Oil MITSUBISHI MONTERO 2000 Service Repair Manual

HEATER, AIR CONDITIONER AND VENTILATION -Service Specifications/Lubricants55B-2
SERVICE SPECIFICATIONS
ItemStandard value
Resistance value of the potentiometer for the air mix damper (front A/C) kWApprox. 0.96 - 5.76
Resistance value of the potentiometer for the air outlet changeover damper (front A/C)
kWApprox. 0.96 - 5.76
Resistance of the rear air conditioner switch (temperature control switch) heater (floor console)> kW0-3
Resistance of the potentiometer for the air mix damper kW1.2 - 4.8
Resistance value of the resistor (rear A/C)Between terminals 1 and 64.9±7%
WBetween terminals 1 and 31.25±7%
Air compressor air gap mm0.35 - 0.65
Idle speed r/min (N or P range)Petrol600±50
Idle-up speed r/min (N or P range)PetrolWhen the A/C is under
low load700±50
When the A/C is under
medium load800±50
When the A/C is under
high load1,000±50
LUBRICANTS
ItemBrandQuantity
Compressor oil mlSingle A/C cooler>DENSO OIL 8120±20
Single air conditioner rear cooler>, dual air conditionerDENSO OIL 8140±20
Pipe connectionsDENSO OIL 8As required
Refrigerant gSingle A/C cooler>R134a (HFC-134a)500±20
Single air conditioner rear cooler>, dual air conditionerR134a (HFC-134a)780±20


www.WorkshopManuals.co.uk


Purchased from www.WorkshopManuals.co.uk

P
ip e co nnectio ns
O -rin g
A /C co m pre sso r oil:
D EN SO OIL 8