display CITROEN C-ELYSÉE 2016 Service Manual

135
C-elysee_en_Chap09_info-pratiques_ed01-2016
Breakdown related to a lack of AdBlue® additive
When switching on the ignition, the SERVICE w
arning   lamp   comes   on   and   the   UREA  
w

arning   lamp   flashes,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
0 k

m   or   miles   -   ("NO   START   IN   0   miles"   means  
"

Starting
 p
revented").
The
 Ad

Blue
® tank is  empty:  t he  s ystem  r equired  b
y
 
regulations   prevents   engine   starting.
Remaining range between 0 and 350 miles (0 and 600 km)
When switching on the ignition, the SERVICE warning   lamp   comes   on   and   the   UREA  
w

arning   lamp   flashes,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
a

  distance   indicating   the   remaining   range  
e

xpressed   in   miles   or   kilometres   before  
e

ngine   starting   is   prevented   -   (For   example  
"

NO START   IN   180   miles"   means   "Starting   will  
b

e   prevented   in   180   miles).
When
  driving,   this   display   appears   every  
3

0   seconds   until   the   additive   tank   has   been  
t

opped-up.
Go
  to   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   AdBlue
® tank topped-up.
Y
ou
 
can
 
also
 
top-up
 
the
 
tank
 
yourself.
Other wise you will not be able to restart your
engine.
For
 
more
 
information
 
on
 
topping-up   the  
Ad

Blue
® additive, refer to the corresponding s
ection. To
  be   able   to   start   the   engine,  
w

e   recommend   that   you   call   on  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop   for   the   top-up   required.   If  
y

ou   carry   out   the   top-up   yourself,   it   is  
e

ssential   to   add   at   least   3.8   litres   of  
Ad

Blue
® to the additive tank.
F
or
 
more   information   on   topping-up  
t

he
 
AdBlue
® additive, refer to the c
orresponding s ection.
9
Practical information

136
C-elysee_en_Chap09_info-pratiques_ed01-2016
Star ting prevented
Every  time   the   ignition   is   switched   on,   the  
S

ERVICE   and   engine   diagnostic   warning  
l

amps   come   on   and   the   UREA   warning   lamp  
f

lashes,   accompanied   by   the   temporary   display  
o

f   "NO   START   IN"   and   0   miles   or   kilometres -  
(

"NO   START   IN   0   miles"   means   "Starting  
p

revented").
To
  be   able   to   start   the   engine,   you   must   call   on  
a

  CITROËN   dealer   or   a   qualified   workshop.
You
  have   exceeded   the   authorised  
d

riving   limit:   the   starting   prevention  
s

ystem   inhibits   engine   starting.
In the event of a fault with the the SCR emissions control system
In the event of the detection
of a fault
The  UREA,   SERVICE   and   diagnostic   warning  
l

amps   comes   on,   accompanied   by   an   audible  
s

ignal   and   the   display   of   the   message  
"

Emissions
 f
ault".
The
  alert   is   triggered   when   driving,   when  
t

he   fault   is   detected   for   the   first   time,   then  
w

hen   switching   on   the   ignition   for   subsequent  
j

ourneys,   while   the   fault   persists.During an authorised driving phase
(between 650 miles and 0 miles) (1 100 km and 0 km)
If a fault with the SCR system is confirmed (after 3 0 miles   (50   km)   covered   with   the   permanent   display o

f   the   message   signalling   a   fault),   the   SERVICE
 a

nd   engine   diagnostic   warning   lamps   come   on   and
 t

he   UREA   warning   lamp   flashes,   accompanied   by
 a

n   audible   signal   and   the   temporary   display   in   the
 i

nstrument   panel   of   "NO   START   IN"   and   a   distance,
 i

ndicating   the   remaining   range   express   in   miles   or
 k

ilometres   before   engine   starting   is   prevented   -
 
(

e.g.:   "NO   START   IN   350 miles"   means   "Starting   will
 b

e   prevented   in   350 miles").
A system that prevents engine starting is activated automatically from 650 miles (1 100 km) after confirmation of a fault with the SCR emissions control   system.   Have   the   system   checked   by   a   CITROËN   dealer   or   a   qualified   workshop   as   soon   as   possible.
If
  it   is   a   temporary   fault,   the   alert  
d

isappears   during   the   next   journey,  
a

fter   a   self   diagnosis   test   of   the   SCR  
e

missions   control   system.
While driving, this display appears every 30 seconds   while   the   fault   with   the   SCR   system p

ersists.
The
  alert   is   repeated   when   switching   on   the   ignition.
You
  should   go   to   a   CITROËN   dealer   or   a   qualified
 w

orkshop   as   soon   as   possible.
Other wise, you will not be able to restart your
engine.
Practical information

