4215-5. Using the audio/visual system
5
Entune audio
and vertically.
■Contrast and brightness
adjustment
The contrast and brightness of
the screen can be adjusted.
1 Press the “MENU” button.
2 Select “Setup”.
3 Select “Audio”.
4 Select “Common”.
5 Select “Display”.
6 Select the desired item to be
adjusted.
“Contrast”
“+”: Select to strengthen the con-
trast of the screen.
“-”: Select to weaken the contrast of
the screen.
“Brightness”
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
●Depending on the audio source,
some functions may not be avail-
able.
1 Press this switch to operate
the voice command system.
The voice command system
and its list of commands can
be operated. ( P.450)
Voice command system
4225-6. Radio operation
5-6.Radio operation
The radio operation screen can
be reached by the following
methods:
P. 4 1 8
Select to display the audio
source selection screen.
Select to display the preset
stations screen. ( P.422)
Select to display a list of
receivable stations. ( P.423)
Select to display the radio
options screen. ( P.423)
Select to display the sound
setting screen. ( P.419)
Select to tune to preset sta-
tions/channels. ( P.422) Press to seek for stations in
the relevant program type.
Press and hold for continu-
ous seek.
Turn to step up/down fre-
quencies.
Turn to move up/down the
station. Also, the knob can be
used to enter selections on
the list screens by pressing it.
●The radio automatically changes
to stereo reception when a stereo
broadcast is received.
Radio mode has a mix preset
function, which can store up to
36 stations (6 stations per page
x 6 pages) from any of the AM
or FM bands.
1
Tune in the desired station.
AM/FM radio
Overview
Control screen
A
B
C
D
E
F
&