brake BMW MOTORRAD R 1150 RS 2002 Rider's Manual (in English)

i
2
Introduction
General information and con-
trols
General view, left side ........... 4
General view, right side ......... 5
Cockpit ................................. 6
Telltale and warning lights ..... 7
Ignition switch and steering
lock .................................... 8-9
Adjusting windshield ........... 10
Hazard warning flashers ...... 11
Left handlebar fitting ........... 12
Right handlebar fitting ......... 13
Adjusting handlebars ..... 14-15
Seat ............................... 16-17
System case .................. 18-19Safety check
Checklist ........................ 20-21
Engine oil ....................... 22-23
Fuel ................................ 24-25
Handlebar levers ............ 26-27
Brake system
- general ........................ 28-29
Brake system - without
BMW Integral ABS ......... 30-33
Brake system - with
BMW Integral ABS ......... 34-36
Clutch ................................. 37
Lights ............................. 38-42
Shock-absorber settings ..... 43
Spring preload .................... 44
Wheels ........................... 45-46
Accessories and tyres......... 47
Loading.......................... 48-49
Contents
10rsbkg2.book Seite 2 Dienstag, 19. November 2002 4:56 16

3
i
Introduction
Starting – Riding – Parking
First time out ................. 50-51
Important notes ............. 52-53
Side stand ..................... 54-55
Main (centre) stand ........ 56-57
Running in ..................... 58-59
Before you start ............. 60-61
Starting ......................... 62-63
Telltale and warning
lights ............................. 64-65
Rider Information
Display (FID) .................. 66-67
Riding and changing
gear ............................... 68-69
Brake system
- general ........................ 70-71
Brake system
- with BMW Integral ABS 72-78
BMW Integral ABS
- Troubleshooting chart ....... 79Arrive safely!
Arrive safely....................80-81
Service worldwide ............... 82
Environmental protection .... 83
BMW rider’s equipment ....... 84
BMW motorcycle equipment85
Training means extra safety. 86
Concluding thoughts ........... 87
Index ..............................88-92
Contents
10rsbkg2.book Seite 3 Dienstag, 19. November 2002 4:56 16

1
General information and controls
5
22192021
131416151718
13Seat lock (b 16)
14 Helmet holder, right
15 Fuse box (
b Maintenance
Instructions, Chapter 2)
16 Air filter (
b Maintenance
Instructions, Chapter 2)
17 Fuel filler cap (
b 25)
18 Brake fluid reservoir for front
brakes (
b 31, 35)
19 Type plate/vehicle identifi-
cation number 20
Primary spark plug, left
(
b Maintenance Instruc-
tions, Chapter 2)
21 Secondary spark plug, left
(
b Maintenance Instruc-
tions, Chapter 2)
22 Brake fluid reservoir for rear
brakes (
b 32, 36)
( ) Figure in brackets
bpage number for description
General view, right side
10rsbkg2.book Seite 5 Dienstag, 19. November 2002 4:56 16

1
General information and controls
13
678
109
d Warning:
To prevent air from entering
the brake system:
 Do not turn the fitting on the
handlebar.
6 Switch for heated handlebar
grips
OE
OHeating off
.50% (centre position)..100% 7
Starter button
8 Kill switch for ignition (
b 60)
9 Turn indicator cancel switch
Press
– Left/right turn indicators
off
10 Turn indicator switch, right
Press
– Turn indicators operate
To switch off turn indicators:
 Press turn indicator cancel
switch 9
OEOptional extra
Right handlebar fitting
10rsbkg2.book Seite 13 Dienstag, 19. November 2002 4:56 16

1
General information and controls
14
d Warning:
To ensure that no air enters
the brake or clutch hydraulic
circuits:
 Do not turn the fitting on the
handlebar.
d Warning:
The left and right stub handle-
bars must be repositioned
symmetrically if at all. Make
sure that lines and cables run
correctly. Avoid damage to
electrical wiring.
Retaining screw 1 must
always be tightened to the
correct torque value.
If you do not have a suitable
torque wrench, have the han-
dlebars adjusted by a special-
ist workshop, preferably a
BMW motorcycle dealer.
Adjusting handlebars
1
10rsbkg2.book Seite 14 Dienstag, 19. November 2002 4:56 16

2
21
2
Safety check
For this reason, check the
details in the following sections
before you start the journey:
– Fuel level
– Positions of the handlebar levers
– Brake fluid level
– Clutch fluid level
–Brakes
– Warning lights and telltale lights
–Lights
– Shock-absorber setting and spring preload
– Condition of wheels and
tyres, tread depth and tyre
pressures
– Load, gross weight – Check regularly on the basis
of this checklist
(every refuelling stop):
– Engine oil level
(every 2nd/3rd refuelling
stop):
– Brake pads
If you encounter any problems
or difficulties, it is always best to
contact your authorised
BMW motorcycle dealer. He will
provide the necessary advice
and assistance.
Checklist
10rsbkg2.book Seite 21 Dienstag, 19. November 2002 4:56 16

2
27
2
Safety check
1
4
A
Adjusting handbrake lever
d Warning:
To prevent air from entering
the hydraulic circuit of the
brake system:
 Do not turn the fitting on the
handlebar. Turn knob A to set the most
comfortable span:
–Setting 1: minimum span
–Setting 4: maximum span
Handlebar levers
10rsbkg2.book Seite 27 Dienstag, 19. November 2002 4:56 16

22
28
Safety check
Brake system - general
Work on the brake system
d Warning:
To ensure reliability have all
work on the brake systems
carried out by a specialist
workshop, preferably an au-
thorised BMW motorcycle
dealer.
Checking the brake sys-
tem
d Warning:
Sudden changes in play or
spongy action of the brake le-
ver indicate a fault in the
brake system.
Before riding off, therefore,
always check the resistance
of the front and rear brake le-
vers and test operation of the
brakes.
Do not ride the motorcycle if
you have any doubts about
the safety of the brake sys-
tem.
Immediately seek the advice
of a specialist workshop,
preferably an authorised
BMW motorcycle dealer.
10rsbkg2.book Seite 28 Dienstag, 19. November 2002 4:56 16

2
29
2
Safety check
Brake system - general
Checking brake pads
d Warning:
Have the brake pads replaced
before they wear to the mini-
mum permissible thickness:
have the work performed
by a specialist workshop,
preferably an authorised
BMW motorcycle dealer. Brake pad wear depends on
your personal style of riding.
To ensure reliable operation of
the brakes: do not allow pad
thickness to fall below the
specified minimum
(
b Maintenance Instructions,
Chapter 2).
10rsbkg2.book Seite 29 Dienstag, 19. November 2002 4:56 16

22
30
Safety check
Brake system - without BMW Integral ABS
Checking brake fluid levelGradual wear of the brake pads
causes the brake fluid level in
the reservoir to sink.
d Warning:
If brake fluid level in the fluid
reservoirs for the front or rear
brakes has dropped below
the MIN mark (
b 31, 32) have
the brake system checked
without delay by a specialist
workshop, preferably an au-
thorised BMW motorcycle
dealer.
Changing the brake fluid
d Warning:
Brake fluid is exposed to
severe thermal loads, and
absorbs moisture from the
atmosphere.
Consequently, the brake fluid
must be changed regularly
(see the
b Maintenance In-
structions, Chapter 1) by a
specialist workshop, prefera-
bly an authorised
BMW motorcycle dealer.
10rsbkg2.book Seite 30 Dienstag, 19. November 2002 4:56 16