window MAZDA PROTEGE 1992 User Guide

INDEX
NDEX
1. Hood
Components ............................... page S- 5
2. Front fender panel
Components ............................... page S- 7
3. Front door
Components ............................... page S- 8
4. Front side window regulator and glass
Components ............................... page S-l 0
5. Front door lock and opener
Components ............................... page S-l 3
6. Power door lock system
Structural view.. .......................... page S-23
Troubleshooting guide.. .............. page S-24
Door lock switch.. ....................... page S-26
Door lock control.. ...................... page S-26
Door lock timer and relay ........... page S-26
7. Power window system
Structural view ............................ page S-27
Troubleshooting guide.. .............. page S-28
Main power window switch.. ...... page S-31
Power window sub-switch .......... page S-32
Power window motor .................. page S-32
8. Fuel filler lid and opener
Components ............................... page S-37
9. Front bumper
Components ............................... page S-39
23UOSX-03
10. Molding, protector, garnish
Upper windshield molding,
A-pillar garnish.. ........................ page S-42
Roof molding .............................. page S-46
Beltline molding.. ........................ page S-48
Side protector.. ...........................
page S-49
11. Radiator grille, lower grille molding
Components ....................... . ....... page S-51
12. Cowl grille
Components ............................... page S-53
13. Outside mirror
Troubleshooting guide ................ page S-54
Power outside mirror switch.. ..... page S-55
Power outside mirror.. ................ page S-56
Components ............................... page S-56
14. Windshield
Components ...............................
page S-58
15. Windshield wiper and washer
Troubleshooting guide.. .............. page S-67
Wiper motor ................................ page S-70
Washer motor.. ........................... page S-71
Windshield wiper and
washer switch ........................... page S-71
Components ............................... page S-72
16. Sliding sunroof
Troubleshooting guide ................ page S-80
Motor assembly.. ........................ page S-81
Sunroof relay ..............................
page S-82 .--‘-
Sunroof switch ............................ page S-82
Components ............................... page S-83
s-2

INDEX
1. Rear door
10. Rear bumper
Components ...............................
page S-l 5 Components ............................... page S-40
q 2. Rear side window regulator and glass
11. Rear spoiler
Components ...............................
page S-i 7 Components ............................... page S-41
3. Rear door lock and opener 12. Molding, protector, garnish
Components ...............................
page S-l 9 Rear window molding
4. Rear hatch (PROTEGE) ............................... page S-43
Components ............................... page S-20 Rear window molding
5. Rear hatch lock and opener (Hatchback) .............................. page S-44
Components ...............................
page S-22 Side protector ............................. page S-49
6. Power door lock system 13. Rear finisher
Structural view ............................
page S-23 Components ............................... page S-52
Troubleshooting guide.. .............. page S-24 14. Extractor chamber
Door lock switch.. .......................
page S-26 Components ................................ page S-53
Door lock control.. ...................... page S-26 15. Quarter window glass
Door lock timer and relay ...........
page S-26 Components ............................... page S-62
7. Power window system
16. Rear window glass
Structural view ............................
page S-27 Components ............................... page S-63
Troubleshooting guide.. .............. page S-28 17. Rear wiper and washer
Main power window switch.. ...... page S-31 Troubleshooting
guide.. .............. page S-74
Power window sub-switch ..........
page S-32 Rear wiper motor.. ...................... page S-77
Power window motor.. ................
page S-32 Rear washer motor.. ................... page S-77
8. Trunk lid Rear wiper and washer switch..
. page S-77
Components ...............................
page S-33 Components
............................... page S-78
9. Trunk lid lock and opener
Components ...............................
page
S-35
s-3

FRONT SIDE WINDOW REGULATOR AND GLASS
FRONT SIDE WINDOW REGULATOR AND GLASS
COMPONENTS
Removal / Installation
1, Raise the front door glass 1 1Omm (4.33 in) from the fully open position.
2. Disconnect the negative battery cable.
3. Remove in the order shown in the figure, referring to
Removal Note.
4. Install in the reverse order of removal.
Caution
l Remove the door screen carefully so that it may be reused.
Note
l Refer to page S-56; Removal of the door mirror for removal of the inner garnish.
-lATCHBACK
9 9
61-67 in-lb)
61-67 in-lb
1.1 . . v.. (70-100 cm-kg, 61-67 in-lb)
1. Regulator handle (Manual regulator)
7. Door screen
Removal
Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page S-12
8. Front door glass
2. Inner garnish
9. Glass run channel
3. Front door trim (Manual window)
10. Manual window regulator
4. Front door trim (Power window)
11. Power window regulator
5. Inner handle
6. Sealing pad Inspectron . . . , . . . . . , . . . , . . . . . . . . . . . . . . . . . . . . .
page S-32
s-10

