NISSAN PATHFINDER 2017 R52 / 4.G Navigation Manual

INFO:
The traffic information icons are not displayed on
the map screen when the map scale is set to 8
miles (16 km) or higher.
“Traffic information on map” (page 7-6)
CHANGE MAP
The map view type can be changed by touching
[]/[] on the map screen.
The screen will change to North Up, Heading Up
and Birdview
TMeach time []/[]is
touched.
North Up
Heading Up
BirdviewTM
You can also set the map view by pushing
<SETTING> and touch [Navigation].
“Map view settings” (page 3-8)
3-7
3. Map operation

SETTING SPLIT SCREEN
It is possible to view the two types of map view or
the map view, and other information at the same
time. The right screen displays the map screen,
and the left screen displays a turn list or an
information screen.
1. Push<MAP>while the current location
map screen is displayed, the Display View
Bar is displayed.
2. Select the screen you would like to set.
“Display View Bar” (page 2-8)
MAP VIEW SETTINGS
The setup for the map view is performed from the
Settings menu.
1. Push <SETTING>.
2. Touch [Navigation].
The following settings are available.
3-8
3. Map operation

Menu itemAction
[Map & Display View] [Change Order] Sort the icon on the Display View Bar. [Full Map]Display full map screen.
[Split Map] Select one of the settings to be applied to the display.
“Display View Bar” (page 2-8)
[Intersection]
[Turn List]
[Where am I?]
[Turn by Turn]
[Fuel Economy]
[ECO Drive Report]
Menu item Action
[Map Preferences] [Map View ] [North Up] Select one of the map views to be applied to the map screen.
[Heading Up]
[Birdview (3D)]
[Long Range Heading Up] The position of the vehicle icon can be changed to view a wider area in the traveling direction. The vehicle icon is located slightly lower than the center of the
screen.
Long Range Map View is available only when the map view is “Heading Up”.
[Map Color] Select a preferred map color.
[Map Text Size] [Large] Sets the font size.
[Medium]
[Small]
3-9
3. Map operation

Menu itemAction
[Birdview Angle] Adjusts the BirdviewTMangle.
[Auto North Up] Sets the top of the map to remain oriented to the north.
[Show FWY Exit] Sets the display of the freeway exit information icon on/off.
[Automatic Display in Fwy Mode] The turn list can be set to on or off to be displayed automatically while driving on
a freeway.
[Names Displayed on Map] [Place Names] Allows place names to be displayed on the map screen.
[POI Names] Allows facilities names to be displayed on the map screen.
[Road Names] Allows road names to be displayed on the map screen.
[Left Split Map Settings] [Left Side Map Orientation] The map view for the left side of split screen can be selected from North Up or Heading Up.
[Long-Range Driving Direc-
tion] Allows the map view for the left side of the split screen to change the position of
the vehicle icon so that a wider area in the traveling direction can be viewed. The
vehicle icon is located slightly lower than the center of the screen.
3-10
3. Map operation

SETTING INFORMATION ON
MAP
Some information on the map can be displayed
or hidden.
DISPLAYING FACILITY ICONS
The facility icons can be displayed or hidden by
type.
1. Push<SETTING>.
2. Touch [Navigation].
3. Touch [POI Icons Displayed on Map].
4. Touch the preferred icon. The indicator of the selected icon illuminates.
INFO:
. The map icons are not displayed on the
map screen when the map scale is set
to 1/4 mile (500 m) or higher in the 2D
and Birdview
TMmap.
. If brand icons are registered in the map data,
the brand they will be displayed on the map
instead of the general map icons listed.
Available setting icon .
: Restaurant .
: Gas Station
.
: Hotel
.
:ATM
.
: Rest Area
DISPLAYING MAP SCROLLING IN-
FORMATION
Information about the location, on which the
center of the cross pointer is placed by scrolling
on the map, can be set to be displayed.
1. Push <SETTING>.
2. Touch [Navigation] and touch [Other Set- tings].
3. Touch [Map Scrolling Information].
4. Touch the preferred information item. The following information items are available.
.[Stored Location Icon Info]
.[Destination/Waypoint Icon Info]
.[Latitude/Longitude Info]
ROAD COLOR
The road types are differentiated by color.
Freeway: Red or light red (zoomed in)
Main road: Brown or dark yellow
Narrow street: Gray
Road with incomplete map data: Dark green
3-11
3. Map operation

TRAFFIC INFORMATION ON
MAP
With a subscription to the SiriusXM Traffic, traffic
information is displayed.
“Traffic information on map” (page 7-6)
Free Flow: Green arrow
Moderate traffic: Yellow arrow
Heavy traffic: Red
Section affected by serious traffic event: Purple
The following traffic information icons may be
displayed
: Accident
: Closed road
: Information
: Road work
: Slippery road
: Weather
: Incident
3-12
3. Map operation

