF SERIES 2004  Workshop Manual MAINTENANCE AND LUBRICATION  0B-3 
SERVICE INTERVAL:  1,000 km  5  10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100(Use odometer reading  
 1,000 miles  3  6  9  12 15 18 21 24 27 30 33 36

Page 2994 of 4264

ISUZU TF SERIES 2004  Workshop Manual 0B-6  MAINTENANCE AND LUBRICATION 


I : Inspect and correct or replace as necessary     A : Adjust 
R : Replace or change     T : Tighten to specified torque    L : Lubricate 
 SERVICE INTERVAL:  
Page:   1-10 11-20 21-30 next >