display Lexus ES300h 2014 Navigation Manual

89
1. DESTINATION SEARCH
3
NAVIGATION SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Select “Edit Route” .
2This screen is displayed.
No.Function
Time necessary for the entire trip
Distance of the entire trip
Toll road
Freeway
Ferry
EDIT ROUTE
Conditions for the route to the destina-
tion can be set again.
No.FunctionPage
Select to add destinations.97
Select to delete destina-
tions. 98
Select to reorder destina-
tions. 97
Select to display the choic-
es available when setting
the conditions the system
uses to determine the route
to the destination.
101
INFORMATION
●
Even if the “Freeways” indicator is
dimmed, the route cannot avoid including
a freeway in some cases. (See page 101.)
●If the calculated route includes a trip by
ferry, the route guidance shows a sea
route. After you travel by ferry, the cur-
rent position may be incorrect. Upon
reception of GPS signals, it is automati-
cally corrected.

90
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
2. ROUTE GUIDANCE
1. ROUTE GUIDANCE SCREEN
During route guidance, various types of
guidance screens can be displayed de-
pending on conditions.
SCREEN LAYOUT
No.Function
Distance to the next turn and an ar-
row indicating the turning direction
Guidance route
Current position
Distance and travel/arrival time to
the destination
Current street name
INFORMATION
●
If the vehicle goes off the guidance route,
the route is searched again.
●For some areas, the roads have not been
completely digitized in our database. For
this reason, the route guidance may
select a road that should not be traveled
on.
●When arriving at the set destination the
destination name will be displayed on the
top of the screen. Selecting “Off ” clears
the display.
DURING FREEWAY DRIVING
During freeway driving, the freeway exit
information screen will be displayed.
This screen displays the distance to the
next junction/exit, or POIs in the vicinity
of the freeway exit.
No./ IconFunction
Distance from the current position to
the exit or junction
Exit number and junction name
Current position
POIs that are close to a freeway exit
Current street name
Select to display the selected map of
the exit vicinity.
Select to scroll to farther junctions or
exits.
Select to scroll to closer junctions or
exits.
Select to display the closest 3 junc-
tions or exits.

91
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
: Select to hide the freeway guidance
screen.
z Select “Intersection” , or press the “MAP/
VOICE” button on the Remote Touch, to
change back to the freeway guidance
screen.
: Select to hide th e intersection guid-
ance screen.
z Select “Intersection” , or press the “MAP/
VOICE” button on the Remote Touch, to
change back to the intersection guidance
screen.
WHEN APPROACHING A
FREEWAY EXIT OR
JUNCTION
When the vehicle approaches an exit or
junction, the freeway guidance screen
will be displayed.
No.Function
Next street name
Current position
Distance from the current position to
the exit or junction
WHEN APPROACHING AN
INTERSECTION
When the vehicle approaches an inter-
section, the intersection guidance
screen will be displayed.
No.Function
Next street name
Current position
Distance to the intersection

92
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■TURN LIST SCREEN
1Select “Turn List” during guidance to
display the turn list.
■ ARROW SCREEN
1Select “Turn-by-Turn Arrow” during
guidance to display the arrow screen.
OTHER SCREENS
On this screen, the list of turns on the
guidance route can be viewed.
No.Function
Turn direction
Distance between turns
Next street or destination name
Current street name
On this screen, information about the
next turn on the guidance route can be
viewed.
No.Function
Exit number or street name
Turn direction
Distance to the next turn
Current street name

