sensor MAZDA MODEL CX-5 2013 Quick Guide (in English)

9
When Driving
Higher sensitivity
Less sensitivitySwitch
Centre
position
Lock-release button
For details, refer to Section 4, “Transmission” or “Switches and Controls”.
Automatic Transaxle Controls
Operation of the Headlights
Without auto-light control With auto-light control
Operation of the Windscreen Wipers
With intermittent wiper With auto-wiper control
Single wipe cycle (mist)
Intermittent (With intermittent wiper)/
Auto control (With auto-wiper control)
Low speed Switch
PositionWiper operation
High speed
When the wiper lever
is in the
position, the rain
sensor senses the
amount of rainfall on
the windscreen and
turns the wipers on
or off automatically.
Various Lockouts:
Indicates that you must depress
the brake pedal and hold in the
lock-release button to shift (The
ignition must be switched ON).
Indicates the selector lever can be
shifted freely into any position.
Indicates that you must hold in
the lock-release button to shift.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

When Driving
10
i-ACTIVSENSE
Your vehicle is equipped with a variety of safety and driver support systems called
i-ACTIVSENSE
For details, refer to Section 4, “Switches and Controls”.
In addition, a Forward Sensing Camera (FSC) and Laser sensors are installed to
operate the systems.
Your vehicle is equipped with a Forward Sensing Camera (FSC). The Forward
Sensing Camera (FSC) is positioned near the rearview mirror and used by the
following systems. Safety and Driver Support Systems
• Smart City Brake Support (SCBS)
• Rear Vehicle Monitoring (RVM) System
• Lane Departure Warning System (LDWS)
• High Beam Control System (HBC)
Forward Sensing Camera
• High Beam Control System (HBC)
• Lane Departure Warning System (LDWS)
Always keep the windscreen glass around the camera clean by removing dirt or
fogging. Use the windscreen defroster to remove fogging on the windscreen.
• Adaptive Front Lighting System (AFS)
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

When Driving
11
Smart City Brake Support (SCBS)
The Smart City Brake Support (SCBS) system is designed to reduce damage in the
event of a collision by operating the brake control (SCBS brake) when the
system's laser sensor detects a vehicle ahead and determines that a collision with
the vehicle ahead is unavoidable.
For details, refer to Section 4, “Smart City Brake Support (SCBS)”.
It may also be possible to avoid a collision if the relative speed between your
vehicle and the vehicle ahead is less than about 15 km/h (9.3 mph).
Do not rely completely on the Smart City Brake Support (SCBS) system:
The Smart City Brake Support (SCBS) is a system which operates in response to a
vehicle ahead. It does not apply to 2-wheeled vehicles or pedestrians.
If the vehicle height or inclination is changed, the system will not be able to
correctly detect vehicles ahead resulting in the Smart City Brake Support
(SCBS) system not operating normally or mistakenly operating, which
could cause a serious accident.
WARNING
Do not modify the suspension:
NOTE
The Smart City Brake Support (SCBS) detects a vehicle ahead by emitting a
near-infrared laser beam and receiving the beam reflected off the reflector of the
vehicle ahead, and then using it for the measurement. Consequently, the Smart
City Brake Support (SCBS) may not operate under the following conditions:
• Trucks with low loading platforms and vehicles with an extremely low or
high profile.
• Under bad weather condition, such as rain, fog and snow.
• The window washer is being used or the windscreen wipers are not used when
its raining.
• The windscreen is dirty.
• The steering wheel is turned completely left or right, or the vehicle is acceler-
ated rapidly and comes close to the vehicle ahead.
Other details are described in the related text.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD