INSTALLATION INFINITI QX4 2001 Factory Repair Manual

SBT035A
Defroster grille
REMOVAL
Insert a cloth-covered flat-bladed screwdriver into the grilles of the
outside, center and central grilles, respectively, lift up the front of
the grilles and remove.
INSTALLATION
After inserting the front section, insert the rear section (pawls) to
attach.
CAUTION:
Confirm that the pawls at the rear are securely attached.
SBT036A
Side ventilator-left
Insert a cloth-covered flat-bladed screwdriver into the lower
section, and pull out forward.
SBT037A
Side ventilator-right
Insert a cloth-covered flat-bladed screwdriver into the corner of the
lower section, and pull out forward. (Securely press the screwdriver
against the ventilator.) Or, after removing the instrument lower
panel, push the ventilator out from the back.
Side defroster grille
After removing the side ventilator, reach in with hands from the
opening, push on the pawls from behind the grille, and remove by
pushing out.
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
HA
SC
EL
IDX
INSTRUMENT PANEL ASSEMBLY
Removal and Installation (Cont'd)
BT-27

Removal and InstallationNBBT0009CAUTION:
Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.
1. Remove front and rear seats. Refer to ªFRONT SEATº and ªREAR SEATº for details, BT-41, BT-44.
2. Remove front and rear seat belts. Refer to RS-4 and RS-5, ªFront Seat Beltº and ªRear Seat Beltº for
details.
3. Remove front and rear kicking plates.
4. Remove dash side lower finishers.
5. Remove front and rear body side welts.
6. Remove front pillar garnishes.
7. Remove center assist grips.
8. Remove center pillar lower garnishes.
9. Remove center pillar upper garnishes.
10. Remove rear gate kicking plate.
11. Remove rear net hooks.
12. Remove tonneau cover assembly and rear parcel holder.
13. Remove rear side lower garnishes.
14. Remove rear side upper garnishes.
SBT694
SIDE AND FLOOR TRIM
Removal and Installation
BT-28

SBT721
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
HA
SC
EL
IDX
SIDE AND FLOOR TRIM
Removal and Installation (Cont'd)
BT-29

Removal and InstallationNBBT0010Front Door Trim
1. Remove inside handle escutcheon.
2. Remove power window switch, then disconnect the connectors.
3. Remove door armrest.
4. Remove bolts securing door finisher.
5. Pull on door finisher to remove clips from door panel and remove door finisher, then disconnect glass hatch
and fuel lid opener switch connector.
Rear Door Trim
6. Remove inside handle escutcheon.
7. Remove power window switch, then disconnect the connector.
8. Remove door armrest cap.
9. Remove bolts securing door finisher.
10. Pull on door finisher to remove clips from door panel and remove door finisher.
SBT696
DOOR TRIM
Removal and Installation
BT-30

SBT697
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
HA
SC
EL
IDX
DOOR TRIM
Removal and Installation (Cont'd)
BT-31

Removal and InstallationNBBT00111. Remove front and rear seats. Refer to ªFRONT SEATº and ªREAR SEATº for details, BT-41, BT-44.
2. Remove front and rear seat belts. Refer to RS-4 and RS-5, ªFront Seat Beltº and ªRear Seat Beltº for
details.
3. Remove body side trim. Refer to ªSIDE AND FLOOR TRIMº for details, BT-28.
4. Remove roof console assembly.
5. Remove inside mirror assembly.
6. Remove sun visors.
7. Remove interior lamp assembly and luggage room lamp assembly.
8. Remove assist grips.
9. Remove clips securing headlining.
10. Remove rear roof garnish.
11. Remove headlining from vehicle through either back door.
ROOF TRIM
Removal and Installation
BT-32

SBT487
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
HA
SC
EL
IDX
ROOF TRIM
Removal and Installation (Cont'd)
BT-33

Removal and InstallationNBBT00121. Remove back door grip.
2. Remove back door finisher assembly.
3. Remove high-mounted stop lamp.
4. Remove back door upper finisher assembly.
SBT223
BACK DOOR TRIM
Removal and Installation
BT-34

Removal and InstallationNBBT0013
SBT494
GI
MA
EM
LC
EC
FE
AT
TF
PD
AX
SU
BR
ST
RS
HA
SC
EL
IDX
EXTERIOR
Removal and Installation
BT-35

SBT722
EXTERIOR
Removal and Installation (Cont'd)
BT-36