ignition AUDI S8 2008 Service Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2008, Model line: S8, Model: AUDI S8 2008Pages: 404, PDF Size: 52.7 MB
Page 80 of 404

Clear vision
Make-up mirror
The vanity mirrors in the sun visors are equipped with lids . When the
lid is opened
G) , the mirror light in the rooflining turns on automatÂ
ically. It turns off when the lid is closed and the visor is folded up
again.
Two-part vanity mirror*
The vanity mirrors in the sun visors are in two parts => page 77,
fig. 70 . When the
lid @ is slid open, a normal magnifying mirror is
available and when the
lid © is slid open , a mirror with high-power
magnification is available. In addition, when one of the lids is
opened, the mirror light in the rooflining turns on automatically . It
turns off when the lid is closed and the visor is folded up again. •
Applies to veh icles: with sun shade
Sun Shade
The rear window is equipped with a sun shade.
-
Fig. 71 Cockpit :
Switch for sun shade
' '
Fig. 72 Rear rooflining
Switch for sun shade
The sunshade can be operated with the switch 1~•-, 1 in the
driver's area and in the rear.
Instrument panel switch
-Press the l::!:1 switch to extend or retract the electric
sunshade for the rear
window=> fig. 71.
Rear switch
- Press the l..t.l switch to extend or retract the electric
sunshade for the rear
window=> fig. 72.
After the sun shade for the rear window has reached either of its end
positions, it turns off automatically.
Briefly press the switch a second time to reverse the movement of
the sun shade before it reaches its end position. If the ignition is
turned off while the shade is still moving, the shade will continue
until it reaches the end position before turning off.
[ i ] Tips
• If the sun shade is operated repeatedly within a short time, the
built-in overload protection circuit may be tripped. If this occurs,
you will have to wait briefly before you can operate the shade again.
• Because of the decrease in the flexibility of the shade material at
temperatures below freezing, the electrical circuit which operates .,_
Page 82 of 404

Clear vision
Fig. 75 Left rear roofÂ
lining: Vanity mirror
folded down
-To fold down, tap the rear edge of the mirror as indicated
by
arrow~ page 79, fig. 74.
As the mirror folds down, it automatically il lumina tes.•
Wiper and washer system
Windshield wiper ~
The windshield wiper lever controls both the windshield
wipers and the washer system.
Fig. 76 Windshield
wiper lever
The windshield wiper lever~ fig. 76 has the following posi Â
tions:
One-touch wiping
-Move the lever to position G) , when you want to wipe the
windshield
briefly.
Intermittent wiping <:S;)l (activating rain sensor)
-Move the lever up to position ®·
-Move switch © up or down, to adjust the sensitivity of
the rain sensor.
Low wiper speed
-Move the lever up to position G).
High wiper speed
-Move the lever up to position @.
Automatic wiper/washer
-Pull the lever to position© (toward the steering wheel)
and hold.
-Release the lever. The washer stops and the wipers keep
going for about four seconds.
Turning off the wipers
-Move the lever back to position @.
The windshield wipers and washer only work when the ignition is
turned on.
The rain sensor is only activated with the wiper leve r set to position
G) . When it starts to rain, the rain sensor will automatically activate
the intermittent wiping mode.
To reduce the sensitivity of the sensor, move switch
@ down. To
increase the sensitivity, move the switch up. The higher you adjust
the sensitivity, the faster the sensor will react when it senses mois-
.,_
Page 83 of 404

