change wheel MERCEDES-BENZ SPRINTER 2013 MY13 Operator’s Manual

X
Slowly lowe rspare wheel bracket 0023to the
ground.
X Lift spare wheel bracket 0023slightly and pull
the pump lever out of sleeve 0025.Spare wheel in the spare wheel carrier
X
Use the pump lever to lift the spare wheel
beyond the rear edge of the spare wheel
carrier.
X Carefully remove the spare wheel from
spare wheel bracket 0023.
The spare wheel is heavy. When the spare
wheel is removed, the center of gravity
changes due to the heavy weight of the
wheel. The spare wheel may slip down or
tip over.
Installing
X Carefully place the spare wheel onto spare
wheel bracket 0023.
The spare wheel is heavy. When you place
the spare wheel onto spare wheel bracket
0023, the center of gravity changes due to the
weight of the wheel. The spare wheel may
slip down or tip over.
X Slide the pump lever for the jack into
sleeve 0025on spare wheel bracket 0023.
X Raise spare wheel bracket 0023with the
pump lever and attach right-hand retaining
hook 0026.
X Slightly raise spare wheel bracket 0023and
attach left-hand retaining hook 0026.
X Pull the pump lever out of sleeve 0025.
X Using the lug wrench, tighten the retaining
hook bolts by turning them clockwise. X
Replace and engage covers 0005.
X Close the rear doors.
Chassis version Removing
X
Loosen fender nuts 0026manually and then
remove them.
X Loosen nuts 0006as far as the thread end.
X Slightly raise spare wheel bracket 0025and
unhook left-hand retaining hook 0005.
X Assemble the pump lever for the jack and
slide it into the sleeve on the right-hand
side of spare wheel bracket 0025.
X Raise spare wheel bracket 0025with the
pump lever and unhook right-hand
retaining hook 0005.
X Slowly lower spare wheel bracket 0025down
to the ground.
X Lift spare wheel bracket 0025slightly and pull
the pump lever out of the sleeve. 310
Spare wheelWheels and tires

X
Use the pump lever to lift the spare wheel
beyond the rear edge of spare wheel
bracket 0025.
X Carefully remove the spare wheel from the
bracket.
The spare wheel is heavy. When the spare
wheel is removed, the center of gravity
changes due to the heavy weight of the
wheel. The spare wheel may slip down or
tip over.
Installing
X Carefully place the spare wheel onto spare
wheel bracket 0025.
The spare wheel is heavy. When you place
the spare wheel onto spare wheel
bracket 0025, the center of gravity changes
due to the weight of the wheel. The spare
wheel may slip down or tip over.
X Raise spare wheel bracket 0025with the
pump lever and attach right-hand retaining
hook 0005.
X Slightly raise spare wheel bracket 0025and
attach left-hand retaining hook 0005.
X Pull the pump lever out.
X Tighten nuts 0006.
X Put fender nuts 0026in place and tighten
them. Spare wheel
311Wheels and tires Z