display MITSUBISHI L200 2015 (in English) Service Manual

CD control panel and display
E00709501205
1- CD eject button
2- Disc-loading slot
3- FOLDER (Folder down) button 4- FOLDER (Folder up) button
5- TEXT (Title display) button
6- PAGE (Title scroll) button7- RPT (Repeat) button
8- RDM (Random) button
9-
(Fast-forward/Track up) button
10-
(Fast-reverse/Track down) button
11- PWR (On-Off) switch
12- CD (CD mode changeover) button
13-(Return) button
14-
(Select) button
15- RPT/RDM indicator
16- Track number indicator
17- Track play time indicator
18- CD indicator

LW/MW/FM electronic tuning radio with CD player (audio system type 1) *
7-26OKTE15E3For pleasant driving7

To listen to a CD
E00709602290
1. Insert a disc with the label facing up, and
the CD player will begin playing even ifanother mode is being used. The CD in- dicator (18), the track number (16), the
playing time (17) will appear on the dis-
play.
2. When the CD mode is selected by press-
ing the CD (12) button several times with the disc in the player, the CD player
will start playback.
3. To stop the CD, turn off the power by
pressing the PWR switch (11) or change
over to the another mode by pressing the
RADIO button or CD button, or eject the disc by pressing the eject button (1).
NOTEl To adjust the volume and tone, refer to
“To
adjust the volume” on page 7-17 and “To ad- just the tone” on page 7-17.
l An 8 cm compact disc cannot be played on
this CD player.
l For information concerning the handling of
compact discs, refer to “Handling of com-
pact discs (audio system type 1)” on page 7-49.To fast-forward/fast-reverse the
disc
Fast-forward
You can fast-forward the disc by pressing the
button (9). While the button is kept press-
ed, the disc will be fast-forwarded.
Fast-reverse
You can fast-reverse the disc by pressing the
button (10). While the button is kept
pressed, the disc will be fast-reversed.
NOTEl When you have fast-forwarded/fast-reversed
the disc, the playing-time may be shownwith deviation.To listen to an MP3 CD
This CD player allows you to play MP3
(MPEG Audio Layer-3) files recorded on CD-ROMs, CD-Rs (recordable CDs), andCD-RWs (rewritable CDs) in ISO9660 Level
1/Level 2, Joliet, and Romeo formats. Each disc may have a maximum of 16 trees, 100
folders, and 255 files per disc. During MP3 playback, the unit can display ID3 tag infor-
mation. For information concerning ID3 tag,
refer to “CD text and MP3 title display” on
page 7-30.
1. Insert a disc containing MP3 files into
the slot.
2. The display shows the folder number
and the file number, then playback will begin.
LW/MW/FM electronic tuning radio with CD player (audio system type 1) *
7-27OKTE15E3For pleasant driving7

NOTElWhile listening to a disc on which
CD-DA
(CD-Digital Audio) and MP3 files have both been recorded, you can switch between read-
ing of the CD-DA, reading of the MP3 files,
and the external audio input mode (AUX) by pressing the CD button for 2 seconds or lon-
ger.
l With a disc that contains both
CD-DA and
MP3 files, the CD-DA files are automatical-
ly played first.
l The playback sound quality differs depend-
ing on the encoding software and the bit
rate. For details, refer to the user manual of your encoding software.
l Depending on file/folder configurations on a
disc, it may take some time before playback
starts.
l MP3 encoding software and writing soft-
ware are not supplied with this unit.
l You may encounter trouble in playing an
MP3 or displaying the information of MP3
files recorded with certain writing software or CD recorders (CD-R/RW drivers).
l If you record too many folders or files other
than MP3 onto a disc, it may take some time before playback starts.
l This unit does not record MP3 files.
l For information concerning CD-Rs/RWs, re-
fer to “Notes on CD-Rs/RWs” on page
7-51.CAUTIONl Attempting to play a file not in the MP3 for-
mat which has a “.mp3” file name may pro-
duce noise from the speakers and speaker damage, and can damage your hearing.
Folder selection order/MP3 file playback
order (Example)
Root folder (root directory)Tree 4Tree 3Tree 2Tree 1Folder selectionIn the orderFile selectionIn the order
To select a desired folder (MP3
CDs only)
Folder up
Press the FOLDER button (4) until the de-
sired folder number appears on the display.
Folder down
Press the FOLDER button (3) until the de-
sired folder number appears on the display.
To select a desired track
Track up
Press the button (9) repeatedly until the
desired track number appears on the display.
Track down
Press the button (10) repeatedly until the
desired track number appears on the display.
NOTEl Pressing the button (10) once during the
song will cause the CD player to restart
playback from the beginning of the song.
LW/MW/FM electronic tuning radio with CD player (audio system type 1) *
7-28OKTE15E3For pleasant driving7

