NISSAN GT-R 2011 Owners Manual

Black plate (207,1)
Model "R35-N" EDITED: 2009/ 10/ 30
This allows to you adjust the speaker tone
quality and sound balance.1. Push .
2. Highlight [Audio] and push .
3. Highlight the preferred adjustment item and push .
4. Use the center dial to adjust the tone quality or sound balance.
5. After settings, push or<
>
to apply the setting.
6. Push <
>to return to the previous
screen.
Push

Black plate (208,1)
Model "R35-N" EDITED: 2009/ 10/ 30
This menu turns on and off the display, adjust
the image quality of the navigation screen and
change the color of the menu screen.BASIC OPERATION1. Push .
2. Highlight [Display] and push .
3. Highlight the preferred adjustment item and push .
Available setting items
. [Display Adjustment]
Turn on and off the display and adjust the
image quality of the navigation screen.
. [Color Theme]
Set the color of the menu screen.
DISPLAY ADJUSTMENTThis menu turns on and off the display and
adjusts the image quality of the navigation
screen.Basic operation1. Highlight [Display Adjustment] and push
.
2. Highlight the preferred adjustment item and push .
3. Use the center dial to adjust to the preferred setting.
4. After setting, push or<
>to
apply the setting.
5. Highlight <
>to return to the previous
screen. Push

Black plate (209,1)
Model "R35-N" EDITED: 2009/ 10/ 30
DisplayTo turn off the display, push.
The display can also be turned off by pushing
and holding <
OFF>for more than 2
seconds.
When any button is pushed with the display off,
the display turns on. The display will automati-
cally turn off when there is no switch operation
for 5 seconds.
To turn on the display, push <
OFF>.
BrightnessAdjust the display brightness by rotating the
center dial in the direction of [+] or [ ].
Each time [+] or [] is pushed, the display
brightness changes.ContrastAdjust the display contrast by rotating the center
dial in the direction of [+] or [].
Each time [+] or [] is pushed, the display
contrast changes.
Background colorSelect to toggle between the day screen and
night screen.
Day screen
Other settings
7-5

Black plate (210,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Night screen
INFO:
The background color setting can also be
changed using the .
SETTING COLOR THEME1. Highlight [Color Theme] and push TER>.
2. Highlight the preferred menu color and push .
This turns on and off, as well as adjusts, the
phone function (ringer, incoming and outgoing
volume) , the voice guide function and the beep
function.BASIC OPERATION1. Push .
2. Highlight [Volume & Beeps] and push .
3. Highlight the preferred adjustment item and push .
4. Use the center dial to adjust the volume. Push to set to on or off.
5. After setting, push or<
>to
apply the setting.
6. Push <
>to return to the previous
screen. Push

Black plate (211,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Available setting items
.[Audio Volume]:
Adjust the volume level of the audio system
by rotating the center dial in the direction of
[+] or [].
. [Guidance Volume]:
Adjust the volume level of voice guidance by
rotating the center dial in the direction of [+]
or [ ].
. [Ringtone]:
Adjust the volume level of the ringtone by
rotating the center dial in the direction of [+]
or [ ].
. [Incoming Call]:
Adjust the incoming call volume by rotating
the center dial in the direction of [+] or [ ].
. [Outgoing Call]:
Adjust the outgoing call volume by rotating
the center dial in the direction of [+] or [ ].
. [Switch Beeps]:
Select to toggle the beep function between
on and off. The indicator light illuminates
when the beep function is set to on. The
beep sounds when pushing and holding a
button or when a prohibited operation is
performed.
. [Guidance Voice]:
Select to toggle the voice guidance function between on and off. The indicator light
illuminates when the voice guidance func-
tion is set to on.
This changes the clock settings.BASIC OPERATION1. Push
.
2. Highlight [Clock] and push .
3. Highlight the preferred adjustment item and push .
4. Use the center dial to adjust to the preferred setting. Push to set on or off.
5. After setting, push or<
>to
apply the setting.
6. Push <
>to return to the previous
screen. Push

