Diagram ISUZU KB P190 2007 Workshop Repair Manual

8A-16 ELECTRICAL-BODY AND CHASSIS


RELAY
Battery and load location may require that a switch be placed
some distance from either component.
This means a longer wire and a higher voltage drop
1. The
installation of a relay between the battery and the load reduces
the voltage drop
2.
Because the switch controls the relay, amperage through the
switch can be reduced.


Relay Specifications and Configurations
Name/ Color Rated
voltage/ Coil resistance Internal circuit
Name/
color Rated
Voltage/Coil resistance Internal circuit
1T
(MICRO ISO)
/Black 12V
Approx. 92 Ω
Minimum
operating
voltage: 7V at
20 °C (77 °F)

1M (MINI
ISO)
/Black 12V Approx.
94 Ω Minimum
operating
voltage: 7V at
20 °C (77 °F)
1M
(MICRO ISO)
/Black 12V
Approx. 132-3
Ω Minimum
operating
voltage: 7V at
20 °C (77 °F)

1M
(power)/ Black 12V Approx.
94 Ω Minimum
operating
voltage: 7V at
20 °C (77 °F)
* Relay contact shown in the wiring diagram indicates condition before actuation.


BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

8A-18 ELECTRICAL-BODY AND CHASSIS


CONNECTOR
The connector pin shape determines whether the connector is
male or female.
The connector housing configuration does not determine
whether a connector is male or female.



The symbol illustrated in the figure is used as connector in the
circuit this section.




RTW 78ASH003101

Connector is identified with a number.




RTW 78ASH003201

The applicable terminal number is shown for each connector.



Connector terminal numbers are clearly shown.
Male side connector terminal numbers are in sequence from
upper right to lower left.
Female side connector terminal numbers are in sequence from
upper left to lower right.
NOTE:
For those connectors on which specific terminal numbers
on symbols are shown, the terminal numbers or symbols
are used in the circuit diagram, irrespective of the above
rule.


BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

8A-22 ELECTRICAL-BODY AND CHASSIS
READING THE CIRCUIT DIAGRAM
In this manual, each system has its own parts location illustration and circuit diagram.
And connector configurations used in the circuit diagram are shown at the end of this manual.
PARTS LOCATION: The parts location shows the location of the connectors
1 and the harnesses 2 used in the
each system.
CIRCUIT DIAGRAM: The circuit diagram shows the power supply
3, the load or loads 4 and the grounding
point(s)
5.
CONNECTOR LIST: The connector configuration shows each connector's number
6, configuration 7 and the pin
numbers
8, parts name 9 , connector color 10.

PARTS LOCATION


RTW 780MF002401

BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007

ELECTRICAL-BODY AND CHASSIS 8A-23
CIRCUIT DIAGRAM



CONNECTOR LIST




BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007

ELECTRICAL-BODY AND CHASSIS 8A-105
CIRCUIT DIAGRAM C24SE


RTW 680XF005001

BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

8A-106 ELECTRICAL-BODY AND CHASSIS
CIRCUIT DIAGRAM HFV6




RTW 78AXF018201


BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

ELECTRICAL-BODY AND CHASSIS 8A-107
CIRCUIT DIAGRAM 4JJ1-TC/4JK1-TC


RTW 78AXF025901

BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007

8A-108 ELECTRICAL-BODY AND CHASSIS
CIRCUIT DIAGRAM 4JH1-TC (LHD)




RTW 78AXF005101

BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

ELECTRICAL-BODY AND CHASSIS 8A-109
CIRCUIT DIAGRAM 4JA1T (L)


RTW 78AXF005801


BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007

8A-118 ELECTRICAL-BODY AND CHASSIS

CIRCUIT DIAGRAM C24SE Sheet 1/2


RTW 680XF005501

BACK TO CHAPTER INDEX
TO MODEL INDEXISUZU KB P190 2007