RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual https://www.carmanualsonline.info/img/7/1719/w960_1719-0.png RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual

Page 211 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-32
MECHANICAL COMPONENT CONTROLS
Brake pedal: Removal - Refitting
RIGHT-HAND DRIVE, and 5-SPEED MANUAL GEARBOX
37A
aRemove:
-the clutch master cylinder rod (4) ,
-the nuts (5) from the clutch mast

Page 212 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-33
MECHANICAL COMPONENT CONTROLS
Brake pedal: Removal - Refitting
RIGHT-HAND DRIVE, and 5-SPEED MANUAL GEARBOX
37A
III - OPERATION FOR REMOVAL OF PART 
CONCERNED
aRemove the clutch cable (10) aRem

Page 213 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-34
MECHANICAL COMPONENT CONTROLS
Brake pedal: Removal - Refitting
RIGHT-HAND DRIVE, and 5-SPEED MANUAL GEARBOX
37A
aRemove the connecting shaft (13) between the bra-
ke pedal and the brake servo p

Page 214 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-35
MECHANICAL COMPONENT CONTROLS
Brake pedal: Removal - Refitting
RIGHT-HAND DRIVE, and 5-SPEED MANUAL GEARBOX
37A
aAlways replace the aluminium pedal pads after re-
moving them.
II -  REFITTING O

Page 215 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-36
MECHANICAL COMPONENT CONTROLS
Brake pedal: Removal - Refitting
RIGHT-HAND DRIVE, and 5-SPEED MANUAL GEARBOX
37A
aBond the pedal pad (19) to the pedal (20) by press-
ing on the right-hand side.

Page 216 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-37
MECHANICAL COMPONENT CONTROLS
Brake pedal: Removal - Refitting
5-SPEED MANUAL SEQUENTIAL GEARBOX
37A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aDisconnect the battery (see Battery: Removal - Re

Page 217 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-38
MECHANICAL COMPONENT CONTROLS
Brake pedal: Removal - Refitting
5-SPEED MANUAL SEQUENTIAL GEARBOX
37A
REFITTING
I - REFITTING PREPARATIONS OPERATION
aThe shaft connecting the brake servo pushrod

Page 218 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-39
MECHANICAL COMPONENT CONTROLS
Brake pedal: Removal - Refitting
LEFT-HAND DRIVE, and 5-SPEED MANUAL GEARBOX
37A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aMark the switch wiring routing on the p

Page 219 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-40
MECHANICAL COMPONENT CONTROLS
Brake pedal: Removal - Refitting
LEFT-HAND DRIVE, and 5-SPEED MANUAL GEARBOX
37A
aRemove the nuts (5) of the « brake - clutch pedal
assembly » .
aGently lower th

Page 220 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 37A-41
MECHANICAL COMPONENT CONTROLS
Brake pedal: Removal - Refitting
LEFT-HAND DRIVE, and 5-SPEED MANUAL GEARBOX
37A
III - REFITTING OPERATION FOR THE ALUMINIUM 
PEDAL PADS
aCheck that the pedal is a