technical specifications Lancia Musa 2009 Owner handbook (in English)

EMERGENCY
OPENING/CLOSING
If the switch does not work, the sun-
roof can be operated manually as fol-
lows:
❒remove the protection cap set be-
tween the two sun curtains;
❒take the Allen wrench provided
❒fit the wrench into A-fig. 102and
turn it:
– clockwise to open the sunroof
– counter-clockwise to close the
sunroof. To close
When in wide open position, press
buttonA-fig. 101for over half a sec-
ond to set the front pane to the
“spoiler” position; press the button
again to stop the sunroof at an inter-
mediate position; press button Aagain
and keep it pressed to close the sun-
roof completely.
77
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
fig. 101L0D0098mfig. 102L0D0099m
If a cross roof rack is fitted,
the sunroof should be used
in the “spoiler” position only.
Do not open the sunroof with
snow or ice to avoid dam-
age.
Always remove the ignition
key when you get out of the
car to prevent the sunroof being op-
erated accidentally and constituting
a danger to the people left in the car.
The improper use of the sunroof can
be dangerous. Before and during its
operation ensure that any passengers
are not at risk from the moving roof
either by personal objects getting
caught in the mechanism or by be-
ing injured by it directly.
WARNING
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 77

78
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
DRIVER’S SIDE DOOR fig. 103
Two or five switches (where provided)
located on the internal armrest are
used, with ignition key at MAR:
Ato open/close the left front win-
dow;
Bto open/close the right front win-
dow;
WINDOW
WINDERS
POWER WINDOWS
The 2 button version (front power
windows only) does not feature auto-
matic lifting or lowering, while the 4
button version (front and rear power
windows) is equipped with automatic
lifting and lowering on the driver’s
side, automatic lowering on the pas-
senger’s side (also automatic lifting,
where provided) and automatic low-
ering only for rear power windows.
IMPORTANT With ignition key at
STOPor removed, the power win-
dows remain activated for about 2
minutes and are deactivated immedi-
ately the moment a door is opened.
fig. 103L0D0103m
Cto open/close the left rear window
(where provided);
Dto open/close the right rear win-
dow (where provided);
Eto inhibit rear door controls
(where provided). When the de-
vice is activated, the LED on the
button goes on.
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 78

79
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Automatic continuous operation
(where provided)
Some versions feature four power
windows with automatic lifting and
lowering of the front window (driver’s
side) and automatic lowering only of
the other windows.
AButton for continuous auto-
matic opening and closing;
B-C-DButtons for continuous auto-
matic opening only.
By pressing one of the buttons briefly,
the window moves “in pulse mode”
and stops on releasing the button.
PASSENGER’S SIDE DOOR
AND REAR DOORS (where
provided) fig. 104
The switch controlling the corre-
sponding window is located on the in-
ternal armrest of each door.
fig. 104L0D0103m
Incorrect use of the power
windows may be danger-
ous. Before operation, always check
that no-one is exposed to the risk of
being injured by directly by the
moving window or objects getting
caught and dragged. When leaving
the car, always remove the key from
the ignition device to avoid the risk
of injury due to accidental operation
of the power windows.
WARNING
fig. 105L0D0156m
MANUAL (where provided)
To open and to close the window use
the relevant window winderfig. 105.
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 79

80
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
TAILGATE CLOSING
Lower the tailgate by using handleA-
fig. 108as shown in the figure, then
press the tailgate until a lock click is
heard.
IMPORTANT If the “Key” option is
enabled, before closing the tailgate
ensure that you have the ignition key
with you, as the tailgate will be auto-
matically locked.BOOT
The tailgate can only be unlocked
from outside the car by using the elec-
tric opening handle A-fig. 106.
The tailgate can be opened at any
time if car doors are unlocked.
From the set-up menu of the display
located on the instrument panel (see
“Reconfigurable multifunctional dis-
play” in this section) it is possible to
enable the “Key” option in this way,
the boot is not unlocked together with
the doors; press button
Rof the re-
mote control to open.
Tailgate opening is indicated by dou-
ble flashing of direction indicators.
fig. 106L0D0390m
fig. 107L0D0378m
fig. 108L0D0391m
Do not fit additional objects
onto the rear window shelf
or tailgate (speakers, spoil-
ers, etc.) except when con-
templated by the manufacturer to en-
sure the correct operation of the side
gas shock absorbers of the tailgate it-
self.
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 80

