warning light RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual

RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual KANGOO 1997 KC / 1.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1730/w960_1730-0.png RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual

Page 13 of 83

RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual IMMOBILISER
Coded key immobiliser system
DESCRIPTION
With this system the engine immobiliser is activa-
ted 10 seconds after switching off the ignition
(shown by the flashing of the red engine immobi-

Page 14 of 83

RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual IMMOBILISER
Coded key immobiliser system
82
• An antenna ring  (C) around the ignition
switch, with an electronic unit which transmits
the key code to the decoder unit (D).
NOTE : This antenna ring

Page 15 of 83

RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual IMMOBILISER
Coded key immobiliser system
82
Removal - Refitting
The dashboard must be partially removed to re-
move the decoder unit.
Remove:
- the steering wheel with the wheels straight,
- the half

Page 16 of 83

RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual IMMOBILISER
Coded key immobiliser system
OPERATION
When the immobiliser system is activated (ap-
proximately 10 seconds after cutting + after igni-
tion feed), the red immobiliser warning light
flashe

Page 17 of 83

RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual IMMOBILISER
Coded key immobiliser system
REPLACING A KEY HEAD
The coded chip in the key head or the remote
control (depending on equipment) is faulty :
- order a replacement key head using the num-
be

Page 18 of 83

RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual 5.Check the immobiliser system operates cor-
rectly with both keys.
Ignition off, the red immobiliser warning light
should flash 10 seconds after switching the
ignition off (slow flashing). Bargraph

Page 19 of 83

RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual 5.Connect the XR25, setting the ISO selector to
S8.
Enter  code
Bargraphs 
19 RH and 19 LH must be illumina-
ted (programming not carried out).
6. With one of the keys switch the ignition on
for appro

Page 20 of 83

RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual 11. Switch the ignition off and on again for a few
seconds without starting the engine to pro-
gramme the immobiliser code for the new kit
in the injection computer or coded solenoid
valve. The red wa

Page 21 of 83

RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual REPLACING THE INJECTION COMPUTER OR
CODED SOLENOID VALVE
The injection computer and coded solenoid valve
are supplied uncoded.  The engine immobiliser
code must be programmed in when they are fit-
ted

Page 23 of 83

RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual NOTE : this fault may be shown by the XR25  (in
injection fault finding).
Connect the XR25 and enter the injection code.
The fault is shown by bargraph 2 RH side.
After entering
the message
on the XR2
Page:   1-10 11-20 21-30 31-40 40 next >