FRONT SIDE WINDOW REGULATOR AND GLASS
‘ROTEGk
(70-100 cm-kg,
81-87 in-lb)
(70-100 cm-kg,
81-87 in-lb)
0
1. Regulator handle (Manual regulator) 7. Door screen
Removal Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page S-12 8. Front door glass
2. Inner garnish 9. Glass run channel
3. Front door trim (Manual window) 10. Manual window regulator
4. Front door trim (Power window) 11. Power window regulator
5. Inner handle Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page S-32
6. Sealing pad
S-l 1

S FRONT SIDE WINDOW REGULATOR AND GLASS
SMCJOSX-01
Removal Note
Regulator handle
Remove the regulator handle installation clip with a rag as
shown in the figure.
s-12

FRONT DOOR LOCK AND OPENER S
FRONTDOORLOCKANDOPENER
COMPONENTS
Removal / Installation
1. Raise the front door glass fully to remove the door lock assembly.
2. Disconnect the negative battery cable.
3. Remove in the order shown in the figure, referring to
Removal Note.
4. Install in the reverse order of removal.
Caution
l Remove the door screen carefully so that it may be reused.
Note
l Refer to page S-56; Removal of the door mirror for removal of the inner garnish.
1ATCHBACK
1. Regulator handle (Manual regulator) 7. Door screen
Removal Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page S-12 8. Lock control (Power door lock)
2. Inner garnish 9. Front door lock assembly
3. Front door trim (Manual window) 10. Outer handle
4. Front door trim (Power window) 11. Lock cylinder retainer
5. Inner handle 12. Lock cylinder
6. Sealing pad
s-13

S
r
FRONT DOOR LOCK AND OPENER
- 1
PROTEGk
03uosx
1. Regulator handle (Manual regulator)
Removal Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
2. Inner garnish
3. Front door trim (Manual window)
4. Front door trim (Power window) 5. Inner handle
6. Sealing pad 7.
Door screen S-12 8.
Lock control (Power door 9.
Front door lock assembly 10.
Outer handle 11.
Lock cylinder retainer 12.
Lock cylinder lock) .-,
S-l 4

REAR SIDE WINDOW REGULATOR AND GLASS
REAR SIDE WINDOW REGULATOR AND GLASS
COMPONENTS
Removal / Installation
1. Open the rear door glass fully.
2. Disconnect the negative battery cable.
3. Remove in the order shown in the figure, referring to Removal Note.
4. Install in the reverse order of removal, referring to Installation Note.
Caution
l Remove the door screen carefullv so that it may be reused.
3-9 61-67 in-lb) ,
03uosx-019
1. Regulator handle (Manual window) 9. Center channel, channel protector
Removal Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page S-l 2 10. Rear door glass
2. Rear door trim (Manual window) Removal Note ..,.....,..,................. page S-l 8
3. Rear door trim (Power window) Installation Note . . . . . . . . . . . . . . . . . . . . . . . . . . page S-18
4. Inner handle Il. Quarter window glass, weatherstrip
5. Pull handle bracket (Power window) 12. Manual window regulator
6. Rear power window switch 13. Power window regulator
7. Sealing pad 14. Glass run channel
8. Door screen
s-17

S REAR SIDE WINDOW REGULATOR AND GLASS
03UOSX-020
1
LIFT BRACKET
o3uosx-0:
Removal / Installation Note
Rear door glass
Manual window
1, Remove the window regulator roller from the large hole in
the lift bracket to remove the rear door glass.
2. Install in the reverse order of removal.
Power window
1. Remove the window regulator roller from the large hole in
the lift bracket to remove the rear door glass.
2. Install in the reverse order of removal.
s-1 8

REAR DOOR LOCK AND OPENER S
REAR DOOR LOCK AND OPENER
COMPONENTS
Removal / Installation
1. Raise the rear door glass fully to remove the door lock assembly.
2. Disconnect the negative battery cable.
3. Remove in the order shown in the figure, referring to Removal Note.
4. install in the reverse order of removal.
Caution
l Remove the door screen carefully so that it may be reused.
4.2-6.2 N-m
1, Regulator handle (Manual regulator) 7. Sealing pad
Removal Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page S-l 2 8. Door screen
2. Rear door trim (Power window) 9. Lock knob assembly
3. Rear door trim (Manual window) 10. Lock control (Power door lock)
4. inner handle 11, Rear door lock assembly
5. Pull handle bracket (power window) 12. Outer handle
6. Rear power window switch
s-19