ture on the windshield. The rain sensor wiper intervals depend on
t he sensitivi ty setting as well as vehic le speed . Dur ing brief s tops,
wiper motion wil l adjust in re lation to the amount of rain on the
windshield .
During br ief stops, e.g. at a red light, wiper mot ion wil l auto mati Â
ca lly be reduced to the next lower speed . Wipers a lready turning at
low speed. change to i nterm ittent w ip ing.
When the ignition is turned on, the washer jets are heated .
With the low beam headlights switched on, p ull the wiper lever
towards you only briefly to clean the windshield. Ho ld ing the w iper
lever wou ld a lso engage the headlight washer system each time you
clean the w inds hie ld and wou ld dra in t he washer flu id reservoir
pr ematurely .
& WARNING
• Wiper bl ade s are cruc ial for safe driving! Only when they are in
good condition are they able to clear the window s properly to
provide uncompromising visibilit y. Worn or damaged wiper blades
are a safety hazard
::::> page 82 , "In stalling new wiper blade s"!
• The rain sensor is only designed to a ssist and support the
driver . It r em ains entirely th e driver' s respon sibility to monitor
outside weather condit ions and to manually activate the wipers as
s oon a s rain or drizzle reduces visibility through the windshield.
• The windshield mu st not be treated with water-repellent mate Â
rials . They c an in crea se gl are under poor visibility condition s such
as wetness , darkness , or when the sun is low on the horizon. In
addition , they can cau se the wind shield wipers to chatter.
0 Note
In free zing or near freezing conditions:
• Always check that the wiper b lades are not frozen to the glass
be fore you turn the w ipe rs on. Loosen a wiper b lade w hich is frozen
Controls and equip ment
Clea r vision
in place before operating the wipers to prevent damage to the wiper
bl ade or the wiper motor.
• Do not use the wipers to clear a frosted window. Using the
wipers as a conve nien t ice scraper will des troy the wiper blades .
• Before you take your vehic le to an automatic car wash, make sure
you have the w inds hield w iper system switched o ff (lever in p osition
O), otherwise the windshield wiper system could get damaged in the
car was h if it should suddenly come o n.
[ i ] Tips
• Make sure the washer flu id reservo ir in the engine compartmen t
is topped off before going on a long trip . Look
up:::> page 323 for
check ing and f illing the washer conta iner.
• I f you sw itch off the ignition with the windshield wiper lever st ill
in the inte rval wi pe pos ition and t hen com e back a wh ile la ter a nd
drive off, the rain sensor wil l reactivate itself after the vehicle speed
has e xceeded 4 mph (6 km/h) .
• Worn or dirty windshie ld wiper b lades cause smearing which
ca n affect t he opera tion of the ra in senso r. Check the condi tion of
your windshield wiper b lades regu lar ly . •
Headlight washer system
The he adlight washer sy stem cle ans the he adlig h ts.
-Oper ate the win dshiel d w ip er/was her sy stem G) wit h th e
hea dlights t urned o n by ho ld ing th e l ever fo r lo nge r than
on e seco nd ::::.,
page 80, fig. 76.
The washe r jets extend f orward out of the fron t bumper dr iven by
water pressure to spray the front head lights with water .
You should inspect the head lights regu lar ly (for examp le when refu -
e ling) a nd c lean o ff any sol id dirt or i nsects from the lenses.
~
Page 85 of 404

Rem oving a wip er blade
- Bring the windshield wipers to the service pos ition
=> page 82 .
- Lift the wiper arm away from t he windshield.
- Pu sh t he locking piece on the wiper blade in the direction
of the
arrow @=> page 82, fig. 78. Hold the wiper b lade
firmly .
- Remove the wiper b lade @.
Inst allin g wip er bl ad e
- Place the new wiper blade in the retainer on the wiper
arm ©=> page 82, fig. 79.
- Pu sh t he locking piece on the w iper blade in the direction
of the
arrow @ until you feel it click into place on the
wiper arm .
Clean your wiper b lades regularly with a windshield washer solution
to prevent streaking . If the bla des are very dir ty, for example with
insects, carefully clean the b lades with a sponge or a soft brush .
I f the wiper b lades begin to s treak the windshie ld, t his could be
caused by residue left on the windshield by automatic car washes.
Fil l the windshield washer container with a special solution avail Â
able at your authorized Audi dealer to remove the residue .
& WARNING
Be sure t o in spe ct the condition of you r w iper bl ade s regul arly . S ee
your auth orized Audi de aler for repla ceme nt bl ade s.
0 Note
To prevent damage to the wiper system :
Controls and equipÂ
ment
Clea r vision
• Always loosen blades which are frozen to the windshield before
operating wipers.
• Do not use gaso line, kerosene, paint thinner, or other solvents on
or near t he wiper blades .
• Do not attempt to move the wipers by hand .
[ i] Tip s
Commercial hot waxes app lied by automatic car washes affect the
c leanabi lity of the windshield .•
Mirrors
Rear view mirror
When the ignition is on, the interior m irror w ill darken automatically
depending on the amount of light striking the mirror (suc h as headÂ
lights shining into the vehic le from the rear!. The mi rror wi ll retu rn
to the origina l state (anti -glare off) when you move the manual gearÂ
shift/gear selector lever into
Re verse or when you turn on the inte Â
rior lights.
[ i ] Tips
The automa tic an ti-g lare feature on the m irror wil l not operate propÂ
e rly if the light shining on the inside mirror is b locked by other
objects. •
Page 86 of 404

