Lancia Musa 2007 Owner handbook (in English)

80
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
DOOR MIRRORS
Electric adjustment is only possible with ignition key at MAR.
Proceed as follows:
❒use switch B to select the mirror required (left or right);
❒to adjust the mirror move the switch C in the four directions.
Adjust mirrors with car stationary and handbrake on.
Mirror defrosting starts automatically when switching the heated rear
window on.
Folding
When required (for example when the mirror causes difficulty in
narrow spaces) it is possible to fold mirrors moving them from
position 1 to position 2.
When driving the mirrors shall always be in position 1.
As the driver’s door mirror is curved, it may slightly alter the perception of distance.
L0D0058m
L0D0059m

81
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
HEATING/CLIMATE CONTROL SYSTEM
1 Fixed vents for defrosting/demisting side windows - 2 Side adjustable outlets - 3 Fixed vents for
defrosting/demisting windscreen - 4 Centre adjustable outlets - 5 Lower vents - 6 Lower vents for rear
passengers.
L0D0060m

82
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CENTRAL AND SIDE VENTS
A Fixed vents for defrosting/demisting side windows
B Control for outlet opening/closing
C Control for directing outlet and air flow.
L0D0061m
L0D0062m

83
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
MANUAL CLIMATE CONTROL SYSTEM (where provided)
AIR DISTRIBUTION
Using knob E it is possible to choose
manually 5 of the possible air distributions
to the passenger compartment:
«air flow from central vents and side
outlets 2 and 4;
Δair flow from centre and side vents 2 and
4 and downwards 5 and 6 (bilevel
function);
≈air flow downwards 5 and 6;
ƒair flow downwards 5 and 6 and also to
the windscreen 3;
-to demist and defrost windscreen 3 and
front side windows 1.
CONTROLS
A fan activation and speed control knob
B air temperature knob (mixing hot and cold air)
C heated rear window on/off button
D climate control compressor on/off button;
E air distribution selection knob
F air recirculation on/off button.
L0D0064m

TEMPERATURE ADJUSTMENT
Proceed as follows:
Turn knob B clockwise (pointer to red sector) to
increase temperature or turn it counter-clockwise to
decrease temperature;FAN SPEED ADJUSTMENT
Proceed as follows:
❒open completely central (4) and side (2) vents;
❒turn knob B to the blue sector;
❒set A to the required speed;
❒set knob E to «;
❒set knob F toÚto turn air recirculation off.
84
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS

RECIRCULATION
Set knob E to ….
This function is particularly useful when the outside
air is heavily polluted (in a traffic jam, tunnel, etc.).
However, it is better not to use it for long periods,
especially if there are several people in the car to
prevent window steaming up.
IMPORTANT The inside air recirculation system
makes it possible to reach the required “heating” or
“cooling” conditions faster. Do not use the air
recirculation function on rainy/cold days as it would
considerably increase the possibility of the windows
misting inside.
85
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
QUICK HEATING
Proceed as follows:
❒close all dashboard vents;
❒turn knob B to the red sector;
❒turn knob A to 4 -;
❒turn knob E to ≈.

86
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
QUICK WINDSCREEN AND FRONT SIDE
WINDOW DEMISTING/DEFROSTING
Proceed as follows:
❒turn knob B to the red sector;
❒turn knob A to 4 -;
❒turn knob E to -;
❒set knob F to Uto turn air recirculation off.
After demisting/defrosting, operate the controls to
restore the required comfort.
Preventive demisting procedure
In the event of considerable outside moisture and/or
rain and/or considerable differences in temperature
inside and outside the passenger compartment,
perform the following preventive demisting
procedure:
❒set knob F to Uto turn air recirculation off;
❒turn knob B to the red sector;
❒turn knob A to 2;
❒turn knob E to to -or to ƒif the windows do
not mist up.
IMPORTANT Climate control is very useful to speed
up window demisting: therefore, perform demisting
procedure as described previously and then switch
the system on pressing button D.REAR WINDOW AND ELECTRIC DOOR
MIRROR DEMISTING/DEFROSTING
(where provided)
Press button C to turn this function on. When this
function is on, the button led turns on.
This function is timed and switches off
automatically after the preset time. To cut out this
function press again button C.
IMPORTANT Do not apply stickers on the inside of
the rear window over the heating filaments to avoid
damage that might cause it to stop working
properly.

87
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CLIMATE CONTROL
(cooling and dehumidification)
Proceed as follows
❒turn knob B to the blue sector to select
temperature;
❒turn knob A to the required speed;
❒set knob E to «;
❒set knob F to ….
❒press D
√(button led will turn on).
Cooling adjustment
Proceed as follows:
❒set knob F to Úto turn air recirculation off;
❒turn knob B to the right to raise temperature;
❒turn knob A to the left to reduce the fan speed.LOOKING AFTER THE SYSTEM
During the winter, the climate control system must
be turned on at least once a month for about ten
minutes. Before summer, have the system checked
at a Lancia Dealership.

88
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
AUTOMATIC TWO-ZONE CLIMATE CONTROL SYSTEM (where provided)
GENERAL
The car is fitted with a two-zone climate control
system which makes it possible to separately adjust
the air temperature on the driver’s side and on the
passenger’s side. Temperature control is based on
the “equivalent temperature” logic, i.e.: the system
continuously works to keep constant the comfort
inside the passenger compartment and to
compensate any variation of the outside climate
conditions, including sunshine detected by a proper
sensor provided for the purpose.
The climate control system automatically controls
and adjusts the following parameters and
functions:
❒air temperature at driver/front passenger vents;
❒air distribution at driver/front passenger vents;
❒fan speed (continuous air flow variation);❒compressor switching on (to cool/dehumidify
air);
❒air recirculation.
All the above functions can be changed manually at
any time, i.e.: you can always modify one or more
function settings. In this event, the system will no
longer implement the automatic control of the
functions changed manually (except for safety
reasons, e.g.: risk of window misting).
Manual selections prevail over automatic ones and
remain in storage until the user decides to resume
automatic control, except when the system cuts in
for particular safety conditions.
The control of functions not changed manually
remains automatic.
The amount of air admitted to the passenger
compartment does not depend on the car speed,
since it is electronically controlled by the fan.
In any case, the temperature of the air admitted to
the passenger compartment is controlled
automatically (except when the system is off)
according to the temperatures set on the driver’s
and front passenger’s displays or under certain
climatic conditions if the compressor is off).

89
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
The system enables to set or to change the
following parameters and functions
manually:
❒air temperatures on driver/front
passenger side;
❒fan speed (continuous variation);
❒air distribution on five levels
(driver/front passenger side);
❒climate control compressor on/off
enable;
❒monozone/two-zone distribution
priority;
❒fast demisting/defrosting;
❒air recirculation;
❒rear heated window;
❒system off;
CONTROLS
A MONO function button (for aligning set
temperatures)
B climate control compressor on/off
button
C inside air recirculation on/off button
D display showing climate control system
dataE climate control system off button
F MAX-DEF function button (front window fast
defrosting/demisting)
G rear window heating on/off button
H AUTO function button (automatic mode) and knob to
adjust temperature on passenger side
I buttons for air distribution on passenger side
L button for adjusting fan speed
M button for air distribution on driver side
N AUTO function button (automatic mode) and knob to
adjust temperature on driver side
L0D0065m