139
C-elysee_en_Chap09_info-pratiques_ed01-2016
F Obtain  a   bottle   of   AdBlue®. After first c
hecking
 
the
 
use-by
 
date,
  read   carefully  
t

he instructions on use on the label before
pouring
 
the
 
contents
 
of
 
the   bottle   into   your  
v

ehicle's
 Ad

Blue
® tank. F  
A
fter   emptying   the   bottle,   wipe   away   any  
s

pillage   around   the   tank   filler   using   a   damp  
c

loth.
F  
R
efit   the   blue   cap   to   the   tank   and   turn   it   a  
6th of a turn clockwise, to its stop.
F
 R
efit   the   plastic   blanking   plug,   clipping   it   in  
t

he   orifice.
F
 
R

eturn   the   storage   box   containing   the   tools  
t

o
  its   location.
F
 
R

efit   the   boot   floor   and   close   the   boot.
Important:
 
if
 
your
 
vehicle's
 
AdBlue
® tank i
s
 
completely
 
empty
 
-
 
which
 
is
 
c

onfirmed
 
by
 
the
 
alert
 
displays
 
and
  the  
i

mpossibility
 
of
 
starting
 
the
 
engine
 
-  
you
 
must
 
add
 
at
 
least
 
3.8
 
litres
 

(so
 
two
 
1.89
 
litre
 
bottles). If
  any   additive   is   split   or   splashed,   wash  
i

mmediately  
w
ith  
c
old  
w
ater  
o
r  
w
ipe  
w
ith  
a

  damp   cloth.
If   the   additive   has   crystallised,   clean   it  
o

ff   using   a   sponge   and   hot   water.Important:
 i
n the event of a top-up after
a breakdown because of a lack of
additive ,   you   must   wait   around   5 minutes
 b

efore   switching   on   the   ignition,   without
opening the driver's door, locking the
vehicle or introducing the key into the
ignition switch .
Switch   on   the   ignition,   then,   after
 1

0 seconds,   start   the   engine.
Never   dispose   of   AdBlue
® additive b
ottles
 
in
 
the
 
household
 
waste.   Place  
t

hem
 
in
 
a
 
special
 
container   provided  
t

his
 p

urpose
 o

r
 t

ake
 t

hem
 t
o
 y
our
 d
ealer.
9
Practical information

185
C-elysee_en_Chap10_verifications_ed01-2016
Coolant level
The coolant level should be close to   the   "MA X"   mark   but   should   never  
e

xceed   it.
In
 
addition,   as   the   cooling   system   is   pressurised,
 w

ait
 
at
 
least   one   hour   after   switching   off   the
 e

ngine
 
before   carrying   out   any   work.
To
 
avoid
 
any   risk   of   scalding,   unscrew   the   cap  
b

y
 
two
 
turns   to   allow   the   pressure   to   drop.  
W

hen
 
the
  pressure   has   dropped,   remove   the  
c

ap
 
and
 
top   up   the   level.
Changing the coolant
The coolant does not have to be replaced at routine ser vices.
Fluid specification
The coolant must conform to the manufacturer's r ecommendations.
When
  the   engine   is   warm,   the   temperature   of  
t

he   coolant   is   regulated   by   the   fan.
The cooling fan may star t after switching
off the engine: take care with ar ticles and
clothing that might be caught by the fan
blades.
Fluid specification
For optimum cleaning and to avoid freezing, t his   fluid   must   not   be   topped   up   or   replaced  
w

ith   plain   water.
In
 
w
intry  
c
onditions,  
i
t  
i
s  
r
ecommended  
t
hat  
y
ou  
u

se   an   ethyl   alcohol   or   methanol   based   fluid.
Screenwash fluid level
Top up the level when necessary.
To p p i n g u p
This additive must be topped up by a CITROËN dealer   or   a   qualified   workshop   without   delay.
Diesel additive level (Diesel
engine with particle filter)
A low additive level is indicated by illumination of   the   service   warning   lamp,   accompanied  
b

