LEXUS LS430 2003 Factory Repair Manual
Page 901 of 4500
Fig. 80: Removing Check Ball Body And Spring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Remove the bolt, lock plate and lock up control solenoid (SLU) and clutch control solenoid (SL2).
d. Remove the bolt and automatic transmission 3-way solenoid assy (S3).
e. Remove the bolt and automatic transmission 3-way solenoid (S2) and automatic transmission 3-
way solenoid (S4).
f. Remove the bolt and automatic transmission 3-way solenoid (S1).
g. Remove the bolt and automatic transmission 3-way solenoid (SR).
h. Remove the bolt, lock plate and clutch control solenoid No.1 (SL1) and line pressure control
solenoid (SLT).
Page 902 of 4500
Fig. 81: Removing Bolt And Automatic Transmission 3-Way Solenoid Assy (S3)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Page 903 of 4500
7.INSTALL TRANSMISSION VALVE BODY ASSY
a. Install the clutch control solenoid No.1 (SL1) and line pressure control solenoid (SLT) with the
lock plate and bolt.
Torque: 6.4 N.m (65 kgf.cm, 56 in..lbf)
b. Install the automatic transmission 3-way solenoid (SR) with the bolt.
Torque: 10 N.m (100 kgf.cm, 7 ft.lbf)
c. Install the automatic transmission 3-way solenoid (S1) with the bolt.
Torque: 10 N.m (100 kgf.cm, 7 ft.lbf)
d. Install the automatic transmission 3-way solenoid (S2) and automatic transmission 3-way solenoid
(S4) with the bolt.
Torque: 10 N.m (100 kgf.cm, 7 ft.lbf)
e. Install the automatic transmission 3-way solenoid (S3) with the bolt.
Torque: 10 N.m (100 kgf.cm, 7 ft.lbf)
f. Install the lock up control solenoid (SLU) and clutch control solenoid (SL2) with the lock plate and
bolt.
Torque: 6.4 N.m (65 kgf.cm, 56 in..lbf)
Page 904 of 4500
Fig. 82: Installing Automatic Transmission 3-Way Solenoid (S3) With Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Page 905 of 4500
g. Install the check ball body and spring.
Fig. 83: Installing Check Ball Body And Spring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
h. Align the groove of the manual valve with the pin of the lever.
Page 906 of 4500
Fig. 84: Aligning Groove Of Manual Valve With Pin Of Lever
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
i. Install the 20 bolts.
Torque: 11 N.m (110 kgf.cm, 8 ft.lbf)
Bolt length:
Bolt A: 36 mm (1.42 in.)
Bolt B: 25 mm (0.98 in.)
Bolt C: 45 mm (1.77 in.)
Bolt D: 50 mm (1.97 in.)
Page 907 of 4500
Fig. 85: Installing 20 Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
8.INSTALL TRANSMISSION WIRE
a. Coat a new O-ring of the ATF temperature sensor with ATF.
b. Connect the 9 connectors to the solenoid valves.
c. Install the 2 clamps with the 2 bolts.
Torque: 10 N.m (100 kgf.cm, 7 ft.lbf)
d. Install the ATF temperature sensor and lock plate with the bolt.
Torque: 10 N.m (100 kgf.cm, 7 ft.lbf)
Page 908 of 4500
Fig. 86: Installing ATF Temperature Sensor And Lock Plate With Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
9.INSTALL VALVE BODY OIL STRAINER ASSY
a. Coat a new O-ring with ATF.
b. Install the O-ring.
Page 909 of 4500
Fig. 87: Installing O-ring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Install the oil strainer with the 4 bolts.
Torque: 10 N.m (100 kgf.cm, 7 ft.lbf)
Page 910 of 4500
Fig. 88: Installing Oil Strainer With 4 Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
10.INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSY
a. Install the 3 ma
gnets in the oil pan.