camera NISSAN TEANA 2008 Service Manual

AV-254
< COMPONENT DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
STEERING ANGLE SENSOR SIGNAL CIRCUIT
3. Turn ignition switch ON.
4. Check signal between camera control unit harness connector and ground.
Is inspection result normal?
YES >> INSPECTION END
NO >> Replace steering angle sensor.
(+)
(−) Condition Reference value Camera control unit
Connector Terminals
B25123, 24 GroundTurn the steering to the right
A: Sensor signal 1
B: Sensor signal 2
Turn the steering to the left
A: Sensor signal 1
B: Sensor signal 2
25 GroundTurn the steering around the
neutral position
A: Sensor signal 3
B: Sensor signal 1
SKIB3827E
SKIB3828E
SKIB3829E

AV-262
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
AV CONTROL UNIT
15
(L/B)GroundSteering switch signal
ground—Ignition
switch
ON—0 V
16
(GR/L)15
(L/B)Steering switch signal B InputIgnition
switch
ONKeep pressing VOL DOWN
switch.0 V
Keep pressing VOL UP
switch.0.7 V
Except for above. 3.3 V
19
(Y)Ground Battery power supply InputIgnition
switch
OFF— Battery voltage
20
(B/W)Ground Ground —Ignition
switch
ON—0 V
33 — FM sub Input — — —
34 — AM–FM main Input — — —
35 Ground Antenna amp. ON signal OutputIgnition
switch
ACC— 12.0 V
36
(B)Ground Composite image signal OutputIgnition
switch
ONWhen camera image, DVD
image or AUX image is dis-
played.
37
(W)GroundComposite image signal
ground—Ignition
switch
ON—0 V
38
(B)Ground RGB image signal (B: blue) OutputIgnition
switch
ONStart confirmation/adjust-
ment mode, and then dis-
play color bar by selecting
“Color Spectrum Bar” on
DISPLAY DIAGNOSIS
screen.
39
(R)GroundRGB image signal (G:
green)OutputIgnition
switch
ONStart confirmation/adjust-
ment mode, and then dis-
play color bar by selecting
“Color Spectrum Bar” on
DISPLAY DIAGNOSIS
screen. Terminal
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB2251J
SKIB2237J
SKIB2236J

AV
AV CONTROL UNIT
AV-263
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P40
(W)Ground RGB image signal (R: red) OutputIgnition
switch
ONStart confirmation/adjust-
ment mode, and then dis-
play color bar by selecting
“Color Spectrum Bar” on
DISPLAY DIAGNOSIS
screen.
41
(G)Ground RGB synchronizing signal OutputIgnition
switch
ON—
42 —RGB synchronizing signal
shield—— — —
43
(B)Ground RGB area (YS) signal OutputIgnition
switch
ONWhen RGB image is dis-
played.5.0 V
When camera image, DVD
image or AUX image is dis-
played.
44
(G)GroundCommunication signal
(DISP→CONT)InputIgnition
switch
ONWhen adjusting display
brightness.
45
(W)GroundHorizontal synchronizing
(HP) signalInputIgnition
switch
ON—
46
(LG)Ground Signal ground —Ignition
switch
ACC——
47
(O)Ground Signal VCC OutputIgnition
switch
ACC—9.0 V
49 — Shield — — — —
50 — RGB signal Shield — — — —
55 — Shield — — — —Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB2238J
SKIB3603E
PKIB4948J
PKIB5039J
SKIB3601E

AV-264
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
AV CONTROL UNIT
56
(R)GroundCommunication signal
(CONT→DISP)OutputIgnition
switch
ONWhen adjusting display
brightness.
57
(R)GroundVertical synchronizing (VP)
signalInputIgnition
switch
ON—
58
(BR)Ground Inverter ground —Ignition
switch
ACC——
59
(Y)Ground Inverter VCC OutputIgnition
switch
ACC— 9.0 V
64 —Camera image signal
shield—— — —
65
(Y)Ground Camera image signal InputIgnition
switch
ONWhen camera image is dis-
played.
66
(V)GroundComposite (DVD and AUX)
image signalInputIgnition
switch
ONWhen DVD image or AUX
image is displayed.
68
(W)GroundCamera connection recog-
nition signalInputIgnition
switch
ONConnected to camera con-
trol unit connector.0 V
Not connected to camera
control unit connector.5.0 V
73 —Composite image signal
shield—— — —
74
(G)GroundComposite (DVD and AUX)
image signal ground—Ignition
switch
ON—0 V Terminal
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
PKIB5039J
SKIB3598E
SKIB2251J
SKIB2251J