81
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
When using the boot, do
not exceed the maximum
admissible loads (see section “Tech-
nical Specifications”). Make sure
that the objects are well arranged in
the boot so that they will not be pro-
jected forwards following sudden
braking.
WARNING
When travelling, do not
put any object on the rear
window shelf. they cause cause in-
jury to passengers in the event of an
accident or sudden braking.
WARNING
BOOT ENLARGEMENT WITH
FIXED SEAT
Proceed as follows:
❒attach the buckles to the tongues
(shown by the arrows) fitted on
the backrestfig. 109;
❒ensure that each of the two lengths
C-fig. 110of the side safety belt is
inserted in the respective belt
guide tongue D;
❒lift the cushion Aas shown in the
figure;
❒detach the backrest, by shifting
the levers Band tilt it forwards so
as to obtain a continuous loading
bed;
fig. 109L0D0428m
fig. 110L0D0429m
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 81

82
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
BONNET
OPENING THE BONNET
Proceed as follows:
❒pull lever A-fig. 111in the direc-
tion indicated by the arrow;
❒shift the lever towards the left B-
fig. 113 as shown by the arrow;
❒lift the bonnet and at the same
time release the rod C-fig. 112
from the catch D, then fit end of
the rod into the bonnet recess E.
IMPORTANT Before opening the
bonnet, check that windscreen wiper
arms are not lifted from the wind-
screen.
fig. 111L0D0113m
fig. 112L0C0115m
fig. 113L0D0392m
The bonnet must always be
perfectly closed while trav-
elling for safety reasons. Make sure
that the bonnet is perfectly closed
and that the lock is engaged. If you
discover that the bonnet is not per-
fectly closed while travelling, stop
immediately and close the bonnet in
the correct manner.
WARNING
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 82

83
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
TO CLOSE fig. 112
Proceed as follows:
❒hold the bonnet up with one hand
and with the other remove rod C
from seat and fit it back into its
catchD;
❒lower the bonnet to approximately
20 centimetres from the engine
compartment and let it drop.
Make sure that the bonnet is com-
pletely closed and not only fas-
tened by the safety catch by trying
to open it. If it is not perfectly
closed, open the bonnet and repeat
the procedure. Do not simply press
it.
IMPORTANT Always check that the
bonnet is closed properly to avoid its
opening while the car is travelling.ROOF BARS
(where provided)
IMPORTANT Roof bars from the
Lineaccesori Lancia should be used.
Always follow the instructions con-
tained in the assembly kit to the let-
ter. Fitting must be carried out by
qualified personnel.
The bonnet may drop sud-
denly if the supporting rod
is not in correct position.
WARNING
Only perform this operation
when the car is at a stand-
still
WARNING
fig. 114L0D0248m
IMPORTANT Never exceed the max-
imum admissible loads (see “Techni-
cal Specifications” section).
Check that the attachment fastening
screws are correctly positioned after a
few kilometres.
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 83

