heating NISSAN TEANA 2014 Repair Manual

IN-CABIN MICROFILTERVTL-5
< SYSTEM DESCRIPTION >
C
D E
F
G H
J
K L
M A
B
VTL
N
O P
SYSTEM DESCRIPTION
IN-CABIN MICROFILTER
DescriptionINFOID:0000000009461575
FUNCTION
The fresh air (A) and the recirculated air (B) drawn inside the pas-
senger compartment by the blower fan (1) is kept clean (C) on either
mode by the in-cabin microfilter (2 ), which is located before the
evaporator (3), in the heating and cooling unit assembly.
WJIA2253E
Revision: November 20132014 Altima NAM

DUCTS AND GRILLESVTL-7
< REMOVAL AND INSTALLATION >
C
D E
F
G H
J
K L
M A
B
VTL
N
O P
DEFROSTER NOZZLE
DEFROSTER NOZZLE : Removal and InstallationINFOID:0000000009461577
REMOVAL
1. Remove the side defroster ducts (LH/RH). Refer to VTL-7, "SIDE DEFROSTER DUCT : Removal and
Installation".
2. Remove the defroster nozzle screws (A).
3. Release the defroster nozzle pawls. : Pawl
4. Remove the defroster nozzle (1).
INSTALLATION
Installation is in the reverse order of removal.
CENTER VENTILATOR DUCT
CENTER VENTILATOR DUCT : Removal and InstallationINFOID:0000000009461578
REMOVAL
1. Remove the instrument panel assembly. Refer to IP-15, "Removal and Installation".
2. Remove the center ventilator duct screws (A).
3. Remove the center ventilator duct.
INSTALLATION
Installation is in the reverse order of removal.
SIDE DEFROSTER DUCT
SIDE DEFROSTER DUCT : Re moval and InstallationINFOID:0000000009461579
REMOVAL
1. Remove the center ventilator duct. Refer to VTL-7, "CENTER VENTILATOR DUCT : Removal and Instal-
lation".
1. Defroster nozzle 2. Side defroster duct (LH) 3. Center ventilator duct
4. Heating and cooling unit assembly 5. Front floor connecting duct (LH) 6. Front floor duct (LH)
7. Front floor duct nozzle (LH) 8. Rear center ventilator duct 9. Front floor duct nozzle (RH)
10. Front floor duct (RH) 11. Adaptor extension duct 12. Adaptor duct
13. Front floor connecting duct (RH) 14. Side defroster duct (RH) Front
ALIIA0613ZZ
ALIIA0614ZZ
Revision: November 20132014 Altima NAM

BLOWER UNITVTL-13
< REMOVAL AND INSTALLATION >
C
D E
F
G H
J
K L
M A
B
VTL
N
O P
BLOWER UNIT
BLOWER UNIT
BLOWER UNIT : Exploded ViewINFOID:0000000009461591
BLOWER UNIT : Removal and InstallationINFOID:0000000009461592
REMOVAL
1. Remove the heating and cooling unit assembly. Refer to HA-41, "HEATING AND COOLING UNIT
ASSEMBLY : Removal and Installation".
2. Disconnect the harness connector (B) from the blower motor.
3. Remove the screws from the blower unit, then remove the blower unit from the heating and cooling unit assembly.
4. Remove the three blower motor screws (A), then remove the blower motor from the blower unit (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
BLOWER MOTOR
BLOWER MOTOR : Removal and InstallationINFOID:0000000009461593
REMOVAL
1. Remove the glove box assembly. Refer to IP-22, "Removal and Installation".
2. Disconnect the harness connector from the blower motor.
1. Blower unit 2. Heating and cooling unit Front
ALIIA0611ZZ
AWIIA1596ZZ
Revision: November 20132014 Altima NAM