LEXUS LS430 2003 Factory Repair Manual
Page 1111 of 4500
Fig. 140: Removing Lock Nut, Parking Brake Wire Adjusting Nut W/Spring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the clip.
Page 1112 of 4500
Fig. 141: Removing Clip
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Using a screwdriver, slowly disengage the claw.
d. Separate the parkin
g brake cable assy No.1 from the brake control pedal sub-assy.
Page 1113 of 4500
Fig. 142: Separating Parking Brake Cable Assy No.1 From Brake Control Pedal Sub-Assy
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
10.REMOVE PARKING BRAKE CONTROL PEDAL ASSY
a. Disconnect the parkin
g brake switch connector.
Page 1114 of 4500
Fig. 143: Disconnecting Parking Brake Switch Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b.Using needle-nose pliers, disengage the wire harness from the parking brake control pedal assy.
Page 1115 of 4500
Fig. 144: Disengaging Wire Harness From Parking Brake Control Pedal Assy
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Remove the 2 bolts and separate the parkin
g brake release cable sub-assy from the body.
Page 1116 of 4500
Fig. 145: Removing Bolts And Separate Parking Brake Release Cable Sub-Assy From Body
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Remove the 3 nuts and parking brake control pedal sub-assy from the body.
HINT:
To make room for the procedure, separate the instrument panel junction block assy with bracket from the
body.
Page 1117 of 4500
<0029004c004a00110003001400170019001d000300350048005000520059004c0051004a0003003100580057005600030024005100470003003300440055004e004c0051004a0003002500550044004e00480003002600520051005700550052004f000300
33004800470044004f0003003600580045[-Assy From Body
Page 1118 of 4500
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
11.REMOVE PARKING BRAKE SWITCH ASSY
a. Remove the screw and parking brake switch assy.
12.DISCONNECT PARKING BRAKE RELEASE CABLE SUB-ASSY
a. Disconnect the parking brake cable from the parking brake control pedal sub-assy.
13.REMOVE PARKING PEDAL PAD
a. Tear off the parking brake pedal pad from the parking brake control pedal sub-assy by hand.
Fig. 147: Removing Parking Pedal Pad
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
14.REMOVE PARKING BRAKE PEDAL RETURN ABSORBER ASSY
a. Remove the 2 E-rin
gs, parking brake pedal return absorber assy and 2 bushings.
Page 1119 of 4500
Fig. 148: Removing Parking Brake Pedal Return Absorber Assy
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
15.INSTALL PARKING BRAKE PEDAL RETURN ABSORBER ASSY
a. Install the 2 bushings, parking brake pedal return absorber assy and 2 new E-rings.
Page 1120 of 4500
16.INSTALL PARKING PEDAL PAD
17.CONNECT PARKING BRAKE RELEASE CABLE SUB-ASSY
a. Connect the parking brake release cable sub-assy to the parking brake control pedal sub-assy.
18.INSTALL PARKING BRAKE SWITCH ASSY
a. Install the parking brake switch assy with the screw.
19.INSTALL PARKING BRAKE CONTROL PEDAL ASSY
a. Install the parking brake control pedal assy with the 3 nuts.
Torque: 13 N.m (130 kgf.cm, 9 ft.lbf)
b. Connect the instrument panel junction block assy with bracket.