Lancia Musa 2008 Owner handbook (in English)

30
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Release of doors and tailgate (Key)
This function enables the release of
the front and rear doors, the release
of the driver's door only or the release
of all the doors including the tailgate.
To set the function, proceed as fol-
lows:
– press the MODEbutton for a short
time, the display shows “Open doors”,
“Op. drv.door” and “Open all”.
– press +or–to select; the selected
item will flash.
– Press MODEfor a short time to re-
turn to the menu screen or press the
button for a longer time to return to
the standard screen without confirm-
ing the selection. – briefly press button MODE: the
month starts flashing on the display;
– press button +or–to set the month;
– briefly press button MODE: the day
starts flashing on the display;
– press button +or–to set the day.
NOTE The setting increases or de-
creases by one unit each time button
+or–is pressed. Hold the button
pressed to start automatic quick in-
crease/decrease of the setting. Com-
plete the setting by briefly pressing
the button when the required setting
is approached.
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go back
to the standard screen without storing
the settings. 12h/24h clock mode
(Clock mode)
This function enables setting the
screen to either 12 or 24 hour mode.
Proceed as follows:
– briefly press button MODE: 12h or
24h starts flashing on the display (de-
pending on the previously set para-
meter);
– press button +or–for selecting the
desired value;
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go back
to the standard screen without storing
the settings.
Setting the date (Set Date)
This function enables updating the
date (year - month - day).
To update the date proceed as follows:
– briefly press button MODE: the
year starts flashing on the display;
– briefly press button +or–to set the
year;
007-037 MUSA 3ed GB 12-11-2007 11:33 Pagina 30

31
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Unit - “distance” (Dist. unit)
With this function it is possible to set
the units for distance covered (km or
mi).
To set the required unit proceed as
follows:
– briefly press button MODE: km or
mi will flash on the display (accord-
ing to previous setting);
– press button +or–for setting;
– briefly press button MODEto go
back to the menu screen or press the
button for long to go back to the stan-
dard screen without storing settings.Set this value as follows:
– briefly press button MODE: either
km/l or l/100 starts flashing on the
display (depending on the previously
set parameter);
– press button +or–for selecting the
desired value;
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go
back to the standard screen without
storing the settings. Setting the consumption unit
(Consumption)
This function enables setting the unit
for the amount of fuel consumed
(km/l, l/100 or mpg) depending on
the distance unit selected (either km
or miles - see previous paragraph
“Distance Unit”).
If the distance unit set is “km”, the
display enables setting of the fuel con-
sumption unit (km/l or l/100) de-
pending on the amount of fuel con-
sumed. If the distance unit set is “mi”,
the display shows the fuel consump-
tion unit in “mpg”.
007-037 MUSA 3ed GB 12-11-2007 11:33 Pagina 31

32
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Adjusting the failure/warning
buzzer volume (Buzzer Volume)
With this function the volume of the
buzzer accompanying any
failure/warning indication can be ad-
justed according to 8 levels. To adjust
the desired volume proceed as follows:
– briefly press button MODE: the pre-
viously set volume “level” starts flash-
ing on the display;
– press button +or–for selecting the
desired volume level;
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go back
to the standard screen without storing
the settings. Selecting the language
(Language)
The messages can be displayed in the
following languages: Italian, German,
English, Spanish, French, Portuguese.
To set the required language proceed
as follows:
– briefly press button MODE: the pre-
viously set “language” starts flashing
on the display;
– press button +or–for selecting the
desired language;
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go back
to the standard screen without storing
the settings. Setting the temperature unit
(Temp. unit)
This function enables setting of the re-
quired temperature unit (either °C or
°F).
To set the required unit proceed as
follows:
– briefly press button MODE: either
°C or °F starts flashing on the display
(depending on the previously set pa-
rameter);
– press button +or–for selecting the
desired value;
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go
back to the standard screen without
storing the settings.
007-037 MUSA 3ed GB 12-11-2007 11:33 Pagina 32