To find a file (MP3 CDs only)
Press the following buttons to select desiredfile.
The selected folder or file is shown in the dis-
play.
button (14): To start this mode
or cancel the selec-
tion. button (9) or
button (10)
: To show the folder or file. button (15): To select the folderor file.NOTEl If no operation is performed for 10 seconds
or more or another button is operated after
the
button or button has been pressed,
searching of the desired file is cancelled.
l If no operation is performed for
5 seconds or
more after the file is displayed, playback starts.
To repeat a track
Press the RPT button (7) briefly while the
track is playing. “RPT” will appear on thedisplay.
To exit the repeat mode, press the RPT but-
ton.
To repeat a folder (MP3 CDs
only)
Press the RPT button (7) for 1 second or lon-
ger (until you hear a beep). “F-RPT” will ap- pear on the display. You can listen to all the
files in the currently selected folder repeated-
ly.
NOTEl With a disc that contains both
CD-DA and
MP3 files, the repeat mode causes only files
of the same format ( CD-DA only or MP3
files only) to be repeated.
To play tracks in random order
Random playback for a disc (music CDs
only)
Press the RDM button (8) briefly. “RDM” will appear on the display. Tracks on the cur-
rently selected disc will be played in a ran- dom sequence.
To exit the random mode, press the RDM button again.
Random playback for a folder (MP3 CDs
only)
Press the RDM button (8) briefly. “F-RDM”
will appear on the display. Files on the cur-
rently selected folder will be played in a ran- dom sequence.
To exit the random mode, press the RDM
button again.
Random playback for all folders on a disc
(MP3 CDs only)
Press the RDM button (8) for 1 second or
longer (until you hear a beep). “RDM” will appear on the display. Files from all the fold-ers on the currently selected disc will be
played in a random sequence.
To exit the random mode, briefly press the RDM button again.
NOTEl With a disc that contains both
CD-DA and
MP3 files, the random mode causes only files of the same format ( CD-DA only or
MP3 files only) to be played in a random se-
quence.
To eject a disc
When the CD eject button (1) is pressed, the
disc automatically stops and is ejected.
NOTEl If you do not remove the disc before
15 seconds have elapsed, the CD player will
automatically reload the disc and stop.
LW/MW/FM electronic tuning radio with CD player (audio system type 1) *
7-29OKTE15E3For pleasant driving7

CD text and MP3 title display
E00725000676
This CD player can display CD text and MP3
titles including ID3 tag information.
CD text
The CD player can display disc and track ti- tles for discs encoded with disc and track title information. Press the TEXT button (5) re- peatedly to make selections in the following
sequence: disc name
track name nor-
mal display mode.
ExampleDisc
nameTrack
name
NOTEl The display can show up to 16 characters. If
a disc name or track name has more than 16characters, press the PAGE button (6) toview the next 16 characters.
l When there is no title information to be dis-
played, the display shows “NO TITLE”.NOTEl Characters that the CD player cannot display
are shown as “ ”.
MP3 title
The CD player can display folder and file ti-
tles for discs encoded with folder and file in-
formation. Press the TEXT button (5) for less
than 1 second repeatedly to make selections in the following sequence: folder name
file name normal display mode.
ExampleFolder
nameFile
name
ID3 tag information
The CD player can display ID3 tag informa-
tion for files that have been recorded with ID3 tag information. 1. Press the TEXT button (5) for 2 seconds
or longer to switch to the ID3 tag infor-
mation.
2. Then press the TEXT button for less
than 1 second repeatedly to make selec- tions in the following sequence: albumname
title name artist name
normal display mode.
NOTEl To return from ID3 tag information to the
folder name, press the TEXT button (5) again for 2 seconds or longer.
l When there is no title information to be dis-
played, the display shows “NO TITLE”.
l The display can show up to 16 characters. If
a folder name, track name, or item of ID3
tag information has more than 16 characters, press the PAGE button (6) to view the next16 characters.
l Folder names and track names can each be
displayed up to a length of 32 characters.Items of ID3 tag information can each be displayed up to a length of 30 characters.
l Characters that the CD player cannot display
are shown as “ ”.To play tracks from USB
device (audio system type 1)
* E00756101276
You can connect your iPod or USB memorydevice to the USB input terminal and play
music files stored in the iPod or USB memo- ry device.
To play tracks from USB device (audio system type 1) *
7-30OKTE15E3For pleasant driving7