96
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3. DISTANCE AND TIME TO DESTINATION
1Select the screen button indicated by
the arrow.
2Select the number screen button to dis-
play the desired destination.
zThe distance, estimated travel time and
estimated arrival time from the current
position to the selected destination are dis-
played.
When the vehicle is on the guidance
route, the distance and the estimated
travel/arrival time to the destination are
displayed. When the vehicle is not on the
guidance route, the distance and direc-
tion of the destination are displayed.
When driving on the guidance route
with more than 1 destination set, the dis-
tance and estimated travel/arrival time
from the current position to each desti-
nation are displayed.IconFunction
Estimated travel time is dis-
played.
Estimated arrival time is dis-
played.
Select to switch to estimated ar-
rival time.
Select to switch to estimated
travel time.
Displayed while driving off the
guidance route. The destination
direction is indicated by an arrow.
INFORMATION
●
When the vehicle is on the guidance
route, the distance measured along the
route is displayed. Travel time and arrival
time are calculated based on the set vehi-
cle speed information. (See “DRIVING
SPEEDS” on page 127.) However, when
the vehicle is not on the guidance route,
the distance is the linear distance
between the current position and the
destination.

97
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
4. SETTING AND DELETING DESTINATIONS
1Select “Route” .
2Select “A d d ”.
3Input an additional destination in the
same way as a destination search. (See
“DESTINATION SEARCH” on page
68.)
4Select the desired “A d d D e s t i n a t i o n
Here” to insert the new destination into
the route.
1Select “Route” .
2Select “Reorder” .
3Select the desired destination and se-
lect “Move Up” or “Move Down” to
change the arrival order.
4After selecting the destinations, select
“OK” .
zThe system searches for the guidance
route again, and displays the entire route.
ADDING DESTINATIONS
Destinations can be added and routes
can be searched again.
REORDERING
DESTINATIONS
When more than 1 destination is set, the
arrival order of the destinations can be
changed.

98
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Select “Route” .
2Select “Delete”.
zWhen more than 1 destination is set, a list
will be displayed on the screen.
3Select the destination to be deleted.
“Delete All” : Select to delete all destina-
tions on the list.
z A message appears to confirm the request
to delete.
4Select “Yes” to delete the destination(s).
zIf “Yes” is selected, th e data cannot be
recovered. If more than 1 destination has
been set, the system will recalculate the
route(s) to the set destination(s) as neces-
sary.
z If “No” is selected, the previous screen will
be displayed.DELETING DESTINATIONS
A set destination can be deleted.

100
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Select “Route” .
2Select “Overview” .
3The entire route from the current posi-
tion to the destination is displayed.
1Select or to skip to the next page
of the list of roads. Select and hold or
to scroll through the list of roads.
: This mark indicates the direction in which
you should turn at the intersection.
“Map” : The selected point is displayed on
the map screen.
ROUTE OVERVIEW
No.Function
Select to display a list of the turns re-
quired to reach the destination.
Select to start guidance.
TURN LIST
INFORMATION
●
However, not all road names in the route
may appear on the list. If a road changes
its name without requiring a turn (such as
on a street that runs through 2 or more
cities), the name change will not appear
on the list. The street names will be dis-
played in order from the starting point,
along with the distance to the next turn.

101
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
1Select “Route” .
2Select “Preferences” .
3Select “Preferred” , “Short” or “Alter-
nate” and select “OK”.
4The entire route from the starting point
to the destination is displayed.
“OK” : Select to start guidance.
1Select “Route” .
ROUTE PREFERENCE
TO SELECT ROUTE TYPE
The Preferred, Short or Alternative
route can be selected.
“Edit Route” : Select to change a route.
(See page 89.)
TO SELECT ROUTE FEATURES
A number of choices are available when
setting the conditions the system uses to
determine the route to the destination.

102
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
2Select “Preferences” to display condi-
tions that can be selected when the sys-
tem determines the route to the
destination.
3Select the desired route preferences.
z The system will avoid using routes that
include items whose indicators are off.
4After selecting the de sired route prefer-
ence, select “OK”.
1Select “Route” .
2Select “Preferences” .
3Select “Start from Adjacent Road” .
STARTING ROUTE FROM
ADJACENT ROAD
The route guidance can be started from
an adjacent road.
(e.g. When route guidance is set on the
freeway, but the vehicle is driven parallel
along the freeway.)
INFORMATION
●
When there is no adjacent road, this
screen button will not be displayed.