y   an   audible   warning   and   a   message   in   the  
s

creen   (if   a   display   screen   is   fitted).Avoid
  prolonged   contact   of   used   oil   or  
f

luids   with   the   skin.
Most   of   these   fluids   are   harmful   to  
h

ealth   or   indeed   very   corrosive.
Do   not   discard   used   oil   or   fluids   into  
s

ewers   or   onto   the   ground.
Take   used   oil   to   a   CITROËN   dealer   or  
a

  qualified   workshop   (France)   or   to   an  
a

uthorised   waste   disposal   site.
Used products
10
Checks

186
C-elysee_en_Chap10_verifications_ed01-2016
Checks
12 V battery
The battery does not require any maintenance.
However,
  check   regularly   that   the  
t

erminals   are   correctly   tightened  
(

versions   without   quick   release  
Particle filter (Diesel)
The start of saturation of the
particle  filter   is   indicated   by  
t

he
 
fixed
 
illumination   of   this   warning   lamp  
a

ccompanied   by   a   warning   message   in   the  
s

creen
 
(if
 
a
 
display   screen   is   fitted).
As
 
soon
 
as
 
the   traffic   conditions   permit,  
r

egenerate
 
the   filter   by   driving   at   a   speed   of   at  
l

east
 
40
 
mph
  (60   km/h)   until   the   warning   lamp  
g

oes
 
off.
If
 
the
 
warning   lamp   stays   on,   this   indicates   a  
l

ow
 
additive
 
level.
On a new vehicle, the first particle
filter
 
regeneration   operations   may   be  
a

ccompanied   by   a   "burnt"   smell,   which  
i

s
 
per fectly   normal.
Following
  prolonged   operation   of   the  
v

ehicle   at   very   low   speed   or   at   idle,  
y

ou
 
may,   in   exceptional   circumstances,  
n

otice
 
the   emission   of   water   vapour   at  
t

he
 
exhaust   on   acceleration.   This   does  
n

ot affect the behaviour of the vehicle
or
 
the
 
environment.
Unless
 
other wise
 
indicated,
 
check
 
these
 
components
 
in
 
accordance
 
with
 
the
 
manufacturer's
 
service
 
schedule
 
and
 
according   to   your   engine.
Other wise,
 
have
 
them
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop.
Air filter and passenger compartment filter
Refer to the manufacturer's s
ervice   schedule   for   details   of   the  
r

eplacement   intervals   for   these  
c

omponents.
Oil filter
Replace the oil filter each time the e ngine   oil   is   changed.
Refer
  to   the   manufacturer's  
s

ervice   schedule   for   details   of  
t

he   replacement   interval   for   this  
c

omponent.
terminals)
 
and
 
that
 
the
 
connections
 
are
 
clean.
When
 
carrying
 
out
 
any
 
operation
 
on
 
the
 
12
 
V
 
b

attery,
 
refer
 
to
 
the
 
corresponding
 
section
 
for
 
d

etails
 
of
 
the
 
precautions
 
to
 
be
 
taken
 
before
 
s

tarting
 
work.
Depending  on   the   environment   (e.g.   dusty  
a

tmosphere)   and   the   use   of   the   vehicle  
(

e.g. city
 
driving),   replace them twice as often
if necessar y .
A
 
clogged   passenger   compartment   filter   may  
h

ave
 
an
 
adverse   effect   on   the   per formance  
o

f
 
the
 
air
 
conditioning   system   and   generate  
u

ndesirable
 o
dours.
Checks

01
196
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
On / Off.
FIRST STEPS
Volume adjustment.
Select
 
screen   display  
between

  modes:
Full
 
screen:  
Audio
  (or  
telephone

  if   call   in   progress)   /
In
 
a
 
window:  
Audio
  (or  
telephone

  if   call   in   progress)   -
Time
 
or
 
T
rip   computer.
Long
 
press:   black   screen  
(DARK).
Select

 
AM
  /   FM   wavebands. Select
  preset   radio   station.
Long
  press:   store   a   station.
Display
  the   list   of   stations   received,  
CD/MP3

  tracks   or   folders.
Long
  press:   managing   the  
classification

  of   MP3/WMA
 
files   /  
update

  the   list   of   stations   received.
TA
 

(Traffic  
Announcement)
 
