head gasket RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual KANGOO 1997 KC / 1.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1731/w960_1731-0.png RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual

Page 3 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual Contents
Consumables
Identification
Oil consumption
Oil pressure
Engine - Gearbox
Engine and transmission assembly
Sump
Crankshaft seal, timing end
Oil pump10-1
10-1
10-2
10-3
10-4
10-9
10-25
10-29
10

Page 46 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual 12mm torx  socket  
Angular  tightening wrench
TOP AND FRONT OF ENGINE
Cylinder head gasket
11
SPECIAL TOOLING REQUIRED
Mot. 591-04 Angle wrench for  tightening
cylinder head  and index
Mot. 1202 Hose

Page 47 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual TOP AND FRONT OF ENGINE
Cylinder head gasket
11
- the canister pipe along with the fuel vapour
rebreathing hoses on the solenoid valve,
- the connectors :
• of the ignition module,
• of the inject

Page 48 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual TOP AND FRONT OF ENGINE
Cylinder head gasket
11
Remove :
- the mounting bolts (5) for the throttle body  retaining bracket on the
cylinder head,
- the  mounting  nuts (3) for  the manifold on the cyli

Page 49 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual TOP AND FRONT OF ENGINE
Cylinder head gasket
11
92076S
CLEANING
It is very important not to scratch  the gasket faces
of the aluminium components.
Use the Décapjoint  product to dissolve any part of

Page 50 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual TOP AND FRONT OF ENGINE
Cylinder head gasket
11
99902S
Tighten the cylinder head using an angular tighte-
ning wrench (see section  07 "Tightening the cy-
linder head").
Tighten using tool  Mot. 591-0

Page 51 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual TOP AND FRONT OF ENGINE
Cylinder head gasket
11
ADJUSTMENT OF VALVE ROCKERS (IF
NECESSARY) 
Partly refit the suspended engine mounting ti-
ming cover on the engine using two bolts.
Bring  the  engine

Page 52 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual TOP AND FRONT OF ENGINE
Cylinder head gasket
11
SPECIAL TOOLING REQUIRED 
DEPOSE
Place the vehicle on a 2 post lift .
Disconnect the battery.
Remove  :
- the  bonnet ,
- the timing belt  (see method d

Page 53 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual TOP AND FRONT OF ENGINE
Cylinder head gasket
11
13339S
- the cover on the air filter assembly,
- the air filter assembly,
13338S
99310R
Remove :
- the connector along with the  pipe on the  ab-
solute

Page 54 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual - the heat shield along with the exhaust down-
pipe,
- the alternator,
- the mounting at (8) along with connector  (9)
of the pressostat,
- the  mounting bolt for the power assisted
steering pump   an
Page:   1-10 11-20 next >