tire pressure reset MAZDA 626 1987 Workshop Manual

4-WHEEL STEERING GEAR AND LINKAGE 1 0
(3) Raise the vehicle on a lift or safety stands.
(4) Set a dial indicator against one rear tire. Set
the pointer to 0.
86U10X-305
(5) With the marks on the steering wheel and
column cover aligned, start the engine and turn
the steering wheel slowly to the right. Using the
scale on the column cover, note the rotation
of the steering wheel at the point where the rear
wheels begin to turn (dial indicator begins to
move).
86U10X-306
(6) Turn the steering wheel left and right a few
times to equalize the hydraulic pressure. Re-
align the marks between the steering wheel
and column cover.
86U10X-307
(7) Reset the dial indicator to 0 and turn the steer-
ing wheel slowly to the left. Using the scale on
column cover, again note the rotation of the
steering wheel at the point where the rear
wheels begin to turn (dial indicator begins to
move).
86U10X-308
10-33