AV
AV CONTROL UNIT
AV-285
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
DTC Display item Refer to
U1000 CAN COMM CIRCUIT [U1000]AV- 2 1 6 , "
DiagnosisProcedure"
U1010 CONTROL UNIT (CAN) [U1010]AV- 2 1 7 , "Diagnosis Procedure"
U1310 CONTROL UNIT (AV) [U1310]AV-218, "DTC Logic"
U1200 Control Unit FLASH-ROM [U1200]AV-219, "DTC Logic"
U1216 CAN CONT [U1216]AV-220, "DTC Logic"
U1231 AMP TEMP [U1231]AV-221, "DTC Logic"
U1243 FRONT DISP CONN [U1243]AV- 2 2 2 , "Diagnosis Procedure"
U1250 CAMERA CONT. CONN [U1250]AV- 2 2 4 , "Diagnosis Procedure"
U1260 CENTER SP OPEN [U1260]AV- 2 2 6 , "Diagnosis Procedure"
U1261 CENTER SP SHORT [U1261]AV- 2 2 6 , "Diagnosis Procedure"
U1262 CENTER SP GND-SHORT [U1262]AV- 2 2 6 , "Diagnosis Procedure"
U1263 CENTER SP VB-SHORT [U1263]AV- 2 2 6 , "Diagnosis Procedure"
U1264 FR-DOOR SP OPEN [U1264]AV- 2 2 7 , "Diagnosis Procedure"
U1265 FR-DOOR SP SHORT [U1265]AV- 2 2 7 , "Diagnosis Procedure"
U1266 FR-DOOR SP GND-SHORT [U1266]AV- 2 2 7 , "Diagnosis Procedure"
U1267 FR-DOOR SP VB-SHORT [U1267]AV- 2 2 7 , "Diagnosis Procedure"
U1268 RR-SP/FR-WOOFER OPEN [U1268]AV- 2 2 8 , "Diagnosis Procedure"
U1269 RR-SP/FR-WOOFER SHORT [U1269]AV- 2 2 8 , "Diagnosis Procedure"
U126ARR-SP/FR-WOOFER GND-SHORT
[U126A]AV- 2 2 8 , "Diagnosis Procedure"
U126B RR-SP/FR-WOOFER VB-SHORT [U126B]AV- 2 2 8 , "Diagnosis Procedure"
U126C RR-SURROUND SP OPEN [U126C]AV- 2 2 9 , "Diagnosis Procedure"
U126D RR-SURROUND SP SHORT [U126D]AV- 2 2 9 , "Diagnosis Procedure"
U126E RR-SURROUND SP GND-SHORT [U126E]AV- 2 2 9 , "Diagnosis Procedure"
U126F RR-SURROUND SP VB-SHORT [U126F]AV- 2 2 9 , "Diagnosis Procedure"
U1274 RL-SURROUND SP OPEN [U1274]AV- 2 3 0 , "Diagnosis Procedure"
U1275 RL-SURROUND SP SHORT [U1275]AV- 2 3 0 , "Diagnosis Procedure"
U1276 RL-SURROUND SP GND-SHORT [U1276]AV- 2 3 0 , "Diagnosis Procedure"
U1277 RL-SURROUND SP VB-SHORT [U1277]AV- 2 3 0 , "Diagnosis Procedure"
U1278 RL-SP/FL-WOOFER OPEN [U1278]AV- 2 3 1 , "Diagnosis Procedure"
U1279 RL-SP/FL-WOOFER SHORT [U1279]AV- 2 3 1 , "Diagnosis Procedure"
U127A RL-SP/FL-WOOFER GND-SHORT [U127A]AV- 2 3 1 , "Diagnosis Procedure"
U127B RL-SP/FL-WOOFER VB-SHORT [U127B]AV- 2 3 1 , "Diagnosis Procedure"
U127C FL-DOOR SP OPEN [U127C]AV- 2 3 2 , "Diagnosis Procedure"
U127D FL-DOOR SP SHORT [U127D]AV- 2 3 2 , "Diagnosis Procedure"
U127E] FL-DOOR SP GND-SHORT [U127E]AV- 2 3 2 , "Diagnosis Procedure"
U127F FL-DOOR SP VB-SHORT [U127F]AV- 2 3 2 , "Diagnosis Procedure"
U1294 FR-TWEETER OPEN [U1294]AV- 2 3 3 , "Diagnosis Procedure"
U1295 FR-TWEETER SHORT [U1295]AV- 2 3 3 , "Diagnosis Procedure"
U1296 FR-TWEETER GND-SHORT [U1296]AV- 2 3 3 , "Diagnosis Procedure"
U1297 FR-TWEETER VB-SHORT [U1297]AV- 2 3 3 , "Diagnosis Procedure"
U1298 FL-TWEETER OPEN [U1298]AV- 2 3 4 , "Diagnosis Procedure"
U1299 FL-TWEETER SHORT [U1299]AV- 2 3 4 , "Diagnosis Procedure"
U129A FL-TWEETER GND-SHORT [U129A]AV- 2 3 4 , "Diagnosis Procedure"