33
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Adjusting the button volume
(Button Vol.)
This function enables setting the vol-
ume of the roger-beep accompanying
the activation of buttons MODE,+
and–according to 8 levels.
To adjust the desired volume proceed
as follows:
– briefly press button MODE: the pre-
viously set volume “level” starts flash-
ing on the display;
– press button +or–to set the volume
level;
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go
back to the standard screen without
storing the settings.
S.B.R. buzzer reactivation
(Belt Buzzer) (where provided)
This function can only be displayed
after Lancia Dealership has deacti-
vated the S.B.R. system (see para-
graph “S.B.R. system” in section
“Safety devices”).The indications will appear more fre-
quently when there are 200 km left.
For 1.3 Multijet versions refer to the
instructions provided in the “Sched-
uled Servicing Plan” in section “Car
Maintenance” for air filter, engine oil
and engine oil filter replacement. The
indication will appear in kilometres or
miles according to the unit settings.
When the next scheduled servicing is
near, the message “Service” will ap-
pear on the display followed by the
number of kilometres or miles or days
left before servicing when the key is
turned to MAR. The “Scheduled Ser-
vicing” message shows information in
either kilometres (km) or miles (mi)
or in days (dd) depending on the
deadline showing up first. Go to the
Lancia Dealership where the servic-
ing operations envisaged in the
“Scheduled Service Plan” or “Yearly
Inspection Plan” will be performed
and the message will be reset. Scheduled Servicing (Service)
This function enables viewing of in-
formation on proper car servicing de-
pending on the kilometres travelled or
daily intervals.
This information is consulted as fol-
lows:
– briefly press button MODE: the dis-
play shows service requirements in
km or mi according to the previous
setting (see paragraph “Distance
unit”);
– press button +or–to view the ser-
vice interval in days;
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go back
to the standard screen.
NOTE According to the “Scheduled
Servicing Plan” the car must be ser-
viced every 20,000 km (or equivalent
mileage) or on a yearly basis. This
message appears automatically when
the key is positioned on MARafter
travelling for 2,000 km (or equivalent
mileage) or 30 days after the dead-
line. It appears every 200 km (or
equivalent mileage) or 3 days.
007-037 MUSA 3ed GB 12-11-2007 11:33 Pagina 33

34
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Passenger front and side airbag
activation/deactivation
(where provided) (Passenger bag)
This function is used to activate/de-
activate the front passenger’s airbag.
Proceed as follows:
❒press button MODE: the display
shows messages “Bag pass: Off” (to
deactivate) or “Bag pass: On” (to
activate). Press the buttons +and–
followed by button MODEagain;
❒the confirmation request message
will be displayed;
❒press buttons +or–to select either
Yes (to confirm activation/deacti-
vation) or No (to abort);
❒briefly press button MODE: the
display shows a message confirm-
ing the selected value. Now, go
back to the menu screen or press
the button for a prolonged time to
go back to the standard screen
without storing the settings.
MODE
MODE
MODE
– +
L0D2169g L0D2170g
L0D2171g L0D2172g
L0D2173g L0D2174gL0D2174g
L0D2175gL0D2176g
– +
– +
– +
007-037 MUSA 3ed GB 12-11-2007 11:33 Pagina 34

35
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Exiting the Menu
This is the last function that closes the
setting cycle listed in the initial menu
screen.
Briefly press button MODEto go
back to the standard screen without
storing the settings.
Press button +to return to the first
menu option (Speed Beep).Both functions can be reset (to start a
new trip).
The “General Trip” function is used
to display information relating to:
– Range
– Trip distance
– Average consumption
– Instant consumption
– Average speed
– Travel time (driving time).
The “Trip B” function is used to dis-
play information relating to:
– Trip distance B
– Average consumption B
– Average speed B
– Travel time B (driving time).
NOTE “Trip B” functions may be dis-
abled (see “Trip B on”). “Range” and
“Instantaneous consumption” cannot
be reset.TRIP COMPUTER
(where provided)
General features
The “Trip computer” is used to dis-
play information on car operation
when the key is turned to MAR. This
function includes a “General trip”
system that monitors the “entire mis-
sion” (trip) of the car and the “Trip
B” system that monitors the partial
mission of the car. The former func-
tion is part of the entire mission (as il-
lustrated in fig. 33).
007-037 MUSA 3ed GB 12-11-2007 11:33 Pagina 35