Black plate (212,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Available setting items
.[On-screen Clock]:
Select to toggle the clock display located in
the top right corner of the display between
on and off. The indicator light illuminates
when the clock display is set to on.
. [Clock Format (24h)]:
Select the clock format between 12-hour
and 24-hour times. The indicator light
illuminates when the clock is set to the 24-
hour format.
. [Offset (hour)]:
Use the center dial to adjust the offset value
(between 12 and +12) .
. [Offset (min)]:
Use the center dial to adjust the offset value
(between 59 and +59) .
. [Daylight Savings Time]:
Select to toggle the daylight savings time
setting between on and off. The indicator
light illuminates when the daylight savings
time setting is set to on. .
[Time Zone]:
Select an appropriate time zone from the list
that appears when this item is highlighted.
— Pacific
— Mountain
— Central
— Eastern
— Atlantic
— Newfoundland
— Hawaii
— Alaska
This key does not appear on the display until the
ignition switch is pushed to the ON position.
1. Push .
2. Highlight [Comfort] and push .
3. Highlight the preferred setting item and push . The indicator light of the
selected item illuminates.
4. After setting, push or<
>to
apply the setting.
5. Push <
>to return to the previous
screen. Push

Black plate (213,1)
Model "R35-N" EDITED: 2009/ 10/ 30
.Speed Sensing Wiper Interval:
When this item is turned to ON, the wiper
interval is adjusted automatically according
to the vehicle speed.
. Selective Door Unlock:
When this item is turned to ON, only the
driver’s door is unlocked first after the door
unlock operation. When the door handle
request switch on the driver’s or front
passenger’s side door is pushed to be
unlocked, only the corresponding door is
unlocked first. All the doors can be unlocked
if the door unlock operation is performed
again within 60 seconds.
When this item is turned to OFF, all the
doors will be unlocked after the door unlock
operation is performed once.
. Intelligent Key Lock/Unlock:
When this item is turned to ON, door lock/
unlock function by pushing the door handle
request switch will be activated.
. Return All Settings to Default:
Select this item, push and
choose “YES” if you want to return all
settings to the default.
This changes the language and measurement
unit used in the system.LANGUAGE SETTINGS1. Push .
2. Highlight [Others] and push .
3. Highlight [Language & Units] and push .4. Highlight [Select Language] and push TER>.
5. Highlight the preferred setting item and push . The indicator light of the
selected item illuminates.
Available languages
— [English]
— [Franc¸ ais]
— [Espan ˜
ol]
NOTICE
Do not change the ignition switch
position while changing the language.
Doing so may cause a system malfunc-
tion.
Other settings
7-9
LANGUAGE AND UNIT SETTINGS

Black plate (214,1)
Model "R35-N" EDITED: 2009/ 10/ 30
UNIT SETTINGS1. Push .
2. Highlight [Others] and push .
3. Highlight [Language & Units] and push .4. Highlight [Select Units] and push TER>.
5. Highlight the preferred unit and push TER>. The indicator of the selected unit
illuminates.
Available units
— US:
mile, MPH, 8F, MPG
— Metric: km, km/h, 8C, L/100 km
6. Push <
>to return to the previous
screen. Push

Black plate (215,1)
Model "R35-N" EDITED: 2009/ 10/ 30
5. Highlight the preferred unit and push TER>. The indicator of the selected unit
illuminates.
Available units
— psi
— kPa
6. Push <
>to return to the previous
screen.
The image files in the USB memory will be
displayed.1. Press .
2. Select [Others] and press .
3. Select [Image Viewer] and press TER>.
The image of the selected file is displayed on the
right side of the screen.
When a number of folders are included in the
USB memory, select a folder from the list and
push to display the file list.
FULL SCREEN DISPLAYThe full screen display will appear when select-
ing [Full Screen Display] and press .
To operate the Image Viewer or to change the
settings, select the desired key.
.
(Start)
Select “
” and push to
start playing the slideshow.
.
(Stop)
Select “
” and push to
stop the slideshow.
.
(Next)
Select “
” and push to
display the next file.
.
(Previous)
Select “
” and push to
Other settings
7-11
IMAGE VIEWER

Black plate (216,1)
Model "R35-N" EDITED: 2009/ 10/ 30
display the previous file.
SETTING THE IMAGE VIEWERThe Image Viewer setting display will appear
when selecting [Settings] on the full screen
display and pushing. The following
settings are available for the full screen display.
. Slideshow Speed
Choose [Slideshow Speed] and push TER>. From the following display, select the
changing time from 5, 10, 30, 60 seconds or
“No Auto Change”.
. Slideshow Order
Choose [Slideshow Order] and push TER>. From the following display, select
“Random” or “Order List”.Operating tips. Only files that meet the following conditions
will be displayed.
— File format: JPEG (“.jpg” or “.jpeg”)
— File size: 2 MB or less
— Display size: 1,536 62,048 pixels or
less
. If an electronic device (such as a digital
camera) is directly connected to the vehicle
using a USB cable, no image will be
displayed on the screen. .
If the file name is too long, some file names
may not be entirely displayed.7-12
Other settings