wheel torque RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide

[x] Cancel search | Manufacturer: RENAULT, Model Year: 1997, Model line: KANGOO, Model: RENAULT KANGOO 1997 KC / 1.G
Pages: 208
RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide KANGOO 1997 KC / 1.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1731/w960_1731-0.png RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide
Search: (run flat, trip computer, checking oil, manual radio set, compression ratio, width)

Page 42 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide TOP AND FRONT OF ENGINE Timing belt 11 REFITTING An arrow indicating the direction of rotation and two dashes for setting are marked on the surface of the belt . Check that the engine is at the setti

Page 43 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide TOP AND FRONT OF ENGINE Timing belt 11 REMOVAL Place the vehicle on a 2 post lift. Disconnect the battery. Remove : - the front right hand wheel and the mud- guard, - the protective plastic covering

Page 45 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide TOP AND FRONT OF ENGINE Timing belt 11 REFITTING Check that the pin Mot. 1054 is in place. Fit the timing belt by aligning the belt markings with those of the camshaft, injection pump and crankshaf

Page 46 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide 12mm torx socket Angular tightening wrench TOP AND FRONT OF ENGINE Cylinder head gasket 11 SPECIAL TOOLING REQUIRED Mot. 591-04 Angle wrench for tightening cylinder head and index Mot. 1202 Hose

Page 52 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide TOP AND FRONT OF ENGINE Cylinder head gasket 11 SPECIAL TOOLING REQUIRED DEPOSE Place the vehicle on a 2 post lift . Disconnect the battery. Remove : - the bonnet , - the timing belt (see method d

Page 58 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide TOP AND FRONT OF ENGINE Cylinder head gasket 11 SPECIAL TOOLING REQUIRED REMOVAL Place the vehicle on a two post lift . Disconnect the battery. Remove : - the bonnet, - the timing belt (see method des

Page 75 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide FUEL MIXTURE Inlet manifold 12 Inlet manifold bolt and nut 2 TIGHTENING TORQUES (in daN.m) REMOVAL Remove: - the air filter, - the injector gallery (see section 13). Lift the vehicle. Remove the strut

Page 121 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide DIESEL EQUIPMENT Pump - Timing 13 IMPORTANT : the engine must only be rotated by turning a wheel, in 5th gear, and in its operating direction; if it is accidentally turned in the opposite direction, r

Page 181 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide COOLING Water pump CLEANING It is very important not to scratch the gasket faces of all aluminium components. Use the product Décapjoint to dissolve the part of the gasket which remains attached. A

Page 183 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals User Guide COOLING Water pump Refit the timing belt (see method described in chapter 11 "Timing belt"). Fill and bleed the cooling circuit (see section 19 "Filling - Bleeding"). 19 SPECIAL TOOLING REQUIRED Mot.
Page:   < prev 1-10 11-20 21-30 next >
Search: (headlight bulb, ESP inoperative, engine oil, wheel size, CD changer, clock setting)