RENAULT KANGOO 1997 KC / 1.G Sheet Metal Work Workshop Manual
Manufacturer: RENAULT, Model Year: 1997, Model line: KANGOO, Model: RENAULT KANGOO 1997 KC / 1.GPages: 255
Page 241 of 255

SIDE OPENING ELEMENTS
Front door stiffener
47C
PRB4710
INTRODUCTION
The replacement of this part is a complementary
operation to the front door panel.
In the operation described below there are only
descriptions of the joints specific to the part
concerned.
Information concerning other parts will be dealt
with in the respective section.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part only.
JOINTS WITH:
Door box section
Stiffener
PARTS CONCERNED (thickness in mm):
1Door box section 0.8
2Stiffener 1.2
3Lock striker plate reinforcement 1.2
47-6
Page 242 of 255

SIDE OPENING ELEMENTS
Front door stiffener
47C
13472R13472-1R
CAA11538R7
A
1
2
CAA11538R3
B
32
47-7
Page 243 of 255

SIDE OPENING ELEMENTS
Side door
47D
PRB4709
REMOVAL OF THE SLIDING DOOR
12978R
Remove :
- the rear stop,
13105R
- pin.
47-8
Page 244 of 255

SIDE OPENING ELEMENTS
Side door
47D
12979R
REMOVAL OF INTERMEDIATE RUNNER
MOUNTINGS REMOVAL OF UPPER RUNNER MOUNTINGS
Remove the inner trim.
12977R
12976R
47-9
Page 245 of 255

SIDE OPENING ELEMENTS
Side door
47D
REMOVAL THE LOWER RUNNER MOUNTINGS
12975R
13106R
Remove the lower trim according to version.
REFITTING
Refit in the opposite way to removal and refer to
section 51 - sliding door mechanism, to make ad-
justments.
47-10
Page 246 of 255

SIDE OPENING ELEMENTS
Side door panel
47E
PRB4708
INTRODUCTION
The replacement of this part is a basic operation
for a side impact.
This part may be replaced partially (see cut and
method below).
In the operation described below there are only
descriptions of the joints specific to the part
concerned.
Information concerning other parts will be dealt
with in the respective section.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part assembled with soundproofing pads.
JOINTS WITH:
Door box section
Anti-intrusion reinforcement
Stiffener
PARTS CONCERNED (thickness in mm):
1Door box section 0.8
2Anti-intrusion reinforcement 1.2
3Door panel 0.8
4Stiffener 1.2
or
Only for the glazed version.
NOTE : for panel versions, the whole panel should
be replaced.
47-11
Page 247 of 255

SIDE OPENING ELEMENTS
Side door panel
47E
13346R
CAN11689R1
A
3 2
B
1
2
CAV13463R1
H
3
4
CAT13318R2
1 3
1 2
47-12
Page 248 of 255

SIDE OPENING ELEMENTS
Side door panel
47E
13345R
or
CAS13033R3
C
3 3
E - G
1
2
CAQ11697R5
D
1 3
CAT13318R1
13
12
47-13
Page 249 of 255

SIDE OPENING ELEMENTS
Side door stiffener
47F
PRB4710
INTRODUCTION
The replacement of this part is a complementary
operation to the side door panel.
In the operation described below there are only
descriptions of the joints specific to the part
concerned.
Information concerning other parts will be dealt
with in the respective section.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part only.
JOINTS WITH:
Door box section
Stiffener
PARTS CONCERNED (thickness in mm):
1Door box section 0.8
2Stiffener 1.2
3Rail roller reinforcement 1.2
47-14
Page 250 of 255

SIDE OPENING ELEMENTS
Side door stiffener
47F
13608R
CAA11538R7
A
1
2
CAB11539-1R1
B
32
47-15