CADILLAC XLR 2009 1.G Owners Manual

Map Appearance
This menu allows you to set the map appearance screen
options. The current setting appears as light blue.
2D:Select to display the map as a two-dimensional view.
3D:Select to display the map as a
three-dimensional view.Set 3D Viewing Angle:This feature allows you
to adjust the 3D viewing angle. To do so:
1. Touch 3D on the MAP APPEARANCE menu.
2. Touch Set 3D Viewing Angle.
The map screen with the 3D viewing angle bar
displays.
3. Touch the up or down arrows to set the viewing
angle.
4. Touch Return to save the settings and to exit this
menu or touch Reset to restore the viewing angle
to the default setting.
4-17

Voice Guidance Volume Settings
This feature allows you to set the voice prompt volume
level or to turn voice prompts on or off.
Set the voice prompt volume level by touching the
numbered buttons to increase or decrease the volume
level. You may also choose to turn the voice prompts off.
Then touch Return to save the setting and to return to
the SETUP MENU.
If a voice prompt is active while the audio system is on,
the audio system volume decreases and the voice
prompts are heard through the driver side front speaker.
Voice prompts are not heard while using voice
recognition.
Plan Route
To plan a route, press the ROUTE key. The PLAN
ROUTE menu displays.
One of several destination entry methods can be used
to plan a route. SeeEnter Destination on page 4-27
for more information.
4-18

Edit Memory Point
This feature allows you to store, delete, and edit
memory points. Touch the Edit Memory Point screen
button from the PLAN ROUTE menu to access the EDIT
MEMORY POINT screen.
Memory points can be stored in four different categories:
personal, business, entertainment, and marked point.
Memory points are stored when either START or MARK
are selected when setting a destination on the map
or when storing destinations in memory.A total of 60 locations can be stored. The last
10 destinations entered are stored under Previous
Destination. In addition, one memory point can be stored
under the Home category.
If all 60 stored points are entered, the system noties
you that there is no available storage left in memory
points. A memory point must be removed before storing
additional memory points.
Registering Memory Points
To store a memory point:
1. Select a category from the EDIT MEMORY
POINT menu.
2. Touch REGISTER.
3. Select a method for entering a destination. A map
appears displaying the memory point’s location.
4. If available, touch INFO to view the address
information for the memory point.
5. Touch Enter to store the point.
4-19

Editing Memory Points
This feature allows you to edit the contents stored in
memory. The following options are available:
Icon Editing of a Memory Point
Each memory point is displayed with a default icon.
To edit an icon:
1. Select the category of the memory point.
2. Select the item to be edited.
3. Touch the icon. The EDIT MEMORY POINT icon
screen appears.
4. Touch the icon you would like to use. The system
then returns to the EDIT MEMORY POINT menu.
5. Touch Return to go back to the previous screen.
The new memory point icon displays on the map.
Choose from 18 different icons, three of which are sound
icons. The same icon may be used for other memory
points as well.
Name Editing of a Memory Point
To modify the name of a stored memory point:
1. Select the category of the memory point.
2. Select the item to be edited.
3. Touch the NAME screen button and use the alpha
keypad to edit the name. Names may contain up to
15 alpha and/or numeric characters.
4. Touch Return to go to the previous screen.
Moving Memory Points
To move a memory point from one category to another:
1. Select the category of the memory point.
2. Select the memory point to be edited.
3. Touch CATEGORY. A list of categories appear.
The current category for the item will be highlighted
and cannot be selected.
4. Touch the screen button for the category you want
the memory point placed in. A pop-up window
appears displaying the change in category.
5. Touch Return to go back to the previous screen.
4-20

Adjusting a Memory Point
To relocate a memory point’s location:
1. Select the category of the memory point.
2. Select the memory point to be edited.
3. Touch POSITION. A map screen with the position
of this memory point appears.
4. Touch anywhere on the screen to activate the scroll
feature and relocate the memory point. SeeMaps
on page 4-38.
5. Touch Enter to save the memory point’s new
location.
6. Touch Return to go back to the previous screen.
Changing the Phone Number of a
Memory Point
To edit or add the phone number of a memory point:
1. Select the category of the memory point.
2. Select the memory point to be edited.
3. Touch PHONE and use the numeric keypad to edit
or add the number.
4. Touch the RETURN button to take you back to the
previous screen when nished.
Deleting Single Memory Points
To delete a single memory point:
1. Press the ROUTE key.
2. Touch EDIT MEMORY POINT.
3. Select the category of the memory point.
4. Touch DELETE.
5. Select the memory point to be deleted.
A conrmation window appears.
6. Touch YES to delete the memory point or NO to
return to the previous menu.
7. Touch Return to go back to the previous screen.
Deleting All Memory Points
To delete all of the memory points in a category:
1. Press the ROUTE key.
2. Touch EDIT MEMORY POINT.
3. Select the desired category.
4. Touch the DELETE ALL screen button.
A conrmation window appears.
5. Touch YES to delete the memory points or NO to
return to the previous menu.
6. Touch Return to go back to the previous screen.
4-21

