ESP RENAULT SCENIC 2008 J84 / 2.G LPN Radio Owner's Guide
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2008, Model line: SCENIC, Model: RENAULT SCENIC 2008 J84 / 2.GPages: 93, PDF Size: 0.25 MB
Page 79 of 93
86A-79
MR-372-J84-86A050$944.mif
V3
LPN RADIO
Vdiag No.: C4RADIO
Fault finding - Fault Finding Chart86A
ALP 12 Front panel button fault
NOTESOnly check the customer complaint after performing a full check with the diagnostic
tool.
Ensure there are no present or stored faults.
Use the wiring diagrams Technical Note for Scénic II ph2, Espace IV ph2,
Trafic II ph2 or Kangoo 2.
Also check for a + 12 V battery feed on connection BP26 (Kangoo 2), BP26 (Trafic II ph2), BCP4 (Espace IV
ph2) or BCP3 (Scénic II ph2) and an earth on connection MT (Kangoo 2), MT (Trafic II ph2 and Scénic II ph2)
or MV (Espace IV ph2) on the black 8-track connector of component 261.
If the connection is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the wiring. Otherwise replace the wiring.
Check that the statuses of the front panel buttons are consistent during use (see Conformity check).
Do all the front panel buttons operate correctly?
NO YES
Check that no buttons are jammed.
If a button remains jammed, contact the Techline.
End of fault finding.
If the fault is still present, contact the Techline.
AFTER REPAIRCarry out a complete check with the diagnostic tool.
LPN_VC4_ALP12
Page 87 of 93
86A-87
MR-372-J84-86A050$944.mif
V3
LPN RADIO
Vdiag No.: C4RADIO
Fault finding - Fault Finding Chart86A
ALP 18
CONTINUED 1
Match up the navigation and communication system
and the telephone.
Was the match successful?
YES
Check that the telephone does not require
confirmation before being connected to the
Bluetooth system.
If it does, respond that you wish to connect then
disable this function on the phone.
NO
Test the Bluetooth terminal on the
navigation computer.
Procedure for matching the communication
system and the telephone:
On the navigation and communication system:
–Press the SET button.
–Access the Telephone menu.
–Select the Bluetooth option line.
–Select the Save a Bluetooth telephone line.
On the telephone:
–Enter the menu to find a Bluetooth accessory.
–In the list of accessories found, select My CAR.
–Enter the PIN code given on the vehicle's
navigation display.
AFTER REPAIRCarry out a complete check with the diagnostic tool.
B
Page 93 of 93
86A-93
MR-372-J84-86A050$944.mif
V3
RADIO
Fault finding - Fault Finding Chart
LPN RADIO
Vdiag No.: C4
86A
*LPN: Low Price Navigation
ALP 22 No LPN* radio navigation backlighting
NOTESSwitch on the + after ignition feed to enter fault finding mode with the computer.
Ensure there are no present or stored faults.
Use the wiring diagrams Technical Note for Scénic II ph2, Espace IV ph2,
Trafic II ph2 or Kangoo 2.
Run fault finding on the multimedia network interface unit (see 86D, Multimedia network interface unit).
AFTER REPAIRCarry out a complete check with the diagnostic tool.
LPN_VC4_ALP22