NISSAN TERRANO 2002 Service Repair Manual

UNDERBODY
Measurement (Hardtop model)
NBF028
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-53

NBF029
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-54

UNDERBODY
Measurement (Wagon model)
NBF030
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-55

NBF031
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-56

Detailed Measurement Points
Points Detailed pointsCoordinates mm (in)
ªXº ªYº ªZº
q
Aqa
SBF274B
Body mounting
bracket hole450.0
(17.72)þ488.5
(þ19.23)58.0
(2.28)
q
Dqd605.0
(23.82)597.5
(23.52)4.7
(0.18)
q
Eqe593.5
(23.37)1,537.0
(60.51)10.0
(0.39)
q
Gqg
W:
600.0
(23.62)W:
2,135.0
(84.06)W:
140.2
(5.52)
q
Kqk593.5
(23.37)
W:
3,477.5
(136.91)
H:
2,997.5
(118.01)195.5
(7.70)
q
Bqb
NBF032
Front shock
absorber bracket
mounting hole442.0
(17.40)þ16.0
(þ0.63)196.5
(7.74)
q
Cqc
NBF033
Compression rod
mounting hole362.6
(14.28)290.0
(11.42)þ158.9
(þ6.26)
q
1: Coordinate indicated isLH,RHcoordinate is -LHcoordinate.
E.g. ifLHcoordinate is: 698.5,RHcoordinate is: þ698.5.
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-57

Points Detailed pointsCoordinates mm (in)
ªXº ªYº ªZº
q
Fqf
NBF034
Lower link mount-
ing bracket hole538.0
(21.18)
W:
2,059.0
(81.06)
H:
1,859.0
(73.19)þ146.0
(þ5.75)
q
Hqh
NBF035
Upper link mount-
ing bracket hole270.7
(10.66)
W:
2,382.3
(93.79)
H:
2,182.3
(85.92)5.0
(0.20)
q
Iqi
NBF036
Rear spring
mounting bracket
hole375.0
(14.76)
W:
2,610.0
(102.76)
H:
2,410.0
(94.88)210.0
(8.27)
q
j
NBF037
Rear panhard rod
mounting bracket
holeRH
only
þ495.8
(þ19.52)
W:
2,843.7
(111.96)
H:
2,643.7
(104.08)þ55.0
(þ2.16)
q
1: Coordinate indicated isLH,RHcoordinate is -LHcoordinate.
E.g. ifLHcoordinate is: 698.5,RHcoordinate is: þ698.5.
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-58

Points Detailed pointsCoordinates mm (in)
ªXº ªYº ªZº
q
Lql
NBF038
5th crossmember
location hole225.0
(8.86)
W:
2,961.0
(116.58)
H:
2,637.0
(103.82)
W:
264.4
(10.41)
H:
284.4
(11.20)
q
Mqm6th crossmember
location hole300.0
(11.81)
W:
3,530.0
(138.98)
H:
3,050.0
(120.08)240.6
(9.47)
q
1: Coordinate indicated isLH,RHcoordinate is -LHcoordinate.
E.g. ifLHcoordinate is: 698.5,RHcoordinate is: þ698.5.
BODY (ALIGNMENT)
Alignment (Cont'd)
BT-59

NOTES

CLUTCH
SECTION
CL
CONTENTS
PRECAUTIONS AND PREPARATION............................2
Precautions ..................................................................2
Preparation ..................................................................2
CLUTCH SYSTEM...........................................................3
Clutch Pedal ................................................................4
INSPECTION AND ADJUSTMENT.................................5
Adjusting Clutch Pedal ................................................5
Bleeding Procedure .....................................................6
CLUTCH MASTER CYLINDER.......................................7
HYDRAULIC CLUTCH CONTROL.................................8Clutch Master Cylinder ................................................8
Clutch Operating Cylinder ...........................................8
CLUTCH RELEASE MECHANISM.................................9
CLUTCH DISC AND CLUTCH COVER........................ 11
Clutch Disc................................................................. 11
Clutch Cover and Flywheel .......................................12
SERVICE DATA AND SPECIFICATIONS (SDS)..........14
General Specifications ...............................................14
Inspection and Adjustment ........................................14

Precautions
IRecommended fluid is brake fluid ªDOT 4º.
IDo not reuse drained brake fluid.
IBe careful not to splash brake fluid on painted areas.
IWhen removing and installing clutch piping, use Tool.
ITo clean or wash all parts of master cylinder, operating
cylinder and clutch damper, use clean brake fluid.
INever use mineral oils such as gasoline or kerosene. It will
ruin the rubber parts of the hydraulic system.
WARNING:
Remove all dust from clutch disc with a dust collector after
cleaning with waste cloth.
Preparation
SPECIAL SERVICE TOOLS
*: Special tool or commercial equivalent
Tool number
Tool nameDescription
ST20050010
Base plate
Inspecting diaphragm spring of clutch cover
ST20050100
Distance piece
Inspecting diaphragm spring of clutch cover
GG94310000
Flare nut torque
wrench
Removing and installing each clutch piping
KV30100100*
Clutch aligning bar
Installing clutch cover and clutch disc
ST20050240*
Diaphragm spring
adjusting wrench
Adjusting unevenness of diaphragm spring of clutch
cover
SBR820B
PRECAUTIONS AND PREPARATION
CL-2