See the following section for the types ofconnectable devices and supported files.
Refer to “Types of connectable devices and
supported file specifications” on page 7-105.
See the following sections for the connecting
methods, “How to connect an iPod” on page 7-104 and “How to connect a USB memory de-vice” on page 7-103.If your vehicle is equipped with a Bluetooth ®
2.0 interface, you can play music files in your iPod or USB memory device via voice opera- tion.
Refer to “To play iPod tracks via voice oper- ation” on page 7-33 and “To play USB
memory device tracks via voice operation” on page 7-40.NOTEl The protected file by copyright might not be
able to start playback.
l It is recommended to adjust the equalizer of
the connected device is flat.iPod control panel and display
E00756200238
1- PWR (On-Off) button
2- FOLDER (Folder down) button
3- FOLDER (Folder up) button
4- TEXT button
5- PAGE (Title scroll) button6- RPT (Repeat) button
7- RDM (Random) button
8-
(Fast-forward/Track up) button
9-
(Fast-reverse/Track down) button
10- RADIO button
11- CD (Mode change) button
12-
(Return) button
13-
(Select) button
14- iPod indicator
15- TRACK indicator
16- RPT/SHUFFLE/A-SHUFFLE indicatorTo play tracks from USB device (audio system type 1) *
7-31OKTE15E3For pleasant driving7

To play from an iPod
E00756300372
1. Press the PWR button (1) to turn on the
audio system. The system turns on in the last mode used.
2. Connect your iPod to the USB input ter-
minal.
Refer to “How to connect an iPod” on page 7-104.
3. Press the CD button (11) several times to switch to the iPod mode. The modechanges every time the CD button is
pressed.

CD mode → iPod mode → Bluetooth ®
mode*
NOTEl If your vehicle is equipped with Auxiliary
Audio connector (RCA), pressing and hold-
ing the CD button for 2 seconds or more
switches the system to the AUX mode.
4. Once the device is selected, playback
starts and “iPod” appears on the display.
NOTEl Depending on the condition of your iPod, it
may take a longer time before the playbackstarts.5. To stop the playback, change over to a
different mode.NOTEl Buttons on the iPod are disabled while the
iPod is connected to the audio system.
l To adjust the volume and tone, refer to “To
adjust the volume” and “To adjust the tone”.To fast-forward/reverse the
track
E00756400113
Fast-forward
To fast-forward the current track, press the
button (8). While the button is pressed, the
track will be fast-forwarded.
Fast-reverse
To fast-reverse the current track, press the
button (9). While the button is pressed, the
track will be fast-reversed.
To select a desired track
E00756500097
Track up
Press the button (8) repeatedly until the
desired track number appears on the display.
Track down
Press the button (9) repeatedly until the
desired track number appears on the display.
NOTEl Pressing the button (9) once during the
song will cause the audio system to restart
playback from the beginning of the song.To find a track from the iPod
menu
E00756600186
You can select desired tracks from the “Play- lists”, “Artists”,“Albums”, “Songs” or
“Genre” (vehicles with Bluetooth ®
2.0 inter-
face) menus on your iPod.
Press the following buttons to select desired tracks.
The selected menu or category or track is
shown in the display.
button
(12):To start this mode or cancel
the selection. button (8)
or
button
(9)
:To show the menu or cate-
gory or track.
To play tracks from USB device (audio system type 1) *
7-32OKTE15E3For pleasant driving7

