display Lexus IS220d 2012 Navigation manual

93
2. ROUTE GUIDANCE
3
NAVIGATION SYSTEM
ISF_IS_ISC_Navi_EE
5. SETTING ROUTE
1Press the “NAV” button, and touch
“Menu” if the map screen is dis-
played.
2Touch “Route”.
3Perform operations according to the
procedures outlined on the following
pages.
On this screen, the following operations
can be performed:
Detour and route conditions can be
set and destinations can be added.
No.FunctionPage
Touch to set search con-
ditions.95
Touch to set detours.96
Touch to set road prefer-
ences.97
Touch to add destina-
tions.94
Touch to delete destina-
tions.95
Touch to reorder desti-
nations.94
Touch to display route
overview.98
Touch to set route trace.99

94
2. ROUTE GUIDANCE
ISF_IS_ISC_Navi_EE
1Press the “NAV” button.
2Touch “Menu” on the map screen.
3Touch “Route” on the “Menu”
screen.
4Touch “Add”.
5Input an additional destination in the
same way as a destination search.
(See “DESTINATION SEARCH”
on page 62.)
6Touch the desired “Add destination
here” to insert the new destination
into the route.
The route overview screen will be dis-
played. (See “ROUTE OVERVIEW”
on page 98.)
1Press the “NAV” button.
2Touch “Menu” on the map screen.
3Touch “Route” on the “Menu”
screen.
4Touch “Reorder”.
5Touch the desired destination and
touch “Move up” or “Move down”
to change the arrival order.
6After selecting the destinations,
touch “OK”.
The system searches for the guidance
route again, and displays the entire
route.
ADDING DESTINATIONS
Destinations can be added and routes
can be searched again.
REORDERING
DESTINATIONS
When more than 1 destination is set,
the arrival order of the destinations
can be changed.

95
2. ROUTE GUIDANCE
3
NAVIGATION SYSTEM
ISF_IS_ISC_Navi_EE
1Press the “NAV” button.
2Touch “Menu” on the map screen.
3Touch “Route” on the “Menu”
screen.
4Touch “Delete”.
When more than 1 destination is set, a
list will be displayed on the screen.
5Touch the destination to be deleted.
“Delete all”: Touch to delete all destina-
tions on the list.
A message appears to confirm the
request to delete.
6Touch “Yes” to delete the destina-
tion(s).
If “Yes” is touched, the data cannot be
recovered. If more than 1 destination
has been set, the system will recalculate
the route(s) to the set destination(s) as
necessary.
If “No” is touched, the previous screen
will be displayed.
1Press the “NAV” button.
2Touch “Menu” on the map screen.
3Touch “Route” on the “Menu”
screen.
4Touch “Search condition”.
5Touch “Quick”, “Quick 1”, “Quick
2” or “Short” and then touch “OK”.
DELETING DESTINATIONS
A set destination can be deleted.
SEARCH CONDITION
Road conditions of the route to the
destination can be set.

96
2. ROUTE GUIDANCE
ISF_IS_ISC_Navi_EE
6The entire route from the starting
point to the destination is displayed.
1Press the “NAV” button.
2Touch “Menu” on the map screen.
3Touch “Route” on the “Menu”
screen.
4Touch “Detour”.
5Touch a screen button to select the
desired detour distance.
No.Function
Touch to change a route. (See
page 93.)
Touch to start guidance.
DETOUR SETTING
While the route guidance is operat-
ing, the route can be changed to de-
tour around a section of the route
where a delay is caused by road re-
pairs, an accident, etc.

97
2. ROUTE GUIDANCE
3
NAVIGATION SYSTEM
ISF_IS_ISC_Navi_EE
“1mile (km)”, “3miles (km)” or “5miles
(km)”: Touch one of these screen but-
tons to start the detour process. After de-
touring, the system returns to the
original guidance route.
“Whole route”: Touch to make the sys-
tem calculate an entire new route to the
destination.
“Around traffic event”: Touch to make
the system search for the route based on
the traffic congestion information re-
ceived.
1Press the “NAV” button.
2Touch “Menu” on the map screen.
3Touch “Route” on the “Menu”
screen.
4Touch “Road preferences” to display
conditions that can be selected when
the system determines the route to
the destination.
5Select the desired road preferences.
The system will avoid using routes that
include items whose indicators are off.
6After selecting the desired road pref-
erence, touch “OK”.
INFORMATION
This picture shows an example of
how the system would guide around a
delay caused by a traffic jam.
This position indicates the location
of a traffic jam caused by road re-
pairs, an accident, etc.
This route indicates the detour sug-
gested by the system.
When the vehicle is on a motorway,
the detour distance selections are 5,
15 and 25 miles (or 5, 15 and 25 km if
units are in km).
The system may not be able to calcu-
late a detour route depending on the
selected distance and surrounding
road conditions.
ROAD PREFERENCE
A number of choices are available
when setting the conditions the sys-
tem uses to determine the route to the
destination.