Clear vision
Outside mirrors
The ou tside mirrors are electrically adjusted.
Adjusting the outside mirrors
Fig . 8 0 F orw ard
s e ction of drive r's
a rmre st: powe r m irror
c ontr ols
Turn the adjusti ng knob to position ©~ fig. 80 to adjust
t h e ou ts ide mir ror on t he d river's side .
- Tu rn the knob to posi tion
@ to adjust the outs ide m irror
on the passenger side.
- Press th e kno b in the appropr iate direct io n to move the
m irror surface so t hat you have a good view to the rear.
Folding both outside mirrors in flush
- T urn t he knob
to @ .
The mirror surfaces a re heated whenever you switch on the rear
window defogger in response to the outside temperature .
We recommend folding the outside mirro rs flat t o help when
parking your vehicle or when maneuvering in very tight spaces .
Tilting the passenger's side out side mirror
When you move the se lector lever into R (Reverse), the mirror on the
front passenge r's doo r (knob turned
to @ => fig. 80) w ill til t slight ly downward
. This make is easier for you to see the curb when you are
b acking in to a parking space.
T he mirror returns to its ini tial position as soon as reverse gear is
disengaged and vehicle speed is above about 9 mph (15 km/h). The
m irror also returns to its initia l position if the switch is moved to the
driver's outside mirror
(0 or Neutral @.
Memory setting for the outside mirrors
When the seat posi tion is saved in memory, the position of the
outside mirrors is saved at the same time
=> page 94 .
Automatic anti -glare for the outside mirrors
T he outside mi rrors dim at the same time as the inside mirror . When
t h e ignition is switched on, the mir rors au tomatical ly dim
depending on the amount of light strik ing the mirrors (such as headÂ
l ights shining into the vehicle from the rear).
When you turn on the interior l ight, or when y ou mo ve the se lect or
l ever into
R (Reverse), the anti -g lare function stops and the mirrors
r eturn to their original condi tion (n ot dar ken ed).
0 Note
• Curve d (i. e . convex) mirror sur faces increase your field of view.
Remember that vehic les or other objects w il l appear smaller and
farther away than when seen in a fla t mi rror . If you use this mirror to
estimate distances of fol lowing vehicles when changing lanes, you
cou ld estimate incorrectly and cause an accident .
• I f the mirror housing is moved unintentional ly (for example,
while park ing your vehicle), then you must fi rst fo ld the mirror elec Â
trically . Do not readjust the mirror housing manually. You could
damage the motor which controls the mirro r.
[ i ] Tips
• I f there should be a malfunction in the elect rical system, you can
st ill adjust the outside m irrors by pressing the edge of t he mirror .
~
Page 90 of 404

