NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide PATROL 1998 Y61 / 5.G NISSAN NISSAN https://www.carmanualsonline.info/img/5/618/w960_618-0.png NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide
Trending: engine coolant, oil, coolant reservoir, low oil pressure, engine oil, maintenance, check engine

Page 11 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide Pull the negative pressure valve to open it. Check that it closes
completely when released.
CHECKING COOLING SYSTEM FOR LEAKS
Apply pressure to the cooling system by means of a tester to check
for lea

Page 12 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide INSPECTION
1. Check for rusted or corroded body assembly and vane.
2. Check for excessive end play and rough operation.
INSTALLATION
+Remove liquid gasket from mating surface of pump housing
using a s

Page 13 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide +Apply a continuous bead of liquid gasket to mating surface of
pump housing as shown.
a. Be sure diameter of liquid gasket is within 2.0 to 3.0 mm
(0.079 to 0.118 in) dia. range.
b. Attach pump housin

Page 14 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide +Cut off tip of nozzle of liquid gasket at point shown in ®gure.
+Use Genuine Liquid Gasket or equivalent.
+Apply a continuous bead of liquid gasket to mating surface of
water inlet.
a. Be sure diame

Page 15 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide Radiator
REMOVAL AND INSTALLATION
1. Remove under cover.
2. Drain coolant from radiator drain plug.
3. Disconnect radiator upper and lower hoses.
4. Remove radiator lower shroud.
5. Disconnect reservo

Page 16 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide Cooling Fan (Crankshaft driven)
DISASSEMBLY AND INSTALLATION
+Do not release the drive belt tension by removing the fan/water
pump pulley.
+Fan coupling cannot be disassembled and should be replaced
a

Page 17 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide Radiator (Aluminum type)
Aluminum radiator can be disassembled by using special proce-
dures and special service tools.
DISASSEMBLY
1. Remove tank with Tool.
+Grip the crimped edge and bend it upwards

Page 18 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide +In areas where Tool cannot be used, use a screwdriver to bend
the edge up.
Be careful not to damage tank.
2. Make sure the edge stands straight up.
3. Remove oil cooler from tank. (A/T model only)
AS

Page 19 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide 4. Caulk tank in speci®ed sequence with Tool.
+Use pliers in the locations where Tool cannot be used.
5. Make sure that the rim is completely crimped down.
Standard height ``H:
10.0 - 11.0 mm (0.39

Page 20 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System User Guide INSPECTION
1. Apply pressure with Tool.
Speci®ed pressure value:
98 kPa (0.98 bar, 1.0 kg/cm
2, 14 psi)
WARNING:
To prevent the risk of the hose coming undone while under
pressure, securely fasten it
Page:   < prev 1-10 11-20 21-30 next >
Trending: check engine, engine oil, maintenance, engine coolant, oil, coolant reservoir, low oil pressure