36
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
New mission
The new mission begins after:
– “manual” resetting by the user, by
pressing the relevant button;
– “automatic” resetting, when the
“Trip distance” reaches 9999.9 km or
when the “Travel time” reaches 99.59
(99 hours and 59 minutes);
– disconnection/reconnection of the
battery.
IMPORTANT The reset operations
performed after the “General Trip”
message appears are used to also re-
set the “Trip B”, which, on its turn, is
used to reset the values of the corre-
sponding function. Travel time
This value shows the time elapsed
since the start of a new mission.
IMPORTANT If information is not
available, the message “----” will ap-
pear instead of the Trip Computer
values. Displaying of the values will
be resumed regularly when normal
operation is restored without resetting
the values displayed before the failure
nor starting a new mission.
TRIP button fig. 32
ButtonTRIPlocated on the top of the
right steering column stalk is used
(with ignition key at MAR) to display
and reset the previously described val-
ues to start a new mission:
– short pressing to display the differ-
ent values;
– long pressing to reset and then start
a new mission. Values displayed
Range
It indicates the distance left to travel
based on the fuel in the tank assuming
that driving conditions will not change.
The message “----” will appear on the
display in the following cases:
- the range value is below 50 km (30
miles) or the fuel level is below 4
litres;
– car left parked with engine running
for long.
Trip distance
This value shows the distance covered
from the start of a new mission.
Average consumption
This value shows the average con-
sumption from the start of a new mis-
sion.
Instant consumption
This indicates the fuel consumption.
The value is constantly updated. The
message “----” will appear on the dis-
play if the car is parked with the en-
gine running.
Average speed
This value shows the car average
speed as a function of the overall time
elapsed since the start of the a mis-
sion.
fig. 32L0D0027m
007-037 MUSA 3ed GB 12-11-2007 11:33 Pagina 36

37
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Start of journey procedure
With ignition key at MAR,press and keep button TRIPpressed for over 2 seconds to reset.
Exit TRIP
ExitTRIPis performed automatically after having displayed all the related values or by keeping the button MODE
pressed for over 2 seconds.
Reset TRIP B
End partial mission
Start new
partial missionEnd partial mission
Start new
partial mission
Reset TRIP B
End partial mission
Start new partial mission Reset GENERAL TRIP
End entire mission
Start new missionReset GENERAL TRIP
End entire mission
Start new mission
End partial mission
Start new
partial mission Reset TRIP B
Reset TRIP B
TRIP B
TRIP B
TRIP B GENERAL TRIP
˙
˙
˙
˙
˙
˙˙
˙
fig. 33
007-037 MUSA 3ed GB 12-11-2007 11:33 Pagina 37

38
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Adjusting the backrest tilting
Move the lever D-fig. 34following the
direction of the arrow: bring the back-
rest to the desired position and then
release the lever.
Lumbar adjustment
(where provided)
The position of the driver’s back
against the seat backrest is adjusted
by turning the knob C-fig. 34clock-
wise to increase the lumbar push or
anticlockwise to reduce it.
SEAT
ADJUSTMENT
FRONT SEATS
Longitudinal adjustment
Lift the stalk A-fig. 33and push the
seat either forwards or backwards un-
til the desired position is reached:
your arms should rest on the steering
wheel rim while you are driving.
Check that the seat is firmly locked in
the runners by trying to move it back
and forth.
Height adjustment
(driver’s side) (where provided)
Move lever B-fig. 33upwards or
downwards to achieve the required
height.
IMPORTANT Adjust the seat sitting
on the driver’s seat after stopping the
car.
fig. 33L0D0041mfig. 34L0D0042m
After these adjustments,
make sure that the seats
are securely locked.
WARNING
038-094 MUSA 3ed GB 12-11-2007 11:34 Pagina 38

39
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Armrest adjustment
(where provided) fig. 35
To use the armrest bring it from
position1to position 2.
Positioning the passenger’s seat
to be used as a table
Bring the armrest (where provided) in
vertical position.
Sit on the driver’s seat or rear seats
and move the lever A-fig. 36follow-
ing the direction of the arrow: tilt the
backrest fig. 37on the cushion and
then release the lever. In this position
the back of the seat can be used as a
table.Seat warming (where provided)
The seat warming function is en-
abled/disabled by pressing the but-
tonsB-fig. 38to warm the driver’s
seat and C-fig. 38to warm the pas-
senger’s seat.
When the function is active, a led on
the button is on.
Positioning the seat
on the driver’s side to be used
as a table
To position the seat on the driver’s
side for using it as a table remove the
headrest (see paragraph “Headrest re-
moval” in section “Headrest”) fol-
lowing the previously described pro-
cedure.
fig. 35L0D0043mfig. 36L0D0044m
fig. 37L0D0045m
fig. 38L0D0046m
038-094 MUSA 3ed GB 12-11-2007 11:34 Pagina 39