RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual https://www.carmanualsonline.info/img/7/1731/w960_1731-0.png RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual

Page 181 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual COOLING
Water pump
CLEANING
It is very important not to scratch the gasket faces
of all aluminium components.
Use the product  Décapjoint  to dissolve the part
of the gasket which remains attached.
A

Page 182 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual COOLING
Water pump
Refitting is the reverse of removal.
Refit the timing belt  (see method described in
section  11 "Timing belt").
Remember to remove the TDC pin.
19
10272R
D7F Engine 
REFITTING
Spec

Page 183 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual COOLING
Water pump
Refit the timing belt (see method described in
chapter  11 "Timing belt").
Fill and bleed the cooling circuit (see section 19
"Filling - Bleeding").
19
SPECIAL TOOLING REQUIRED
Mot.

Page 184 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual COOLING
Water pump
19
SPECIAL TOOLING REQUIRED
Mot. 1202 Hose clip pliers
13090R
F8Q Engine 
Water pump bolt 1.6
Bolt for water pump pulley 2
Bolt for crankshaft pulley 2 + 115° ± 15°
TIGHTENING TO

Page 185 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual COOLING
Water pump
CLEANING
It is very important not to scratch the gasket faces
of all aluminium components.
Use the product  Décapjoint  to dissolve the part
of the gasket which remains attached.
A

Page 186 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual EXHAUST
General
19
ATTACHMENT OF THE PIPE UNDER THE BODY
The attachment of the pipe under the body is  by
the rubber mounting at (1).
This can generally be unhooked by hand by  ta-
king the weight off

Page 187 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual EXHAUST
General
19
MARKING THE AREA TO BE CUT 
The area to be cut is defined by two punch marks
on the exhaust pipe.
99226-1R
Depending on engine, there are a maximum of
two cutting areas on the exhau

Page 188 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual EXHAUST
General
19
FITTING THE AFTER SALES SLEEVE
95478R1
Once a collar has been used once, renew it.
The nut on the collar has a groove (A) to ensure it
is tightened to the correct torque. When the n

Page 189 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual EXHAUST
Pipe assembly
19
DIAGRAM OF EXHAUST PIPES AND LOCATION OF CUTTING AREAS 
1 Expansion box
2 Silencer
3 Catalytic converter
ZC Pipe cutting area
13124R
 E7J Engine   D7F Engine 
13126R
19-15

Page 190 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual EXHAUST
Pipe assembly
19
DIAGRAM OF EXHAUST PIPES AND LOCATION OF CUTTING AREAS 
13125R
1 Catalytic converter
2 Silencer
ZC Pipe cutting area  F8Q  Engine
19-16