RENAULT TWINGO RS 2009 2.G Mechanism And Accessories Service Manual

55A-3
EXTERIOR PROTECTION
Front bumper: Stripping - Rebuilding
55A
STRIPPING
I - STRIPPING PREPARATION OPERATION
aRemove the front bumper (see 55A, Exterior pro-
tection, Front bumper: Removal - Refitting, page
55A-1) .
II - STRIPPING OPERATION FOR PART
CONCERNED
aRemove the front fog lights (depending on equip-
ment level) (see Front fog light: Removal - Refit-
ting) (MR 411, 80B, Headlights).
aNote the position of the electrical wiring (depending
on equipment level).
aRemove the electrical wiring (depending on equip-
ment level).
aRemove the bolts (1) .
aUnclip the badge.aUnclip the centre absorber (2) .
aDrill out rivets (3) .
aRemove the lower cover.
120886
120888
120887

55A-4
EXTERIOR PROTECTION
Front bumper: Stripping - Rebuilding
55A
aUnclip the lower absorber (4) .
aRemove the plastic welds (5) from the radiator grille.
aRemove the radiator grille.
aRemove the plastic welds (6) from the lower grille.
aRemove the lower grille.aRemove the clips (7) .
aUnclip:
-the lower trim strip,
-the fog light supports (8) .
REBUILDING
I - REBUILDING OPERATION FOR PART
CONCERNED
aClip on the fog light supports (8) .
aPosition the lower trim strip.
aDrill a hole at the position of each of the clips (7)
using a ∅∅ ∅ ∅
4.5 mm drill bit.
aRivet the lower trim.
aPosition:
-the lower grille,
-the radiator grille.
aClip the lower grille and the radiator grille onto the
tabs provided using the clips (part no.: 77 03 076
037).
aClip on the lower absorber (4) .
aPosition the lower cover.
120888
120889120890
Note:
Removing the lower trim strip requires the lower
tr im and the lower absorber to be removed.

55A-5
EXTERIOR PROTECTION
Front bumper: Stripping - Rebuilding
55A
aInsert rivets into the lower cover at (3) .
aClip on:
-the central absorber (2) ,
-the badge.
aRefit:
-the bolts (1) ,
-the electrical wiring (depending on equipment le-
vel),
-the front fog lights (depending on the equipment le-
vel) (see Front fog light: Removal - Refitting)
(MR 411, 80B, Headlights).
II - FINAL OPERATION.
aRefit the front bumper (see 55A, Exterior protec-
tion, Front bumper: Removal - Refitting, page
55A-1) .

55A-6
EXTERIOR PROTECTION
Front bumper: Stripping - Rebuilding
C44, and EQUIPMENT LEVEL SPORT
55A
STRIPPING
I - STRIPPING PREPARATION OPERATION
aRemove the front bumper (see 55A, Exterior pro-
tection, Front bumper: Removal - Refitting, page
55A-1) .
II - STRIPPING OPERATION FOR PART
CONCERNED
aRemove the front fog lights (see Front fog light:
Removal - Refitting) (80B, Headlights).
aRemove the bolts (1) .
aUnclip the badge.aUnclip the centre absorber (2) .
120886
132040

55A-7
EXTERIOR PROTECTION
Front bumper: Stripping - Rebuilding
C44, and EQUIPMENT LEVEL SPORT
55A
aDrill out the rivets (3) .aUnclip the lower absorber (4) .
aRemove the diffuser.
aCut the plastic welds of the radiator grille (5) and of
the lower grille (6) .
aRemove the radiator grille and the lower grille.
120887
132035132034
132038

55A-8
EXTERIOR PROTECTION
Front bumper: Stripping - Rebuilding
C44, and EQUIPMENT LEVEL SPORT
55A
aCut the clips (7) .
aUnclip the aerodynamic component.
aUnclip the « front side extender - front extender - fog
light support » assembly (8) .aDetach the decorative strip (9) .
REBUILDING
I - REBUILDING PREPARATION OPERATION
aClean the bonding areas using a LINT-FREE
CLOTH soaked in HEPTANE (see Vehicle: Parts
and consumables for the repair) (04B, Consuma-
bles - Products) by pressing firmly and moving
slowly from back to front and in one direction only.
aWipe the bonding areas with a clean, dry LINT-
FREE CLOTH in one direction only.
132039
132037132036
Note:
Chec k for any stains on the clean and dry lint-
free cloth. If any traces of stains are found,
resume the cleaning procedure.

55A-9
EXTERIOR PROTECTION
Front bumper: Stripping - Rebuilding
C44, and EQUIPMENT LEVEL SPORT
55A
II - REBUILDING OPERATION FOR PART
CONCERNED
aPlace the decorative strip to be bonded on the front
bumper and centre it visually.
aStick the decorative strip down taking care to keep it
properly aligned.
aClip:
-the « front side extender - front extender - fog light
support » assembly,
-the aerodynamic component.
aDrill a hole at each clip position (7) using a ∅ 4.5 mm
drill bit.
aRivet the aerodynamic component.
aClip the lower grille and the radiator grille onto the
tabs provided using the clips (part no.: 77 03 076
037).
aRefit the diffuser.
aClip on the lower absorber (4) .
aRefit new rivets.
aClip:
-the central absorber (2) ,
-the badge.
aRefit the front fog lights (see Front fog light: Remo-
val - Refitting) (80B, Headlights).
III - FINAL OPERATION.
aRefit the front bumper (see 55A, Exterior protec-
tion, Front bumper: Removal - Refitting, page
55A-1) .

55A-10
EXTERIOR PROTECTION
Rear bumper: Removal - Refitting
55A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
aRemove the rear lights (see Rear wing light: Re-
moval - Refitting) (81A, Rear lighting).
aUnclip the side extenders of the rear bumper (1)
using a flat-blade screwdriver.II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the bolts (2) .
aRemove the bolts (3) . EQ UIPMENT LEVEL SPORT
132041
119260
119255

55A-11
EXTERIOR PROTECTION
Rear bumper: Removal - Refitting
55A
aRemove the bolts (4) .aRemove the bolts (6) .
aUnclip the rear bumper at (5) .
aRemove the rear bumper at (6) (this operation requi-
res two people).
aDisconnect the number plate light connector. EQUIPMENT LEVEL EA0 or EQUIPMENT LEVEL
EA1 or EQUIPMENT LEVEL EA3 or EQUIPMENT
LEVEL EA5 or EQUIPMENT LEVEL EAG or EQUI-
PMENT LEVEL EZ2 or EQUIPMENT LEVEL EZ4
119259
EQUIPMENT LEVEL SPORT
132043
119254

55A-12
EXTERIOR PROTECTION
Rear bumper: Removal - Refitting
55A
aDisconnect the proximity sensor connector.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aConnect the proximity sensor connector.
aConnect the number plate light connector.
aRefit the rear bumper (this operation requires two
people).
II - FINAL OPERATION
aClip on the side extenders of the rear bumper in or-
der (7) , (8) , (9) , (10) , (11) .
aRefit the rear lights (see Rear wing light: Removal
- Refitting) (81A, Rear lighting).aCarry out a function test on all functions.
REAR PROXIMITY RADAR
REAR PROXIMITY RADAR
EQ UIPMENT LEVEL SPORT
132043