84
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
For countries that drive on the oppo-
site side of the road, in order not to
dazzle vehicles coming in the opposite
direction, it is essential to darken the
areas of the headlight according to the
instructions/measurements shown in
the figure; to do this, a non-transpar-
ent sticker is required. The illustra-
tions refer to the changeover from
left-hand drive to right-hand drive. Aiming the headlights fig. 115
To adjust, press buttons
andÒon
the instrument dashboard. The dis-
play provides the visual indication of
the positions during the adjustment
operation.
Position0- one or two persons on the
persons on the front seats – Position
1- five persons – Position 2- five per-
sons + luggage in the boot – Position
3- driver + maximum admissible
load all stored in the boot.
IMPORTANT Check beam aiming
every time the load carried changes.
HEADLIGHT BEAM
ADJUSTMENT ABROAD
fig. 116-117
Dipped beams factory adjustment de-
pends on the country where the car is
purchased.
HEADLIGHTS
BEAM DIRECTION
Correction direction of the headlights
is essential for the comfort and safety
of the driver and the other road users.
The headlights must be correctly di-
rected to ensure the best visibility con-
ditions when the headlights are on.
Contact a Lancia Dealership to have
the headlights properly adjusted.
HEADLIGHT AIMING DEVICE
This device works with the key at
MARand the dipped beam headlights
on. The car will slant backwards
when it is loaded, raising the light
beam. The beams must therefore be
directed again in this case.
Do not activate the sun roof
when roof bars are fitted.
fig. 115L0D0393mfig. 116L0D0118m
fig. 117L0D0119m
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 84

85
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
ABS SYSTEM
The car is fitted with an ABS braking
system, which prevents the wheels
from locking when braking, makes
the most of road grip and gives the
best control when emergency braking
under difficult road conditions.
The system is completed by EBD
(Electronic Braking Force Distribu-
tion), which distributes the braking
action between front and rear wheels.
IMPORTANT To achieve maximum
efficiency of the braking system, a
running in period of about 500 km is
required: during this time, avoid sud-
den, repeated and prolonged braking.SYSTEM INTERVENTION
Intervention of the ABS is detected by
a slight pulsing of the brake pedal ac-
companied by noise: such an event in-
dicates that you need to adjust your
speed to the type of road on which
you are travelling.
When the ABS intervenes it means
that you are approaching the grip
limit between tyres and road: slow
down to exploit all the available grip.
FAILURE INDICATIONS
ABS failure
It is indicated by the turning on of
warning light >on the instrument
panel together with the message
(where provided) shown on the re-
configurable multifunctional display
(see section “Warning lights and mes-
sages”).
In the case, the braking system will
work as normal without the extra po-
tentials offered by the ABS system.
Drive carefully to the nearest Lancia
Dealership to have the system
checked.When the ABS intervenes it
means that you are ap-
proaching the grip limit between
tyres and road: it is necessary to
slow down to adjust the speed ac-
cording to available grip.
WARNING
The ABS exploits the tyre
road grip to the full, but it
cannot improve it; you should there-
fore exercise great caution when dri-
ving on slippery surfaces without
taking unnecessary risks.
WARNING
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 85

86
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
EOBD SYSTEM
The EOBD system (European On
Board Diagnosis) allows continuous
diagnosis of the components of the car
correlated with emissions.
It also alerts the driver, by turning on
the warning light
Uon the instru-
ment panel (together with relevant
message on the multifunction display,
where provided) (see section “Warn-
ing lights and messages”), when these
components are no longer in peak
conditions.
The objective is:
❒to keep the system efficiency un-
der control;
❒to warn when a fault causes emis-
sion levels to increase;
❒to signal the need to replace worn
components. EBD failure
EBD failure is indicated by the turn-
ing on warning lights >andxon
the instrument panel, together with
the message (where provided) shown
on the multifunctional display (see
section “Warning lights and mes-
sages”).
In this case, the rear wheels may sud-
denly lock and the car may swerve.
Drive carefully to the nearest Lancia
Dealership to have the system
checked.
When the ABS intervenes,
a slight pulsing of the brake
pedal is felt. Do not lessen the pres-
sure of your foot on the pedal; main-
tain pressure on the brake without
hesitation; this will ensure that you
stop in the shortest possible space al-
lowed by the road conditions.
WARNING
If the warning lightxon
the instrument panel goes
on (and a message, were provided,
is shown in the multifunctional dis-
play), stop the car immediately and
contact your nearest Lancia Dealer-
ship. Leakage of hydraulic fluid
from the braking system will com-
promise functionality of the braking
system, either of the conventional
type or with ABS.
WARNING
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 86