LEXUS LS430 2003 Factory Repair Manual

Fig. 126: Installing 3 bezel clips to position indicator housing upper
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
41.INSTALL SHIFT LOCK RELEASE BUTTON
a. Install the shift lock release button and spring to the floor shift assy.
HINT:
Securely engage the claws.
Fig. 127: Installing Shift Lock Release Button And Spring To Floor Shift Assy

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
42.INSTALL INDICATOR LAMP WIRE SUB-ASSY
a. Securely connect the 2 terminals of the indicator lamp wire harness to the transmission control
switch connector.
b. Install the position indicator lamp bulb to the indicator lamp wire sub-assy.
c. Install the position indicator bulb cap to the position indicator lamp bulb.

Fig. 128: Connecting 2 Terminals Of Indicator Lamp Wire Harness
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Install the indicator lamp wire to the position indicator lens.

Fig. 129: Installing Indicator Lamp Wire To Position Indicator Lens
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
43. Connect the indicator lamp wire connector to the floor shift ass
y.

Fig. 130: Connecting Indicator Lamp Wire Connector To Floor Shift Assy
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
44.INSTALL POSITION INDICATOR LENS
a. Install the position indicator lens to the position indicator housing upper.
HINT:
Securely engage the claws.

Fig. 131: Installing Position Indicator Lens To Position Indicator Housing Upper
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
45.INSTALL POSITION INDICATOR HOUSING UPPER
a. Install the position indicator housing upper to the shift lever guide housing.
HINT:
Securely engage the claws.

Fig. 132: Installing Position Indicator Housing Upper To Shift Lever Guide Housing
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
46.INSTALL SHIFT LOCK RELEASE BUTTON COVER
a. Install the shift lock release button cover to the position indicator housing upper.
47.INSTALL SHIFT LEVER KNOB SUB-ASSY
a. Install the shift lever knob sub-assy to the floor shift lever assy.

Fig. 133: Installing Shift Lever Knob Sub-Assy To Floor Shift Lever Assy
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
48.INSTALL INDOOR ELECTRICAL KEY OSCILLATOR (W/ SMART KEY)
a. Install the indoor electrical key oscillator to the shift lever plate with the 2 screws.
49.INSTALL FLOOR SHIFT ASSY
a. Install the floor shift assy with the 4 bolts.
Torque: 8.3 N.m (85 kgf.cm, 74 in.lbf)
b. Connect the connector to the floor shift assy.

Fig. 134: Installing Floor Shift Assy With 4 Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
50.INSTALL FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSY
a. Install the floor shift gear shifting rod sub-assy with the nut.
Torque: 13 N.m (130 kgf.cm, 9 ft.lbf)

Fig. 135: Installing Floor Shift Gear Shifting Rod Sub-Assy With Nut
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
51.CONNECT BATTERY NEGATIVE TERMINAL
52.ADJUST SHIFT LEVER POSITION (SEE ADJUSTMENT
)
53.INSPECT SHIFT LEVER POSITION (SEE ADJUSTMENT
)
54.PERFORM INITIALIZATION (SEE INITIALIZATION
)
ADJUSTMENT
1.INSPECT SHIFT LEVER POSITION
a. When shifting from the P to R position with the ignition switch on and brake pedal depressed, make
sure that the shift lever moves smoothly and moves correctly into position.
b. Start the engine and make sure that the vehicle moves forward when shifting from the N to D
position and moves rearward when shifting to the R position.
If operation cannot be done as specified, inspect the park/neutral position switch assy and check the shift
lever assy installation condition.
2.ADJUST SHIFT LEVER POSITION
a. Remove the nut and disconnect the shiftin
g rod from the connecting rod swivel.