mirror BMW MOTORRAD G 650 XCHALLENGE 2007 Rider's Manual (in English)

Table of ContentsYou can also consult the index at
the end of this Rider's Manual if
you want to find a particular topic
or item of information.
1 General instructions . . . . . 5
Overview ...................... 6
Abbreviations and symbols . . . . 6
Air Damping System.......... 6
Equipment . . . . . ............... 7
Technical data . ............... 7
Currency ...................... 7
2 General views . . . . . . . . . . . . . 9
General view, left side . . . . . . . . 11
General view, right side . . . . . . 13
Underneath the seat......... 14
Handlebar fitting, left......... 15
Handlebar fitting, right . . . . . . . . 16
Instrument cluster . . .......... 17
Headlight ..................... 18
3 Status indicators . . . . . . . 19
Status indicators............. 20
Standard warnings . .......... 20
ABS warnings
OE
............. 234 Operation . . . . . . . . . . . . . . . . 27
Ignition switch and steering
lock . . . . . ..................... 28
Multifunction display......... 28
Lights . . . ..................... 31
Turn indicators . .............. 32
Emergency off switch (kill
switch) . . ..................... 32
BMW Motorrad ABS
OE
...... 33
Mirrors . . ..................... 33
Pneumatic pump............. 34
Air pressure in the Air Damp-
ing System . . . . . .............. 34
Damping ..................... 38
Tyres . . . . ..................... 40
Headlight ..................... 41
Seat . . . . . ..................... 41
5 Riding . . . . . . . . . . . . . . . . . . . . 43
Safety instructions . .......... 44
Checklist ..................... 46
Starting . . ..................... 46
Running in . . . . . .............. 48
Riding off-road . .............. 49
Brakes . . ..................... 50Parking your motorcycle . . . . . 51
Refuelling.................... 52
6 Engineering details . . . . . 55
Brake system with BMW Mo-
torrad ABS
OE
................ 56
7 Accessories . . . . . . . . . . . . . 59
General instructions .......... 60
Power socketOE.............. 60
Luggage ..................... 61
8 Maintenance . . . . . . . . . . . . 63
Notes........................ 64
Toolkit........................ 64
Engine oil.................... 65
Brake system . . .............. 67
Brake pads . . . . . .............. 68
Brake fluid.................... 69
Coolant . . ..................... 71
Clutch . . . ..................... 72
Tyres . . . . ..................... 73
Rims ......................... 73
Chain . . . . ..................... 73
Wheels . . ..................... 75

Operation
Operation
Ignition switch and steering lock..... 28
Multifunction display................. 28
Lights................................ 31
Turn indicators....................... 32
Emergency off switch (kill switch) . . . . 32
BMW Motorrad ABS
OE
.............. 33
Mirrors . . ............................. 33
Pneumatic pump . . .................. 34
Air pressure in the Air Damping Sys-
tem .................................. 34
Damping ............................. 38
Tyres................................ 40
Headlight............................ 41
Seat................................. 41
427zOperation

BMW Motorrad ABS
OE
Deactivating ABS functionSwitch on the ignition, or bring
the motorcycle to a stop.
Press and hold down ABS but-
ton1.
ABS warning light starts to
show.
Release the ABS button within
five seconds.
The ABS function is deactiv-
ated.ABS warning light remains
ON.
Activating ABS functionPress and hold down ABS but-
ton1.
ABS warning light goes out;
if self-diagnosis has not
completed it starts flashing.
Release the ABS button within
five seconds.
The ABS warning light remains
off or continues to flash.
The ABS function is activated.
Instead of pressing the ABS
button, you have the option ofswitching the ignition off and
then on again.
If you switch the ignition off
then on again and the ABS
light comes back on, there is a
fault in the ABS.
MirrorsAdjusting mirrorsTurn the mirror to the correct
position.
433zOperation