98
2. ROUTE GUIDANCE
ISF_IS_ISC_Navi_EE
1Press the “NAV” button.
2Touch “Menu” on the map screen.
3Touch “Route” on the “Menu”
screen.
4Touch “Route overview”.
5The entire route from the current po-
sition to the destination is displayed.
1Touch or to skip to the next
page of the list of roads. Touch and
hold or to scroll through the list
of roads.
: This mark indicates the direction in
which you should turn at the intersec-
tion.
“Map”: The selected point is displayed
on the map screen.
ROUTE OVERVIEW
No.Function
Touch to display a list of the turns
required to reach the destination.
Touch to change the route. (See
page 93.)
Touch to start guidance.
TURN LIST
INFORMATION
However, not all road names in the
route may appear on the list. If a road
changes its name without requiring a
turn (such as on a street that runs
through 2 or more towns), the name
change will not appear on the list. The
street names will be displayed in
order from the starting point, along
with the distance to the next turn.

99
2. ROUTE GUIDANCE
3
NAVIGATION SYSTEM
ISF_IS_ISC_Navi_EE
1Press the “NAV” button, and touch
“Menu” if the map screen is dis-
played.
2Touch “Route” on the “Menu”
screen.
3Touch “Start route trace”.
1Press the “NAV” button, and touch
“Menu” if the map screen is dis-
played.
2Touch “Route” on the “Menu”
screen.
3Touch “Stop route trace”.
Touching “Yes” stops recording and the
route trace remains displayed on the
screen.
Touching “No” stops recording and the
route trace is erased.
ROUTE TRACE
Up to 124 miles (200 km) of the trav-
eled route can be stored and retraced
on the display.
INFORMATION
This feature is available when the
map scale is more than 30 miles (50
km).
TO START RECORDING THE
ROUTE TRACE
TO STOP RECORDING THE
ROUTE TRACE

100
2. ROUTE GUIDANCE
ISF_IS_ISC_Navi_EE
6. DISPLAY POI ICONS
1Press the “NAV” button, and touch
“Menu” if the map screen is dis-
played.
2Touch “Show POI”.
3A screen with a limited choice of
POIs will be displayed.
To change the displayed POI list, see
page 126.
1Press the “NAV” button, and touch
“Menu” if the map screen is dis-
played.
2Touch “Show POI” on the “Menu”
screen.
3Touch the desired POI category to
display POI location icons on the
map screen.
By touching the desired POI category
and then touching “OK”, the selected
POI icons are displayed on the map
screen.
To turn off the POI icons on the map
screen, touch “All off”.
“Other POI’s”: Touch to display other
POIs categories if the desired POIs can-
not be found on the limited choice
screen.
“List nearest POI’s”: Touch to search
for the nearest POIs. Then select one of
the categories. The system will list the
points within 20 miles (30 km). (See
page 102.)
POI icons such as petrol stations and
restaurants can be displayed on the
map screen. Their location can also
be set as a destination and used for
route guidance.SELECTING POI ICONS TO
BE DISPLAYED
Up to 5 categories of icons can be
displayed on the map screen.

101
2. ROUTE GUIDANCE
3
NAVIGATION SYSTEM
ISF_IS_ISC_Navi_EE
1Touch “Other POI’s”.
When a POI category is selected from
either the limited list or the complete
list, the icons of those locations will be
displayed on the map screen.
2Touch the desired POI categories.
The selected category’s icon will
appear on the top left of the screen.
By touching the desired POI category
and then touching “OK”, the selected
POI icons are displayed on the map
screen.
If the desired POI category is not on the
screen, touch “List all categories” to list
all POI categories.Touch the desired POI categories from
the list.
• The selected category’s icon will
appear on the top left of the screen.
• By touching the desired POI category
and then touching “OK”, the selected
POI icons are displayed on the map
screen.
• To return to the POI category selec-
tion screen, touch “More”.
SELECTING OTHER POI
ICONS TO BE DISPLAYED

102
2. ROUTE GUIDANCE
ISF_IS_ISC_Navi_EE
1Touch “List nearest POI’s”.
2Touch the screen button of the de-
sired POI.
The selected POIs are displayed on the
map screen.
“On route”: When the indicator is illu-
minated by touching this screen button,
the list of the items searched along the
route is displayed.
1Directly touch the desired POI icon
to set it as a destination.
The map will shift so that the icon is
centred on the screen and overlaps with
the cursor . At this time, the distance
from the current position is displayed
on the screen. The distance shown is
measured as a straight line from the
current position to the POI.
2When the desired POI overlaps with
the cursor, touch “Enter ”.
The screen changes and displays the
map location of the selected destination
and road preference. (See “STARTING
ROUTE GUIDANCE” on page 81.)
TO DISPLAY THE LOCAL
POI LIST
Points of Interest that are within 20
miles (30 km) of the current position
will be listed from among the select-
ed categories.TO SET A POI AS A
DESTINATION
One of the Point of Interest icons can
be selected on the map screen as a
destination and can be used for route
guidance.