JAGUAR XFR 2010 1.G Workshop Manual

Installation).

3. Measure and note the value both sides of the bush as illustrated prior to
removal.

4. CAUTION: Note the orientation of the bush prior to removal.

Using suitable marking tools, mark the bush and lower arm prior to
removal.

General Equipment: Hydraulic press

Installation


1. tool. NOTE: Make sure that the bush is correclty seated in the special
Special Tool(s): JLR-204-815

General Equipment: Hydraulic press www.JagDocs.com

Installation).

Halfshaft outer constant velocity joint retaining nut 300 221 - Lower arm to wheel knuckle retaining nut and bolt 190 140 - Lower arm to subframe retaining nut and bolt 192 142 - Lower arm to subframe retaining bolt 192 142 - Upper arm ball joint to wheel knuckle retaining nut 96 71 - Upper arm to subframe retaining nut and bolt 115 85 - Toe link to subframe ball joint retaining nut 90 66 - Toe link to wheel knuckle retaining nut and bolt 63 46 - Toe link setting nut 55 41 - Shock absorber and spring assembly upper mounting to body retaining nuts 28 21 - Shock absorber and spring assembly upper mounting retaining nut (without adaptive damping) 50 37 - Shock absorber and spring assembly upper mounting retaining nut (with adaptive damping) 27 20 - Shock absorber to lower arm retaining bolt 133 98 - Stabilizer bar link to stabilizer bar retaining nut 48 35 - Stabilizer bar clamp to subframe retaining bolt 55 41 - Stabilizer bar link to lower arm retaining nut 48 35 - Wheel and tire to wheel hub retaining nuts 125 92 - www.JagDocs.com