button
(13):To select the menu or cate-
gory or track.NOTEl If no operation is performed for 10 seconds
or more or another button is operated after
the
button or button has been pressed,
searching of the desired tracks is cancelled.
l If no operation is performed for 5 seconds or
more after the track is displayed, playback starts.
To play the same track repeat-
edly
E00756700099
Press the RPT button (6) during playback to
show “RPT” in the display.
To exit this mode, press the button again.
To play tracks in random order
E00756900091
Press the RDM button (7) to show “SHUF-
FLE” in the display.The iPod randomly se- lects tracks from the current category and
plays the selected tracks.
To exit this mode, press the button again.
To play tracks in each album in
random order
E00757000099
Press and hold the RDM button (7) until you
hear a beep to show “A-SHUFFLE” in the
display.
The iPod randomly selects tracks in the al- bum from the current category and play the selected tracks.
To exit this mode, press the button again.
To switch the display
E00757100090
The display changes as follows every time the TEXT button (4) is pressed during play-back.
Album title → Track name → Artist name →
Genre (vehicles with Bluetooth ®
2.0 inter-
face) → Normal display
ExampleAlbum title
NOTEl Up to 16 characters are shown in the display
at once. If the title is cut off in the middle,press the PAGE button (5). The next charac-
ters are displayed every time this button is pressed.
l If no title is stored, “NO TITLE” is shown in
the display.
l Characters that cannot be displayed are sub-
stituted by “ ”.To play iPod tracks via voice
operation (vehicles with Blue-
tooth ®
2.0 interface)
E00757200046
Desired tracks can be selected and played
from your iPod by “Artist”, “Album”, “Play- list” and “Genre” using voice commands.For information concerning the voice recog- nition function or speaker enrollment func-
tion, refer to “Bluetooth®
2.0 interface” on
page 7-84.
The following explains how to prepare for voice operation and play the tracks.
To play tracks from USB device (audio system type 1) *
7-33OKTE15E3For pleasant driving7

USB control panel and display
E00758100231
1- PWR (On-Off) button
2- FOLDER (Folder down) button
3- FOLDER (Folder up) button
4- TEXT button
5- PAGE (Title scroll) button
6- RPT (Repeat) button7- RDM (Random) button
8-
(Fast-forward/File up) button
9-
(Fast-reverse/File down) button
10- RADIO button
11- CD (Mode change) button
12-
(Return) button
13-(Select) button
14- USB indicator
15- FOLDER indicator
16- FILE indicator
17- RPT/F-RPT/F-RDM/RDM/SCAN/ F-SCAN indicator

To play from a USB memory
device
E00762500366
1. Press the PWR button (1) to turn on the
audio system. The system turns on in the last mode used.
2. Connect your USB memory device to
the USB input terminal.
Refer to “How to connect a USB memo- ry device” on page 7-103.
3. Press the CD button (11) several times to switch to the USB mode. The modechanges as follows every time the CD
button is pressed.
CD mode → USB mode → Bluetooth ®
mode*
To play tracks from USB device (audio system type 1) *
7-37OKTE15E3For pleasant driving7

NOTElIf your vehicle is equipped with Auxiliary
Audio connector (RCA), pressing and hold-
ing the CD button for 2 seconds or more
switches the system to the AUX mode.
4. Once the device is selected, playback
starts and “USB” appears on the display.
NOTEl Depending on the condition of your USB de-
vice, it may take a longer time before the playback starts.
5. To stop the playback, change over to a
different mode.
NOTEl To adjust the volume and tone, refer to “To
adjust the volume” and “To adjust the tone”.Supported compressed music
files
E00758300305
This audio can play MP3, WMA, AAC and WAV files recorded in a USB memory de-
vice. This audio supports up to 65,535 files in 700 folders on 8 levels.
Folder selection order/file playback order
(example)
The folder and file hierarchy in the USB memory device is shown below.
Root folder (Root directory)Level 1Level 2Level 3Level 4Folder selectionIn the orderFile selectionIn the orderNOTEl If a file protected by copyrights is played,
the file will be skipped.To fast-forward/reverse the
track
E00758400090
Fast-forward
To fast-forward the current track, press the
button (8). While the button is pressed, the
track will be fast-forwarded.
Fast-reverse
To fast-reverse the current track, press the
button (9). While the button is pressed, the
track will be fast-reversed.
To select a file
E00758500088
File up
Press the button (8) repeatedly until the
desired file number appears on the display.
File down
Press the button (9) repeatedly until the
desired file number appears on the display.
To play tracks from USB device (audio system type 1) *
7-38OKTE15E3For pleasant driving7