Seats and storage
& WARNING
• Never adjust the driver's or front passenger's seat while the
vehicle is moving. If you do this while the vehicle is moving, you
will be out of position . Always adjust the driver's or front
passenger's seat when the vehicle is not moving .
• Be careful when adjusting the seat height . Check to see that no
one is in the way, or serious injury could result!
• Because the seats can be electrically adjusted with the ignition
key removed, never leave children unattended in the vehicle. UnsuÂ
pervised use of the electric seat adjustments may cause serious
injury. •
Upper thigh support
The adjustable upper thigh support provides optimal
support for the upper thigh when driving .
Fig. 82 Power seat :
Switch for upper thigh
support
- To extend the upper thigh support, push the switch
forward.
- To make the upper thigh support shorter, push the switch
to the rear.
& WARNING
Never adjust the seat cushion while the vehicle is moving . If you
adjust your seat while the vehicle is moving, you are out of posiÂ
tion. Always adjust the seat cushion when the vehicle is not moving. •
Seat adjustment
Fig. 83 Power seat:
Switch for seat adjustÂ
ment
Moving the seat forward and backward G)
- Press the switch forward or backward horizontally =>& .
Adjusting the seat height 0 and G) together
-Pull the switch evenly at both ends to raise the seat =>& .
-Push the switch evenly at both ends to lower the seat
=>& .
Angling the seat cushion up and down 0 or G)
-To angle the seat cushion up, pull the switch at the front
only=> &.
-Alternatively, push the switch at the rear only =>& . .,,_
Page 91 of 404

-To angle the seat cushion down, push the switch at the
front
only~ ,&.
Alternatively, pull the switch at the rear only~ ,&.
& WARNING
• Never adjust the driver's or front passenger's seat while the
vehicle is moving . If you do this while the vehicle is moving, you
will be out of position . Always adjust the driver's or front
passenger's seat when the vehicle is not moving.
• Be careful when adjusting the seat height . Check to see that no
one is in the way, or serious injury could result!
• Because the seats can be electrically adjusted with the ignition
key removed, never leave children unattended in the vehicle. UnsuÂ
pervised use of the electric seat adjustments may cause serious
injury. •
Applies t o vehicles: with massage funct ion
Massage function
0 0
.. .. ······-t
Fig . 84 Power seat:
Massage function
-Press the switch to turn on the massage function.
The massage function runs for about 10 minutes. The passenger's
back is massaged by continuous adjustment of the lumbar support.
Contro ls a nd eq uipÂ
ment
Seats and storage
The curvature of the lumbar support can also be adjusted during the
Massage to make it more or less aggressive. This varies the intensity
of the
Massage to the level desired by the occupant .
Once the massage function stops after about 10 minutes, the
lumbar support automatically returns to the position in which it was
last set.
[ i] Tips
The massage function can be interrupted at any time by pressing
the switch. The lumbar support remains in its current position. •
Adjusting the seatback
-:_____ ·----· ... ___ ..._._ ..
Vehicle care I I
Fig. 85 Power seat:
Switch for seat back
angle
Fig. 86 Power seat:
Switch for adjusting
upper seatback section ...
Technical data
Page 99 of 404

Rear window shelf
You can place li gh t a rticles of cl othing on the re ar
window shelf behind the sea tbac k.
& WARNING
When driv ing , do not leave any hard objects on the rear w indow
s helf or allow your pet to sit on the shelf . They could be come a
hazard for vehicle oc cup ant s i n the event of sudden bra king or a
c rash .
[ i ] Tips
• A vent slot is located between t he shel f and the rear window . Do
not b lock the vent with any items you may place on the rear window
she lf.
• Do not place bulky items on the rear window shelf as they could
res trict or b lock the driver's vision in the rear view mirro r.•
Contro ls a nd eq uipÂ
ment
Seats and storage
Individual rear seats
Ap plies to ve hic les : with indi vid ual rea r seat s
Controls
The operating logic for the switches corresponds t o the
construction and function of the sea t.
Fig. 98 Co ntro ls fo r
individual rear seats
The switches to adjust the seats correspond to the layout, the
design and the function of the seat. The seats are adjusted by
moving the switches following this log ic .
@ Seat adjustment
© Massage function *
© Head restraint adjustment
@ Lumbar support
& WARNING
• Vehicle s with power individual rear se ats have seating for four .
The long center co nsole between the two rear se ats is not a
s eating po sition. Therefore , a safety belt i s not provided.
• The power adjustment for the individual seats al so works with
the ignition switched off or with the ignition key removed . For this
re as on , children should never be left unattended in the vehicle -
they could be injured!
.,
Vehicle care I I irechnical data
Page 100 of 404