Adjusting mirror armSlacken nut1.
Turn the mirror arm to the ap-
propriate position.
Tighten the nut to the spe-
cified tightening torque, while
holding the mirror arm to en-
sure that it does not move out
of position.
Union nut, mirror
20 Nm
Pneumatic pumpUseYou can use the pump to check,
and if necessary correct, the
pressure in the Air Damping Sys-
tem ( 34) and in the tyres.Removing pneumatic
pumpRemove the seat ( 41)
Remove pneumatic pump1.
Installing pneumatic pumpSeat pneumatic pump1with
pressure gauge2down in the
holder.
Install the seat ( 42)Air pressure in the Air
Damping SystemAir Damping SystemThis motorcycle has an air-filled
rear suspension system known
as the Air Damping System.
In this system, it is a volume of
air in an enclosed chamber, not
a steel spring, that absorbs the
434zOperation

NotesThe Maintenance chapter de-
scribes straightforward proced-
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your motorcycle are listed
in the section entitled "Technical
data".
You will find information on more
extensive maintenance and re-
pair work in the Repair Manual
on DVD/CD-ROM (RepROM) for
your motorcycle, which is avail-
able from your authorised BMW
Motorrad dealer.
Some of the work calls for spe-
cial tools and a thorough know-
ledge of motorcycles. If you
are in doubt consult a specialist
workshop, preferably your author-
ised BMW Motorrad dealer.
ToolkitStandard on-board toolkit1 Fuse puller
Replacing fuses
2 Open-ended spanner, w/f
8/10
Adjusting chain tension
3 Open-ended spanner, w/f
19
Adjusting mirror arm
4 Open-ended spanner, w/f
19
Adjusting mirror arm5 Screwdriver handle
Holder for screwdriver blade9
6 3 mm Allen key
Replacing headlight bulb
7 4 mm Allen key
Removing and installing body
panels
8 6 mm Allen key
Adjusting headlight beam throw
9 Screwdriver blade
Star-head and flat-tip blade
Adjusting rear suspension
damping
864zMaintenance

Threaded fastenersFront wheel Value ValidNut on quick-release axle, front
M20 x 1.25 80 Nm
Front-axle retainer
M6 10 NmRear wheel Value ValidNut on quick-release axle, rear
M20 x 1.25 80 Nm
Locknut of the final-drive chain
tensioning screw
M8 25 NmMirror arm Value ValidUnion nut, mirror
20 Nm
Clamping screw, mirror to
handlebar fitting
21 Nm
10109zTechnical data

DimensionsLength of motorcycle 2205 mm
Height of motorcycle 1255 mm, without mirrors
1490 mm, with mirrors
Width of motorcycle 907 mm, Across mirrors
Front-seat height 930 mm, Without rider at unladen weight
Ground clearance 285 mmWeightsUnladen weight 156 kg, DIN unladen weight, ready for road, 90 %
load of fuel, without optional extras
Permissible gross weight 335 kg
Maximum payload 179 kg
10119zTechnical data

Ignition
Switching on and off, 28
Ignition switch, 27
Instrument cluster
Overview, 17
J
Jump starting, 95
K
Keys, 28
L
Laying up, 106
Lights
High-beam headlight, 31
Low-beam headlight, 31
Side light, 31
Low-beam headlight, 18
Luggage
Correct loading, 61
M
Maintenance, 123
Notes, 64Mirrors
Adjusting, 33
Motorcycle
Care, 103
Laying up, 106
Overview, 11, 13
Parking, 51
Restoring to use, 106
Multifunction display
See display, 17
N
Number-plate carrier
Removing and installing, 100
O
Odometer and tripmeters, 20
Resetting, 17, 29
Off-roading
Notes, 49
P
Pneumatic pump, 34
Removing and installing, 34
Power socket, 11, 60
Pre-ride check, 47R
Rear-wheel drive
Technical data, 113
Refuelling, 52
Restoring to use, 106
Rider's Manual
Stowage, 14
Running gear
Technical data, 113
Running in, 48
S
Safety instructions, 44
Seat
Lock, 13
Removing and installing, 41
Service, 122
Service Card, 122
Side light, 18
Spark plugs
Technical data, 117
Speedometer, 20
Standards, 7
Starter, 16
Starting, 46
12133zIndex