reverse KIA CARNIVAL 2007 Workshop Manual

2.Installation is the reverse of removal.
ECM MIRROR REPLACEMENT
1.Remove the ECM mirror cover (A).
2.Remove the cover and connector (A).
3. Push the ECM mirror base down to remove the ECM mirror assembly (B).
4.Installation is the reverse of removal.

[LHD]
[RHD]
4.Installation is the reverse of removal.
CUP HOLDER ASSEMBLY REPLACEMENT
1.Remove the front console assembly.
2. After removing the mounting bracket (A), remove the cup holder assembly (B).

3.Installation is the reverse of removal.
CONSOLE BOX REPLACEMENT
1.Remove the console box (A).
2.Installation is the reverse of removal.

2007 > 2.7L V6 GASOLINE >
REPLACEMENT
CLUSTER FACIA PANEL REPLACEMENT
a. When prying with a flat- tipped screwdriver, wrap it with protective tape, and apply protective tape around the
related parts, to prevent damage.
b. Put on gloves to protect your hands.
1. Tilt the steering column down.
2. Remove the screws, and detach the clips.
3. After disconnecting the connector (A), remove the cluster facia panel (B).
4.Installation is the reverse of removal.
a.Make sure the connector is plugged in properly.
CENTER FACIA PANEL REPLACEMENT
a.When prying with a flat- tipped screwdriver, wrap it with protective tape, and apply protective tape around the
related parts, to prevent damage.
b. Put on gloves to protect your hands.
1. Detach the clips, then remove the center facia panel (A).

2.Installation is the reverse the removal.
a.Make sure the connector is plugged in properly.
LOWER PANEL REPLACEMENT
1.Remove the crash pad side cover.
2. Remove the fuse box cover (A).
3.After loosening the crash pad lower panel mounting screws, then remove the lower panel (B).
4. Remove the parking brake lever (C).
[LHD]

[RHD]
5.Disconnect the connector (A).
6.Installation is the reverse of removal.
HEATER CONTROL UNIT REPLACEMENT
1.Remove the center facia panel.
2. Remove the console upper cover (A).
3. Disconnect the connector (B).
[LHD]

[RHD]
4.Loosen the air vent mounting screw, then remove the air vent (A).
5.After loosening the heater control unit mounting screws, then remove the heater control unit (A).
6.Installation is the reverse of removal.

4.Installation is the reverse of removal.
a.Make sure the connector are plugged in properly.
AUDIO ASSEMBLY REPLACEMENT
1.Remove the center facia panel.
2. Loosen the screws.
3.Disconnect the connector (A), then remove the audio assembly (B).
4.Installation is the reverse of removal.
a.Make sure the connector are plugged in properly.

4.Installation is the reverse of removal.
COVER REPLACEMENT
a.When prying with a flat- up screwdriver, wrap it with protective tape, and apply protective tape around the
related parts, to prevent damage.
b. Put on gloves to protect your hands.
1. Remove the crash pad side cover (A), crash pad center under cover (B).
(1) Crash pad side cover.
(2)Front crash pad center under cover, LH.

(3)Front crash pad center under cover, RH.
2.Installation is the reverse of removal.
AIR VENT REPLACEMENT
a.When prying with a flat- tipped screwdriver, wrap it with protective tape, and apply protective tape around the
related parts, to prevent damage.
b. Put on gloves to protect your hands.
1. Remove the side cover.
2. Loosen the mounting screws, then remove the air vent (A).