electrical MITSUBISHI LANCER 2005 Manual Online

MITSUBISHI LANCER 2005 Manual Online LANCER 2005 MITSUBISHI MITSUBISHI https://www.carmanualsonline.info/img/19/57321/w960_57321-0.png MITSUBISHI LANCER 2005 Manual Online

Page 425 of 788

MITSUBISHI LANCER 2005 Manual Online COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL54A-37
INSPECTION PROCEDURE 2: Speedometer does not work (the other meters work). <A/T>
IGNITION 
SWITCH (IG1)
A/T
CONTROL
RELAY
OUTPUT
SHAFT
SPEED
SENSOR

Page 426 of 788

MITSUBISHI LANCER 2005 Manual Online COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL54A-38
TECHNICAL DESCRIPTION (COMMENT)
The engine-ECU and its associated components, the 
combination meter assembly, the wiring harness, or 
the connector

Page 427 of 788

MITSUBISHI LANCER 2005 Manual Online COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL54A-39
STEP 3. Connector check: Combination meter 
connector C-04 and diagnosis connector C-11
Q:  Is combination meter connector C-04 and 
diagnosis conne

Page 428 of 788

MITSUBISHI LANCER 2005 Manual Online COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL54A-40
STEP 5. Retest the system.
Q: Is the speedometer normal?
YES : 
The procedure is complete. (If no 
malfunctions are found in all steps, an 
intermit

Page 429 of 788

MITSUBISHI LANCER 2005 Manual Online COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL54A-41
Q:  Is combination meter connector C-04 and 
engine-A/T-ECU connector C-124, C-126 in good 
condition?YES : 
Go to Step 8.
NO : Repair or replace th

Page 430 of 788

MITSUBISHI LANCER 2005 Manual Online COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL54A-42
STEP 8. Check the wiring harness between 
combination meter connector C-04 (terminal 11, 
12) and engine-A/T-ECU connector C-124 <LH 
drive vehicles

Page 431 of 788

MITSUBISHI LANCER 2005 Manual Online COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL54A-43
NOTE: 
Prior to the wiring harness inspection, check 
intermediate connectors C-14 (LH drive vehicles), 
C-13 (LH drive vehicles), C-136 (RH drive v

Page 432 of 788

MITSUBISHI LANCER 2005 Manual Online COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL54A-44
INSPECTION PROCEDURE 3: Tachometer does not work (the other meters work). 
TECHNICAL DESCRIPTION (COMMENT)
Ignition signal may not be received from

Page 433 of 788

MITSUBISHI LANCER 2005 Manual Online COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL54A-45
DIAGNOSIS PROCEDURE 
STEP 1. Check whether the diagnosis code is 
reset.
Q: Is the MPI-related diagnosis code set?
Code No.P0500 <M/T> or 23 <A/T> i

Page 434 of 788

MITSUBISHI LANCER 2005 Manual Online COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL54A-46
STEP 4. Check the wiring harness between 
combination meter connector C-04 (terminal 11) 
and engine-ECU connector C-127 (terminal 58) 
<M/T> or eng