tow Lancia Delta 2010 Owner handbook (in English)

178IN AN EMERGENCY
❍an information booklet (see fig. 3), providing instruc-
tions for using the kit correctly. This booklet should be
given to the personnel charged with handling the tyre
treated with this kit;
❍a compressor D-fig. 2 including a pressure gauge and
connections, found in the compartment;
❍a pair of protective gloves located in the side com-
partment of the compressor;
❍adapters for inflating different elements.
The quick repair kit also contains a screwdriver and a tow
ring.
Should any tyre get punctured due to foreign
bodies, you can repair it if the damage does-
n’t exceed 4 mm on the tread and on the
shoulder of the tyre.
Give the instruction booklet to the tyre repair
workshop personnel charged with handling
the treated tyre.
fig. 3L0E0076m
175-214 Delta 4ed gb 24-02-2010 14:36 Pagina 178

186IN AN EMERGENCY
Vehicle handling is modified with the small
spare wheel fitted. Avoid violent acceleration
and braking, sharp steering and fast bend-
ing. The overall duration of the small spare wheel
is of about 3000 km, after which the relevant tyre
must be replaced with another one of the same type.
Never install a traditional tyre on a rim designed to
be used as a small spare wheel. Repair and refit the
standard wheel as soon as possible. Using two or
more small spare wheels at the same time is for-
bidden. Do not apply grease to the bolt threads be-
fore assembly: they might come unscrewed.The jack may only be used to replace wheels
on the car which it equips or other cars of the
same model. Never use the jack for other pur-
poses, such as lifting other car models. Never use
the jack to carry out repairs under the car. Incor-
rect positioning of the jack may cause the car to fall.
Do not use the jack for loads higher than those
shown on the label. Never install snow chains on the
small spare wheel; if a front tyre (driving wheel)
is punctured and you need to use snow chains, use
a standard wheel from the rear axle and install the
small spare wheel on the rear axle. This way, with
two normal front driving wheels, you can install the
snow chains on them, thus resolving the emergency.
If the hub cap is not installed properly, it can
detach itself when the vehicle is running. Nev-
er tamper with the inflation valve. Never in-
troduce tools of any kind between rim and tyre.
Check tyre and small spare wheel pressure regu-
larly referring to the values shown in chapter “6”.
Tool box (versions with Bose Hi-Fi)
There is a tool box located in the luggage compartment
for versions with Bose Hi-Fi.
This box contains:
❍screwdriver;
❍tow hook;
❍wheel bolt spanner;
❍wheel bolt access spanner;
❍alloy wheel centering;
❍jack.
175-214 Delta 4ed gb 24-02-2010 14:36 Pagina 186

192IN AN EMERGENCY
After tyre replacement
❍stow the small spare wheel D-fig. 10 in the space pro-
vided in the luggage compartment;
❍fit the partially-opened jack in its box, forcing it light-
ly to prevent it from vibrating when travelling;
❍put the tools back into place in the container;
❍stow the container, complete with tools, into the spare
wheel and tighten the locking device B-fig. 10;
❍put back the luggage compartment mat into the prop-
er position.
IMPORTANT Do not use an inner tube with tubeless tyres.
Periodically check the inflation pressure of the tyres and
small spare wheel.CHANGING A BULB
GENERAL INSTRUCTIONS
❍Before changing a bulb check the contacts for oxida-
tion;
❍blown bulbs must be replaced with others of the same
type and power;
❍after replacing a headlight bulb, always check its align-
ment for safety reasons;
❍when a bulb is not working, check that the corre-
sponding fuse is intact before replacing it: refer to the
“Replacing fuses” paragraph in this chapter for fuse
location.
Modifications or repairs to the electrical sys-
tem that are not carried out properly or do
not take the system’s technical specifications
into account can cause malfunctions leading to the
risk of fire. If you choose to install wheels of a different
type (with alloy rims instead of the steel ones
or vice versa) you must change all the re-
taining bolts with others of a suitable size and use
a specific small spare wheel, with different speci-
fications. It is advisable to keep the replaced bolts
and small spare wheel, as they are necessary if in
future you decide to reinstall the original wheels.
175-214 Delta 4ed gb 24-02-2010 14:36 Pagina 192

IN AN EMERGENCY193
4
Halogen bulbs contain gas under pressure, if
they break, glass fragments may be dis-
persed.IMPORTANT A slight misting may appear on the inter-
nal surface of the headlight: this does not indicate a fault
and is caused by low temperature and the degree of hu-
midity in the air. Misting will rapidly disappear when the
headlights are switched on. The presence of drops inside
the headlights indicates water penetration. Contact a Lan-
cia Dealership.
IMPORTANT When the weather is cold or damp or after
hard rain or after washing, the area of headlamps or rear
lights, may steam up and/or form drops of condensation
on the inside. This is a natural phenomenon due to the dif-
ference in temperature and humidity between the inside
and the outside of the glass which does not indicate a fault
and does not compromise the normal operation of light-
ing devices. The mist disappears quickly turning the lights
on, starting from the centre of the diffuser, extending pro-
gressively towards the edges.
When handling halogen bulbs, only touch the
metal part. Touching the transparent part of
the bulb with your fingers may reduce the in-
tensity of the emitted light and even compromise the
life of the lamp. In the event of accidental contact,
wipe the bulb with a cloth moistened with alcohol
and leave it to dry.
Where possible, it is advisable to have bulbs
changed at a Lancia Dealership. The correct
operation and orientation of the external
lights is essential for safe driving. You may be li-
able to fines if this is not the case.
175-214 Delta 4ed gb 24-02-2010 14:36 Pagina 193

214IN AN EMERGENCY
TOWING THE CAR
The tow ring provided with the car is housed in the tool
box under the luggage compartment mat.
FASTENING THE TOW RING fig. 43-44
Proceed as follows:
❍release cap A;
❍take the tow hook B from its seat in the tool support;
❍tighten the ring on the rear or front threaded pin.
fig. 43L0E0090mfig. 44L0E0091m
Before starting towing operations, turn the ig-
nition key to MAR and then to STOP, without
extracting it. If the key is extracted, the steer-
ing wheel lock will be automatically activated, thus
preventing steering. The power brakes and the elec-
trical power steering will not work while the car is be-
ing towed. More effort on the brake pedal and steer-
ing wheel will therefore be required. Do not use wires
for towing. Do not jerk. Make sure not to damage parts
in contact with the car while towing. Respect the spe-
cific rules of the Highway Code when towing the car
specifically in relation to the towing device and the be-
haviour to maintain on the road. Do not start the en-
gine while towing the car.
175-214 Delta 4ed gb 24-02-2010 14:36 Pagina 214

216CARE AND MAINTENANCE
SCHEDULED SERVICING
Correct maintenance is essential for ensuring long car life
under the best conditions.
Lancia has prepared a series of checks and service oper-
ations to be carried out every 30,000 kilometres (for petrol
versions) or every 35,000 kilometres (for diesel versions).
Scheduled servicing will not however fully cover all of the
needs of your car: also in the initial period before the
30,000/35,000 km service and later, between one ser-
vice and another, ordinary care is still required such as
routine checks, topping up the fluid levels,checking tyre
pressure, etc.
IMPORTANT Scheduled Services are required by the man-
ufacturer. Failure to carry them out may invalidate the
warranty.Scheduled Services are offered by all Lancia Dealerships
according to a set time schedule.
If during each operation, in addition to the scheduled ones,
the need arises for further replacements or repairs, these
may be carried out only with the explicit agreement of the
Customer.
IMPORTANT You are advised to contact a Lancia Deal-
ership in the event of any minor operating faults, with-
out waiting for the next service.
If your car is used frequently for towing, the interval be-
tween one service and the next should be reduced.
215-242 Delta 3ed gb 11-11-2009 12:14 Pagina 216

35 70 105 140 175
●● ● ● ●
●
●
●●
●●
●● ● ● ●
●●
●● ● ● ●
220CARE AND MAINTENANCE
Thousands of kilometres
Check engine management system operation (via diagnostic socket)
Replace auxiliary drive belt
Replace toothed timing drive belt (*)
Replace fuel filter
Replace air filter cartridge
Change engine oil and oil filter (versions without DPF) (or every 24 months)
Change engine oil and oil filter (versions with DPF) (**)
Change brake fluid (or every 24 months)
Change pollen filter (or every 15 months)
(*) Regardless of the km covered, the timing belt should be replaced every 4 years for particularly demanding use (cold climates,
driving in the city, idling for a long time) or in any case every 5 years.
(**) The engine oil and the filter must be changed when the instrument panel warning light comes on (see “Warning lights and
Messages” chapter) and in all cases every 2 years.
If the car is used mainly in towns the engine oil and filter need to be changed every 12 months.
215-242 Delta 3ed gb 11-11-2009 12:14 Pagina 220

CARE AND MAINTENANCE221
5
REGULAR INSPECTIONS
Every 1,000 km or before long journeys, check and top
up if required:
❍engine coolant fluid level;
❍brake fluid level;
❍windscreen washer fluid level;
❍tyre pressure and condition;
❍operation of lights (headlights, direction indicators,
hazard lights, etc.);
❍operation of the windscreen wiper/washer system, po-
sition and wear of windscreen/rearscreen wiper blades.
Every 3,000 km check the following and top-up, if re-
quired: engine oil level.
You are recommended to use PETRONAS LUBRICANTS
products, designed and produced specifically for Lancia
cars (see table “Capacities” in chapter “6”).
DEMANDING USE OF THE CAR
If you use the vehicle mainly under one of the following
especially heavy conditions:
❍trailer or caravan towing;
❍dusty roads;
❍repetitive short distances (less than 7-8 km) with ex-
ternal temperatures below zero;
❍frequently idling the engine or long distances at low
speed driving (e.g. door-to-door deliveries) or long term
inactivity;
❍urban routes.
215-242 Delta 3ed gb 11-11-2009 12:14 Pagina 221

1410
570
1077
903
1980
1300
80
601320
570
1002
888
1890
1300
80
60
258TECHNICAL DATA
WEIGHTS
Weights (kg) 1.4 Turbo Jet 1.6 Multijet
Unladen weight (with all fluids, fuel tank filled to
90% and without optional equipment)
Carrying capacity (*) including the driver:
Maximum permitted loads (**)
– front axle:
– rear axle:
– total:
Towable loads
Maximum load on roof
Maximum load on tow hitch
(trailer with brakes):
(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified carrying
capacity.
(**) Loads must not be exceeded. The driver is responsible for arranging the loads in the boot and/or on the roof so that they com-
ply with these limits.
243-266 Delta 3ed gb 11-11-2009 12:16 Pagina 258

TECHNICAL DATA259
6
1430
570
1097
903
2000
1300
80
601430
570
1097
903
2000
1300
80
60
Weights (kg) 1.9 Twin Turbo Multijet 2.0 Multijet
Unladen weight (with all fluids, fuel tank filled to
90% and without optional equipment)
Carrying capacity (*) including the driver:
Maximum permitted loads (**)
– front axle:
– rear axle:
– total:
Towable loads
Maximum load on roof
Maximum load on tow hitch
(trailer with brakes):
(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified carrying
capacity.
(**) Loads must not be exceeded. The driver is responsible for arranging the loads in the boot and/or on the roof so that they com-
ply with these limits.
243-266 Delta 3ed gb 11-11-2009 12:16 Pagina 259