Bolt JAGUAR XFR 2010 1.G Owners Manual

2. CAUTION: Install a new friction washer before
installing the crankshaft pulley.
NOTES:


Make sure to clean the threads in the end of the
crankshaft and that the crank nose is free of any foreign
materials.


Skip to step 11 for engines fitted with early RH thread
crankshaft bolt.












3. Install the special tool. www.JagDocs.com

10.























11.
12. WARNING: Make sure that a new bolt is installed.

Apply loctite 270 to the thread of the bolts.
Torque: 65 Nm





















WARNING: Make sure that a new bolt is installed.























Install the special tool.

18.























19. WARNING: Make sure that a new bolt is installed.

Apply loctite 270 to the thread of the bolts.

Torque: 65 Nm

4. NOTE: Tighten the bolts in the indicated sequence.
Special Tool(s): JLR-303-1622 Torque: 11 Nm

3. CAUTION: Make sure that new cylinder head bolts are
installed.


NOTE: Tighten the bolts in the indicated sequence.
Torque: 20 Nm


























4. NOTE: Tighten the bolts in the indicated sequence.
Torque: 35 Nm

5. NOTE: Tighten the bolts in the indicated sequence.
Tighten the bolts 1 to 10, a further 90 degrees.































6. NOTE: Tighten the bolts in the indicated sequence.
Tighten the bolts 1 to 10, a further 120 degrees. www.JagDocs.com

7.
















8.
9.
10. Torque: 25 Nm

















NOTE: Tighten the bolts in the indicated sequence.

Torque: 12 Nm













CAUTIONS:


If a new cylinder head has been installed then new
tappets must be installed.


If the cylinder head is being removed without a new
component being installed, the tappets must be installed in
their original positions.
Lubricate the valve tappets with clean engine oil.







Torque: 10 Nm

20.



































21. CAUTION: Discard the bolts.



































NOTE: Discard the gasket.

3. CAUTION: Make sure that new cylinder head bolts are
installed.
Torque: 20 Nm






























4. Torque: 35 Nm

5.
6. CAUTION: Discard the bolt.

NOTE: Some variation in the illustrations may occur,
but the essential information is always correct.












7.
8.