Edit Category
To edit the name of a category:
1. Press the ROUTE key.
2. Touch EDIT MEMORY POINT.
3. Select the category to be edited.
4. Touch the EDIT CATEGORY screen button and
use the alpha keypad to edit the category name.
The name can consist of up to 15 alpha and/or
numeric characters.
5. Touch Return to go back to the previous screen.
Marked Point
A marked point is a memory point which has been stored
by selecting the MARK screen button while traveling on a
planned route. The scroll feature can also be used to plan
a destination on the map after reaching the destination, or
by moving a memory point to a marked point category.
See “Editing Memory Points” earlier in this section for
more information.
Previous Destination Memory
Each time Start is selected from the map screen,
that destination is stored as a memory point under
PREVIOUS DESTINATION. This category stores
up to 10 destinations.
When the Previous Destination category contains more
than 10 destinations, the system removes the oldest
destination stored and adds the most recent one
selected to the list.
So that a previous destination is not lost, move the
destination into a memory point category. See “Moving
Memory Points” earlier in this section for more
information.
Home Memory
This memory point is stored by selecting Home from
the EDIT MEMORY POINT screen. See “Registering
Memory Points” earlier in this section and “Home” under
Enter Destination on page 4-27for more information.
4-22

Edit Waypoint
Waypoints are destinations you can set along the way
to your nal destination. This feature allows you to
add, edit, and delete waypoints.
Five waypoints can be set up on the way to the nal
destination.
To access the WAYPOINT menu:
1. Press the ROUTE key.
2. Touch Edit Waypoint.
Adding a Waypoint
To add a waypoint to the route:
1. Touch Add Waypoint.
2. Enter a destination. SeeEnter Destination on
page 4-27.
A map appears showing the location of the
waypoint.
3. Touch Enter to add the waypoint.
4. Touch the ADD screen button to insert the waypoint
in the desired order.
5. The system displays the ROUTE INFORMATION
screen. From this screen, several options are
available.
4-23

List:Touch to view the waypoint on the map or to
change the order of the waypoints and nal destination.
To change the order, touch CHG ORDER, then touch
the blank screen button next to the destination to select
the order of the waypoints and nal destination. Press
the MAP key to view the destination and waypoints
on the map screen.Delete:Touch to delete a waypoint or the nal
destination. A conrmation window appears. Touch YES
to delete the point or NO to return to the previous screen.
Delete All:Touch to delete all of the waypoints and the
nal destination. A conrmation window appears.
Touch YES to delete all waypoints or NO to return to
the previous screen.
Change:Touch Change to change the nal destination.
Enter a destination. SeeEnter Destination on page 4-27.
Add:Touch to add additional waypoints. Refer to the
steps for adding a waypoint listed previously in this
section.
Calculate:Touch to begin route calculation.
This feature is only available if the nal destination
has been set.
4-24

Editing a Waypoint
This feature allows editing of waypoints that have
already been set. To edit a waypoint:
1. Touch Edit Waypoint.
2. Touch the MAP key to view the destination location
on the map screen.
3. Touch CHANGE ORDER to change the order of the
waypoints and the nal destination.
The map scroll can be used to change a waypoint
from one location to another.
Deleting a Waypoint
To delete a waypoint from the route:
1. Touch Delete Waypoint.
2. Select the waypoint to be deleted. A conrmation
window appears.
3. Touch YES to delete the waypoint or NO to return
to the previous menu.
Edit Avoid Point/Area
From this menu you can register, edit, and delete an
area to be avoided while planning a route. These areas
can also be saved so the system can automatically
avoid them when planning a route.
To access the AVOID POINT/AREA menu:
1. Press the ROUTE key.
2. Touch Edit Avoid Point/Area.
4-25

Registering an Avoid Point/Area
To store an avoid point/area:
1. Touch Register Avoid Point/Area.
2. Enter a location. SeeEnter Destination on
page 4-27.
3. If desired, reduce or enlarge the area around the
point you want to avoid by using the REDUCE or
ENLARGE screen buttons.
If an avoid point cannot be avoided, the system
displays “Avoid Point and Area Stored. Route May
Not Avoid the Avoid Point and Areas.”
4. Touch Enter to set the area as an avoid point area.
When using the REDUCE or ENLARGE buttons, a
box appears to represent the area or an X appears
to represent the area avoided. When an avoid
point is set, the square will appear as green.
5. Touch Return to go back to the previous screen.
Editing an Avoid Point/Area
To edit an avoid point/area:
1. Touch Edit Avoid Point/Area. A list of avoided
points appear.
2. Select the avoided point/area you want to change.
A map of the avoided area appears.
3. Use REDUCE or ENLARGE to edit the avoided
point.
4. Touch Enter to set your new avoided area.
The system displays “Area Adjusted.”
5. Touch Return to go back to the previous screen.
Deleting an Avoid Point/Area
To delete an avoid point/area:
1. Touch Delete Avoid Point/Area. A list of avoided
points appear.
2. Select the avoided point/area to be deleted.
3. The system will ask to conrm the selection.
Touch Yes to delete the avoid point/area or
No to cancel.
If Yes is selected, the area will no longer be
avoided when traveling on a planned route.
4. Touch Return to go back to the previous screen.
4-26