JAGUAR XFR 2010 1.G Workshop Manual
Page 3021 of 3039
Page 3022 of 3039
1. CAUTION: Only tighten the bolts finger-tight at this stage.
2. CAUTION: Tighten the bolts in the sequence shown.
Torque:
Bolt 1 63 Nm Bolt 2 63 Nm Bolt 1 63 Nm
3. Torque: 12 Nm www.JagDocs.com
Page 3023 of 3039
5.
6. Install the special tool to the front subframe.
Special Tool(s): 502-005
Page 3024 of 3039
8. Torque:
Stage 1:80
9. Remove the special tool.
Special Tool(s): 502-005 Nm
240°
Stage 2:
Page 3025 of 3039
10. Remove the special tool.
Special Tool(s): 502-005
11.
Torque:
Stage 1: 100 Nm Stage 2: 270°
12. CAUTION:
Make sure each bolt aligns with the removal markings.
Torque: 175 Nm
Page 3026 of 3039
13. CAUTION:
Make sure each bolt aligns with the removal markings.
Torque: 175 Nm
14.
15.
NOTE: Repeat the step for the other side.
Torque: 175 Nm
Torque: 43 Nm
Page 3027 of 3039
17.
Torque: 100 Nm
18. Torque: 45 Nm www.JagDocs.com
Page 3028 of 3039
Torque: 5 Nm
Page 3029 of 3039
Page 3030 of 3039
24.
25.
CAUTION:
Make sure to protect the paintwork.
Special Tool(s): 303-1436 Special Tool(s): 303-021