clock reset TOYOTA HILUX 2015 Owners Manual (in English)

1032. Instrument cluster
2
Instrument cluster
HILUX_OM_OM0K219E_(EE)
■The meters illuminate when
XVehicles with non-optitron type meters
The front position lights are turned on.
XVehicles with optitron type meters
The engine switch is in the “ON” position.
■ The odometer and trip meter display illuminate when
The engine switch is in the “ON” position.
■ The brightness of the instrument panel lights
When the headlight switch is turned to on, the brightness will be reduced
slightly unless the control dial is turned fully clockwise.
■ When disconnecting and reconnecting battery terminals
The trip meter data will be reset.
NOTICE
■To prevent damage to the engine and its components
● Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
● The engine may be overheating if the engine coolant temperature gauge is
in the red zone (H). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. ( →P. 482)
HILUX_OM_OM0K219E_(EE).book Page 103 Wednesday, May 14, 2014 3:06 PM

3585-5. Other interior features
HILUX_OM_OM0K219E_(EE)■
Circling calibration
If the direction display on the
compass flashes, circling cali-
bration needs to be performed.
Stop the vehicle in a place where it is safe to drive in a circle.
Press and hold the “INFO.”
or “DISP” button until a num-
ber (1 to 15) appears on the
clock, and press the
“RESET” button.
“- N -” appears on the direction
display.
Drive the vehicle at 8 km/h (5
mph) or less in a circle until a
direction is displayed.
If there is not enough space to
drive in a circle, drive around the
block until a direction is dis-
played.
1
2
3
HILUX_OM_OM0K219E_(EE).book Page 358 Wednesday, May 14, 2014 3:06 PM