AV-286
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
AV CONTROL UNIT
U129B FL-TWEETER VB-SHORT [U129B]AV- 2 3 4 , "Diagnosis Procedure"
U1300
U1240 AV COMM CIRCUIT [U1300]
 SWITCH CONN [U1240]AV-235, "Description"
U1300
U124E AV COMM CIRCUIT [U1300]
 AMP CONN [U124E]AV-235, "Description"
U1300
U1248 AV COMM CIRCUIT [U1300]
 DVD DECK CONN [U1248]AV-235, "Description"
U1300
U1248
U124E AV COMM CIRCUIT [U1300]
 DVD DECK CONN [U1248]
 AMP CONN [U124E]AV-235, "
Description"
U1300
U1248
U124E
U1252 AV COMM CIRCUIT [U1300]
 DVD DECK CONN [U1248]
 AMP CONN [U124E]
 REAR-CAMERA LAN CONN [U1252]AV-235, "
Description"
DTC Display item Refer to

AV-288
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
DISPLAY UNIT
9
(B)Ground RGB area (YS) signal InputIgnition
switch
ONWhen RGB image is dis-
played.5.0 V
When camera image, DVD
image or AUX image is dis-
played.
11
(R)GroundCommunication signal
(CONT→DISP)InputIgnition
switch
ONWhen adjusting display
brightness.
13
(BR)Ground Inverter ground —Ignition
switch
ON —0 V
14
(LG)Ground Signal ground —Ignition
switch
ON—0 V
15
(B)Ground Composite image signal InputIgnition
switch
ONWhen rear view camera im-
age, DVD image or AUX
image is displayed.
17
(W)Ground RGB image signal (R: red) InputIgnition
switch
ONStart confirmation/adjust-
ment mode, and then dis-
play color bar by selecting
“Color Spectrum Bar” on
DISPLAY DIAGNOSIS
screen.
18
(B)Ground RGB image signal (B: blue) InputIgnition
switch
ONStart confirmation/adjust-
ment mode, and then dis-
play color bar by
selecting“Color Spectrum
Bar” on DISPLAY DIAGNO-
SIS screen. Terminal
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
PKIB4948J
PKIB5039J
SKIB2251J
SKIB2238J
SKIB2237J

AV
CAMERA CONTROL UNIT
AV-351
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
CAMERA CONTROL UNIT
Reference ValuesINFOID:0000000003793617
TERMINAL LAYOUT
PHYSICAL VALUES
JPNIA0007ZZ
Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
5—Shield —— — —
6
(B)Ground Camera image signal InputIgnition
switch
ONWhen rear view camera im-
age is displayed.
7
(W)Ground Rear view camera ground —Ignition
switch
ON—0 V
8
(R)Ground Camera power supply OutputIgnition
switch
ON Selector lever in R position. 6.0 V
Other than selector lever in
R position.0 V
11 — S h i e l d — — — —
12
(BR)Ground Camera image signal OutputIgnition
switch
ONWhen rear view camera im-
age is displayed.
14
(GR)GroundCamera connection recog-
nition signalOutputIgnition
switch
ONConnected to camera con-
trol unit connector.0 V
Not connected to camera
control unit connector.5.0 V
17
(L/G)—AV communication signal
(L)Input/
Output—— —
18
(L/R)—AV communication signal
(H)Input/
Output—— —
19
(P)—AV communication signal
(L)Input/
Output—— —
SKIB2251J
SKIB2251J

AV-352
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
CAMERA CONTROL UNIT
20
(L)—AV communication signal
(H)Input/
Output—— —
22
(W)Ground Reverse signal InputIgnition
switch
ONSelector lever in R position. 12.0 V
Other than selector lever in
R position.0 V
23
(G)Ground Sensor signal 1 InputIgnition
switch
ONTurn the steering to the
right.
A: Sensor signal 1
B: Sensor signal 2
Turn the steering to the left.
A: Sensor signal 1
B: Sensor signal 2
24
(SB)Ground Sensor signal 2 InputIgnition
switch
ONTurn the steering to the
right.
A: Sensor signal 1
B: Sensor signal 2
Turn the steering to the left.
A: Sensor signal 1
B: Sensor signal 2
25
(O)Ground Sensor signal 3 InputIgnition
switch
ONTurn the steering around
the neutral position.
A: Sensor signal 3
B: Sensor signal 1 Terminal
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB3827E
SKIB3828E
SKIB3827E
SKIB3828E
SKIB3829E

AV
CAMERA CONTROL UNIT
AV-353
< ECU DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
26
(O)GroundVehicle speed signal
(8-pulse)InputIgnition
switch
ONWhen vehicle speed is ap-
prox. 40 km/h (25 MPH).NOTE:
The maximum voltage varies de-
pending on the specification
(destination unit).
30
(V)Ground ACC power supply InputIgnition
switch
ACC— Battery voltage
31
(B/R)Ground Ground —Ignition
switch
ON—0 V
32
(Y)Ground Battery power supply InputIgnition
switch
OFF— Battery voltage Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIA6649J