function

  On   /   Off.
Long   press:   access   to   type  of
  information.
Confirmation  
or

  display   of  
contextual

  menu.Automatic
  search   up   /   down  
for

  radio   frequencies.
Select
  previous   /   next   CD,  
USB,

  streaming   track.
Navigation
  in   a   list.
Abandon
  the   current   operation.
Up
  one   level   (menu   or   folder).
Manual
  step   by   step   search   up   /   down   for  
radio

  frequencies.
Select   previous   /   next   MP3   folder.
Select   previous   /   next   folder   /   genre   /   artist   /  
playlist

  in   the   USB   device.
Navigation   in   a   list.
Select   source:
Radio,   CD,  
AUX,
  USB,  
Streaming.
Accept

  an   incoming   call.
Access   to   main   menu.
Audio
  settings:
audio
  ambiences,   treble,   bass,  
loudness,

  distribution,   left/
right
  balance,   front/rear   fader,  
automatic

  volume.

03
198
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
MAIN MENU
"Multimedia": Media parameters,  Radio  
parameters.
Screen C
"Trip computer": Warning   log.
"Telephone":
 
Call,
 
Directory
 management,
 T
elephone
 
management,

 
Hang
 
up. "Personalisation-configuration
":  
Define

  the   vehicle   parameters,   Choice   of  
language,

  Display   configuration,   Choice  
of

  units,   Date   and   time   adjustment.
For   a   detailed   global   view   of   the   menus  
available,

  refer   to   "Screen   menu   map"  
section.
"

Bluetooth connection
": 
Connections

 
management,  
Search

 
for
 
a
 
device.

04
199
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
AUDIO
Press SRC/TEL several times in succession  and   select   radio.
Press BAND
 

to   select   a   waveband. Press LIST
 

to   display   the   list   of   stations  
received

  in   alphabetical   order.
A
 
press   changes   to   the   next   or   previous  
letter

  (e.g.  
A,
  B,   D,   F,   G,   J,   K,   ...).
Radio
Select the desired radio station by turning  the   control   knob   and   confirm   by  
pressing.
Selecting a station
A
 
long   press   on  
LIST 
builds   or   updates  
the

  list   of   stations;   audio   reception   is   cut  
momentarily

.
The
 
exterior
 
environment
 
(hills,
 
buildings,
 
tunnel,
 
car
 
park,
 
below
 
ground...)

 
may
 
prevent
 
reception,
 
even
 
in
 
RDS
 
station
 
tracking
 
mode.

 
This

 
phenomenon
 
is
 
normal
 
in
 
the
 
propagation
 
of
 
radio
 
waves

 
and
 
is
 
in
 
no
 
way
 
indicative
 
of
 
a
 
fault
 
with
 
the
 
audio
 
system.

04
TA
200
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
RDS, if displayed, enables you to continue listening to the same station  by   automatic   retuning   to   alternative   frequencies.   However,  
in

  certain   conditions,   coverage   of   an   RDS   station   may   not   be  
assured

  throughout   the   country   as   radio   stations   do   not   cover  
100

  %   of   the   territory.  
This
  explains   the   loss   of   reception   of   the  
station

  during   a   journey.
AUDIO
RDS Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic  
report

  is   transmitted,   the   current   audio   source   (Radio,   CD,  
USB,

  ...)   is   interrupted   automatically   to   play   the  
T
A
 
message.  
Normal

  playback   of   the   audio   source   resumes   at   the   end   of   the  
transmission

  of   the   message.
Press TA
 

to   activate   or   deactivate   the  
reception

  of   traffic   messages.
When
 
the
 
radio
 
is
 
displayed
 
on
 
the
 
screen,

 
press
 
the
 
control
 
knob
 
to
 
display
 
the

 
contextual
 
menu.
Select "RDS"
 
and
 
confirm
 
to
 
save.
"RDS"
 
is
 
displayed
 
in
 
the
 
screen.

04
201
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
AUDIO
Radio text is information transmitted by the radio station related to the  current   programme   or   song.
With
  the   radio   displayed   on   the   screen,  
press

  the   control   knob   to   display   the  
contextual

  menu.
Turn
  the   control   knob   to   select   "RADIO
TEXT"
  then   press   to   confirm.
Display RADIO TEXT
Screen C