4 Setting destination
Changing region ........................................................................\
4-2Specifying state/province .................................................. 4-2
Specifying city ...................................................................... 4-2
Destination screen .................................................................... 4-3
Finding address ........................................................................\
. 4-7
Finding points of interest ......................................................... 4-8 Searching by a landmark name ........................................ 4-8
Searching from the landmark category .......................... 4-9
Setting home as destination ................................................ 4-10
Finding nearby place ............................................................. 4-11
Searching from Stored Locations ...................................... 4-11
Searching from history .......................................................... 4-12
Using Journey Planner .......................................................... 4-12
Setting intersection ................................................................ 4-13 Setting freeway entrance/exit ............................................. 4-14
Setting city center ................................................................. 4-14
Setting by phone number .................................................... 4-15
Setting from stored routes .................................................. 4-15
Searching by connecting Data Center ............................. 4-16
Setting by NissanConnect
SMServices ............................ 4-17
Searching by using IVR soft button on map ........... 4-17
Using Google send-to-car ........................................... 4-17
Using Destination Send to Car ................................... 4-17
Setting point on map ............................................................ 4-18
Procedures after setting route ........................................... 4-18
Moving location of destination .................................... 4-19

CHANGING REGION
When setting a destination, the location can be
narrowed down by specifying the region or city.
SPECIFYING STATE/PROVINCE
The state to be searched will be changed when
searching for a destination by entering an
address: [Street Address], [Points of Interest]
or [Intersection], etc.
1. Push<NAVI>.
2. Touch [Destination Menu].
3. Touch the key of the desired search method to be set.
4. Touch [State/Province:].
5. Enter the name of the state and then touch [List]. A list screen is displayed.
6. Touch the preferred region from the list. After setting, the display automatically returns to
the Destination screen.
INFO:
. It is not possible to search for a route from
the continental United States to Hawaii.
. When the system is restarted, it sets the
state to that automatically detected by the
GPS.
. When display State/Province input screen,
touch [Country] to change the country.
SPECIFYING CITY
When searching for a destination, the search can
be narrowed down by specifying the city.
1. Touch [City]. A character input screen is
displayed.
2. Enter the name of the city and then touch [List]. A list screen is displayed.
INFO:
.The same screen will be displayed when alocation is searched from a street.
.Touch [Last 5 Cities] to display the lastfive cities set as destinations.
.Touch [All Cities] to display the all cities in
the current state/province.
3. Touch the city of the destination from the list.
INFO:
The number of matches are displayed to the left
of the entry results. In some cases, the number of
matches displayed on the screen and in the list
may differ. If this occurs, enter more characters
to further reduce the number of matches.
4-2
4. Setting destination

DESTINATION SCREEN
There are several methods that can be used to set a destination. Understand the advantages of each method and select the best method for finding and
setting a preferred destination.
StepSetting item Action
Push <NAVI>. [Street Address] Searches for a destination by address.
“Finding address” (page 4-7)
[Points of Interest] Searches for a destination from various categories of businesses or locations.
“Finding points of interest” (page 4-8)
[Home] Searches for a route from the current location to the previously stored home destination.
“Setting home as destination” (page 4-10)
[Destination Menu] [Street Address] Searches for a destination by address.
“Finding address” (page 4-7)
[Points of Interest] Searches for a destination from various categories of businesses or locations.
“Finding points of interest” (page 4-8)
4-3
4. Setting destination

StepSetting item Action
[Home] Searches for a route from the current location to the previously stored
home destination.
“Setting home as destination” (page 4-10)
[Nearby Places] Searches for points of interest near the current vehicle location, such as restaurants and charging stations, etc.
“Finding nearby place” (page 4-11)
[Stored Locations] Searches for a destination from the list of the stored locations.
“Searching from Stored Locations” (page 4-11)
[Previous Destinations] Sets the previous starting point as the destination. Searches for the destination from the previous destinations.
“Searching from history” (page 4-12)
[Journey Planner] Sets a route plan downloaded from the NISSAN Owner’s Portal Website.
“Using Journey Planner” (page 4-12)
[Intersection] Searches for a destination from an intersection.
“Setting intersection” (page 4-13)
[Freeway Entrance/Exit] Searches for a destination from a freeway entrance/exit.
“Setting freeway entrance/exit” (page 4-14)
[City Center] Sets the center of a city as the destination.
“Setting city center” (page 4-14)
[Phone Numbers] Searches for a point of interest by a telephone number.
“Setting by phone number” (page 4-15)
[Stored Routes] Selects a stored route.
“Setting from stored routes” (page 4-15)
[Connected Search] Input a keyword of a point of interest and connect and search the NissanConnect
SMServices Data Center.“Searching by connecting Data Center” (page 4-16)
4-4
4. Setting destination