Seats and storage
& WAR N IN G ( continued )
• Exercise caution when adjusting the seats . Unsupervised or
careless seat adjustment can p inch fingers or hands causing
injuries .•
App lies to veh icles: with indiv idual rear seats
Seat adjustment
Seat forward /back G)
Fig . 99 Individual rear
s eat s: Se at adju stmen t
-Push t he swi tch fo rward or bac k=> & .
Seat angle up /down ®
-P u sh the s witch up o r down =>& .
& WARNING
• Vehicles with power individual rear seats have seating for four .
The long center console between the two rear seats is not a seating position . Therefore, a safety belt is not provided .
• The power adjustment for the individual seats also works with
the ignition switched off or with the ignition key removed . For this
reason , children should never be left unattended in the vehicle •
they could be injured !
& WAR N ING (continued )
• Exercise caution when adjusting the seats. Unsupervised or
careless seat adju stment can pinch fingers or hands causing
injuries.
•
Appl ies to vehicles: w ith ind iv idual rear seats with massage function
Massage function
F ig . 100 Individ ual
rear s eats: Massage
function
Pr ess th e swi tch to tu rn on t he massag e functi on.
T he massage function runs for ab out 10 minutes . The pa ssenger's
bac k is massaged by continuous ad justment of the lumbar support.
T he curvature of the lumbar support can also be ad justed during the
Mas sag e to mak e it mo re or less aggr ess ive . T hi s va ries the in tens ity
of the
Massage to the level desired by the occupant.
O nce the mas sage func tion s tops after abou t 10 m inutes, the
l umbar support automatically returns to th e position in which it was
l a st set.
[ i ] Tips
T he mas sage function ca n be interrupted at any time by p re ssi ng
the switc h. T he lum bar support r emains i n its cu rr en t pos it io n.•
Page 110 of 404

___ S_ e
_ a_t_s _ a_n_ d
__ s _t _o _r _a ...::g:::.... e ________________________________________________ _
-Plu g in applian ce to be use d.
The socket of the ci gare tte l ighter may be used for 12-volt appli Â
ances with maximum consumption of up to 100 watts , such as a
flash light, small vacuum c leaner, etc .
Before you purchase any accessories , always read and fo llow the
in fo rm ati on in
~ page 382 , "Additiona l ac cess ories a nd parts
replacement".
& WARNING
Improper use of the cigarette lighter can cause ser ious injury or
start a fire .
• Be careful when using the cigarette lighter . If you do not pay
attention to what you are do ing when you are using the cigarette
lighter you can burn yourself .
• The cigarette lighter and socket remain functional even if the
ignition is switched off or the ignition key is removed. Never leave
c hildren inside the vehi cle without supervision.
0 Note
• To avoid damaging the s ocket , only use plugs tha t fit pr operly.
• Only use the cigarette lighter socket as a power source for elec Â
tr ical accesso ries for sh ort du rations. Use the sockets in the vehic le
when a power source is needed for longer durations .
[ i J Tips
When the engine is off and accessories are sti ll plugged in and are
on, the v ehicle battery ca n st ill be d raine d.•
Long center console
Ap plies to veh ic les : w ith lon g cen ter co nso le
Overview
Fig . 116 Long re ar
cen ter con sole
T here are three storage co mpartments in the long center console in
t he rear :
Left storage compartment
The le ft sto rage c om partm ent co ntain s two 12 -v o lt so ckets. The 12 -
volt sockets can be used for electrica l accessories. The power
co nsumption a t a sing le plug mus t no t exceed 100 watts .
Center storage compartment
Th e cen te r storag e compar tment is suitabl e fo r hol ding small items .
Right storage compartment
T he right storage co mpart ment is suita ble for hold ing smal l items.
& WARNING
T he socket plus any appliances plugged into it remain functional
even if the ignition is switched off or the ignition key is removed.
Never leave children in side the vehicle without supervision.
~